GreatNeck 68011 Magnetic Socket Holder Drive, 3/8 Inch
- Drive magnetic socket holder creates storage and adds organization to the work area. It holds up to 10 sae or metric sockets at every angle. The holder stays secure to ferrous metal surfaces with a rubber coated magnet that will not mar or scratch surfaces. The great neck 3/8 in.
Mechanics Time Savers (MTS382) 3/8 in. Drive Universal Magnetic Hot Pink Socket Holder 10-19mm
- Manufacturermechanics time saver382hot pink universal magnetic socket holderfeatures and benefits originally designed to holda standard 8-piece universal (swivel) socket set, this organizer will also store tools with the same style drive end. Hot pink. Accommodates 3/8 thru 3/4 sae and/or 10 thru 19 mm. Use it to organize long and short chrome flex sockets, hex heads, flat tips, phillips tips, torx heads with the same sizedrive ends, welding tips, a/c fittings, and extensions.
Green Tools 3/8 Drive Magnetic Socket Holder Best Organizer for All Types of Sockets
- This magnetic socket holder is great for holding your sockets in any type of position, vertical, horizontal, or even upside down have your sockets at your fingertips no matter where you are working.
3/8” SAE Magnetic Socket Holder (EZR-SHS38)
- Grease, oil, chemical and rust resistant. Standard, metric, shallow or deep sockets are no challenge for mag-clip magnetic socket holders. 3/8″ sae magnetic socket holder (ezr-shs38). Permanent rare earth magnets hold sockets tight and in place without magnetizing them. Magnetic socket holder will hold sockets tight without magnetizing them. Magnets retain strength permanently with no loss in holding capability over time. 1/4-inch magnetic socket holder strip for small sockets with permanent power pegs attached will never come loose or fall out. Grease, oil, chemical and rust resistant with tough polymer base.
14-slot Universal Magnetic Socket Holder Disc for 1/4, 3/8, 1/2-inch Drives
- Holes vary from 1/2 to 7/8-inch diameter to fit your whole set. Coated magnet will not mar painted surfaces holder is 3-1/2-inches in diameter. Holds up to 14 sockets in 1/4, 3/8, 1/2-inch drives. Powerful magnet holds sockets securely, even vertically. Holds shallow or deep well sockets in sae and metric sizes.
Lisle 40130 and 40990 Black Magnetic Socket Holder Set, 1/4″ Drive and 1/2″ Drive
- Organizes 1/4″ drive and 1/2″ drive sae and metric sockets. 1/2″ socket holder has 22 socket compartments–1/4″ socket holder has 26 socket compartments. Rubber feet protect toolbox from scratching. Made of strong abs plastic. Powerful magnets securely holds sockets in tray and to any steel surface.
1/4 Inch Magnetic Socket Holder – Black -2Pack
- Organizes 1/4 inch sae and metric sockets 26 socket compartments allows you to keep all your 1/4 inch sockets in one convenient holder holds sockets up to 5/8 inch and 15 mm easy identification powerful magnets securely hold sockets in tray and tray to any steel surface made of abs plastic.
Olsa Tools | Magnetic Socket Holder | 1/2″ Drive Rotating Clips | Red Aluminum + Black Clips | Made with rare neodymium magnet
- Secure your sockets, spring loaded ball bearings on each clip hold sockets firmly and securely. Strong magnet, holds tool organizer onto your tool box and won’t scratch due to its thin foam protection. Made to last, heavy duty and durable tool organizer made of high quality materials. 1/2-inch drive magnetic socket holder. The perfect organizer, holds 16 sockets on rotating clips.
Grip 1/4″ Magnetic Socket Holder
- Heavy duty steel with magnetic strips to hold up to 10 sockets at any angle. A great way to keep sockets organized, but readily available for use. Can be used for both mm and sae, as well as, shallow and deep sockets.
1/4 Inch Magnetic Socket Holder – Red -2Pack
- Organizes 1/4 inch sae and metric sockets 26 socket compartments allows you to keep all your 1/4 inch sockets in one convenient holder holds sockets up to 5/8 inch and 15 mm easy identification powerful magnets securely hold sockets in tray and tray to any steel surface made of abs plastic.
3/8″ Drive Universal Magnetic Socket Holder Black
- Magnetic socket holder will hold sockets tight without magnetizing them. Interchangeable rare earth magnets hold sockets tight and in place without magnetizing them. Grease, oil, chemical and rust resistant. Grease, oil, chemical and rust resistant with tough polymer base. Hangs or mounts on any smooth metal surface mounted vertically or horizontally. 1/2-inch magnetic socket holder strip includes interchangeable pegs that can be removed and replaced with additional sizes if required. 3/8″ metric magnetic socket holder (ezr-shm38). Standard, metric, shallow or deep sockets are no challenge for mag-clip magnetic socket holders.
3/8 Inch Magnetic Socket Holder Red-2pack
- Organizes 3/8 inch fractional and metric socketstwenty-eight socket compartments that allow you to keep your 3/8 inch standard and deep sockets in one convenient holderholds sockets up to 1 inch or 24mmdesign of holders leaves sockets exposed for easy identificationpowerful magnets securely hold sockets in tray and tray to any steel surfacemade of strong abs plasticfits most 3/8 inch socket sets.
1/2 Inch Magnetic Socket Holder Red-2pack
- Sizes 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm. 1/2 inch magnetic socket holder red-2pack. 3/8″ drive 26pc magnetic metric socket holder 13 deep 13 shallow. High-impact plastic with powerful magnetic rubber bases. Easily transferable from tool drawer to your work area, these holders will secure your tools to any metal surface.
Lisle 40130 1/4 Drive Black Magnetic Socket Holder for 26 Sockets
- Made of strong abs plastic. Design of holders leaves sockets exposed for easy identification. Holds sockets up to 5/8″ or 15 millimeter. Twenty-six socket compartments allow you to keep your 1/4″ standard and deep sockets in one convenient holder. Powerful magnets securely hold sockets in tray, and tray to any steel surface.
Triton Products 72401 MagClip Magnetic Socket Holder Strip 1/4-Inch Drive 2-1/4-Inch by 9-Inch, Red
- Magnetic socket holder will hold sockets tight without magnetizing them. 1/4-inch magnetic socket holder strip for small sockets with permanent power pegs attached will never come loose or fall out. Hangs or mounts on any smooth metal surface mounted vertically or horizontally. Grease, oil, chemical and rust resistant. Standard, metric, shallow or deep sockets are no challenge for mag-clip magnetic socket holders. Magnets retain strength permanently with no loss in holding capability over time. Permanent rare earth magnets hold sockets tight and in place without magnetizing them. Grease, oil, chemical and rust resistant with tough polymer base.
Mechanics Time Savers (MTS1282) 1/2 in. Drive Magnetic Pink Socket Holder 10-19mm
- Accommodates 3/8 thru 7/8 sae and/or 10 thru 19mm. Manufacturermechanics time saver1282 pink magnetic socket holderfeatures and benefits our 1/2 drive organizer will store bothshallow and deep sockets, sae and metric sizes. Pink sockets shown notincluded.
Triton Products 72400 MagClip Magnetic Socket Holder Strip and 10 Interchangeable Pegs 1/4-Inch Drive 1-7/8-Inch by 16-5/8-Inch, Red
- Grease, oil, chemical and rust resistant with tough polymer base. Magnets retain strength permanently with no loss in holding capability over time. 1/4-inch drive magnetic socket holder strip includes interchangeable pegs that can be removed and replaced with additional sizes if required. Standard, metric, shallow or deep sockets are no challenge for mag-clip magnetic socket holders. Magnetic socket holder will hold sockets tight without magnetizing them. Hangs or mounts on any smooth metal surface mounted vertically or horizontally. Interchangeable rare earth magnets hold sockets tight and in place without magnetizing them. Grease, oil, chemical and rust resistant.
1/2 Inch Magnetic Socket Holder Green-2pack
- Organizes 1/2 inch chrome and impact socketstwenty-two socket compartments allow you to keep your 1/2 inch standard and deep sockets in one convenient holderholds sockets up to 1 inch or 20mmdesign of holders leaves sockets exposed for easy identificationpowerful magnet holds sockets in trayrubber feet protect tool box from scratchingmade of strong abs plasticmade especially for impact socket sets.
1/2″ Drive 18pc Magnetic Metric Socket Holder 7 Deep 11 Shallow 1 Adapter
- 7 deep socket, 11 shallow socket. High-impact plastic with powerful magnetic rubber bases. Easily transferable from tool drawer to your work area, these holders will secure your tools to any metal surface. Sizes 10mm, 11mm, 1/2″, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 23mm, 24mm, 25mm, 26mm, 27mm, + 1 adapter holder. 1/2″ drive 18pc magnetic sae socket holder 7 deep 11 shallow 1 adapter.
GreatNeck 68010 Magnetic Socket Holder Drive, 1/4 Inch
- Drive magnetic socket holder creates storage and adds organization to the work area. The holder stays secure to ferrous metal surfaces with a rubber coated magnet that will not mar or scratch surfaces. The great neck 1/4 in. It holds up to 10 sae or metric sockets at every angle.
MagClip Magnetic Socket Holder : 3/8″ Mag Clip Strip
- 1/4-inch magnetic socket holder strip for small sockets with permanent power pegs attached will never come loose or fall out. 3/8″ sae magnetic socket holder (ezr-shs38). Magnets retain strength permanently with no loss in holding capability over time. Grease, oil, chemical and rust resistant with tough polymer base. Grease, oil, chemical and rust resistant. Standard, metric, shallow or deep sockets are no challenge for mag-clip magnetic socket holders. Permanent rare earth magnets hold sockets tight and in place without magnetizing them. Magnetic socket holder will hold sockets tight without magnetizing them.
Magnetic Socket Holder Tray – Metal – Red – 11 long”
- Holder neatly stores sockets for ease of finding such and of use. Overall dimensions 11″l x 3-1/2″h x 1-1/8″w. Powerfull magnets hold tray to your tool box or other steel surfaces. Can also be hung from to peg hooks on peg broad from the two holes. The tray area is 11″l x 1″ deep, front tray lip is about 1/2″ tall.
Vim Products (VIMMR12R20A) 12″ Red Magrail TL Magnetic Socket Holder, with 20 – 1/4″ Studs
- Limited lifetime warranty. Magrail tl organizers are available in red and blue anodized aluminum bodies with 1/4”, 3/8” or 1/2” pegs. Magrail tl can be customized to fit your applications. These pegs can be loosened and tightened anywhere along the center track of the magrail tl for the ultimate in tool box organization. Tool posts can be moved to suit your tools and desires. Magrail is fully magnetized on the top and bottom so tool sets can be fixed to any steel surface, even inside the lids of tool boxes and service bodies. It can be used to organize your sockets, extensions, pliers, screwdrivers, and virtually any ferrous metal tool. Features and benefits magrail tl magnetic tool organization product, patented. Please see the short magrail tl on u-tube, to get ideas as to the many uses of this hot new product.
3/8″ Drive 26pc Magnetic Metric Socket Holder 13 Deep 13 Shallow
- Easily transferable from tool drawer to your work area, these holders will secure your tools to any metal surface. 13 deep socket, 13 shallow socket. 3/8″ drive 26pc magnetic metric socket holder 13 deep 13 shallow. Sizes 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm. High-impact plastic with powerful magnetic rubber bases.
Lisle LI40210 Black Magnetic Socket Holder for 3/8″ Socket
- Magnets hold sockets in tray and tray to steel surface. Features 28 socket compartments for both standard and deep sockets. Made of abs plastic for durability. Organizes 3/8″ fractional and metric sockets for easy storage. Open sign for easy identification of sockets.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
