Top 21 Welding Wires for 2020

 

YESWELDER ER70S-6 030-Inch on 10-Pound Spool Carbon Steel Mig Solid Welding Wire

YESWELDER ER70S-6 .030-Inch on 10-Pound Spool Carbon Steel Mig Solid Welding Wire

YESWELDER ER70S-6 .030-Inch on 10-Pound Spool Carbon Steel Mig Solid Welding Wire - 10-pound spool. Great for construction work, farm implement fabrication, shaft buildup, tanks, truck bodies and general shop applications with poor fit-up or rusty, oily plates. Er70s-6 is the most common of the copper-coated mild steel gmaw (mig) wires for single or multiple pass welding. Er70s-6 has the highest combination of manganese and silicon deoxidizers, permitting higher welding currents with 100% co2 shielding gas and leaving a smoother weld bead with little to zero post-weld cleanup.

 

Blue Demon E71T-11M X 035 X 11LB Spool gas shielded flux core welding wire

Blue Demon E71T-1/1M X .035 X 11LB Spool gas shielded flux core welding wire

Blue Demon E71T-1/1M X .035 X 11LB Spool gas shielded flux core welding wire - E71t-1/1m is an all position, flux cored welding wire, which is intended for single and multiplepass welding of low-alloy and carbon steel where a minimum 70ksi tensile strength and good notch toughness is required.

 

Harris 0308LE5 308L Welding Wire Stainless Steel Spool 0030 x 10 lb

Harris 0308LE5 308L Welding Wire, Stainless Steel Spool, 0.030″ x 10 lb.

Harris 0308LE5 308L Welding Wire, Stainless Steel Spool, 0.030″ x 10 lb. - Similar usage as 308, but the. 03% maximum carbon content increases resistance to inter-granular corrosion.

 

Blue Demon E71TGS 035 X 2 Spool Gasless Flux Core Welding Wire

Blue Demon E71TGS .035 X 2# Spool Gasless Flux Core Welding Wire

Blue Demon E71TGS .035 X 2# Spool Gasless Flux Core Welding Wire - E71t-gs is an all-position, single-pass, flux cored welding wire designed to weld carbon steel. The unique quality of this product is that you do not have to use a shielding gas.

 

2 Rolls of E71T-GS 030 035 2-LB Gasless Flux Core Welding Wire Made in USA 2 Rolls of 0030

2 Rolls of E71T-GS .030″ & .035″ 2-LB Gasless Flux Core Welding Wire Made in USA (2 Rolls of 0.030″)

2 Rolls of E71T-GS .030″ & .035″ 2-LB Gasless Flux Core Welding Wire Made in USA (2 Rolls of 0.030″) - Premium quality er316l stainless steel mig welding wire 2-lb spool. Features and applications 003% maximum carbon content to provide resistance against intergranular corrosion and 2-3% molybdenum increases corrosion resistance good bead-wetting characteristics, great puddle control and clean welds with minimal smut use for welding similar alloys containing approximately 2% molybdenum. Available wire diameters 0023″ (06mm), 0030″ (08mm), 0035″ (09mm), 0045″ (12mm). Specification aws a59/asme sfa a59/er316l 2-lb net weight of stainless steel welding wire 4″ spool wrapped in moisture-resistant plastic film typical deposited chemical composition % c=002, cr=185, ni=125, mn=180, mo=250, si=035, p=001, s= 001, remain=fe. Package of one (1-pk), two (2-pk) and five (5-pk) er316l mig welding wire 2-lb spools available us based welding supplier strong technical support with experienced customer service to address buyer’s any question.

 

WeldingCity ER70S-6 ER70S6 Mild Steel MIG Welding Wire 11-Lb Spool 0030 08mm

WeldingCity ER70S-6 ER70S6 Mild Steel MIG Welding Wire 11-Lb Spool 0.030″ (0.8mm)

WeldingCity ER70S-6 ER70S6 Mild Steel MIG Welding Wire 11-Lb Spool 0.030″ (0.8mm) - Premium quality mild steel mig welding wire er70s-6 0030″ 11-lb spool. Specifications aws a518/asme sf a518/er70s-6 11-lb weight of welding wire 8-in spool, 2-in center hole wrapped in moisture-resistant plastic film. Package of one (1) welding wire spool us based welding supplier strong technical support with experienced customer service to address buyer’s any question. Wire diameter 0030″.

 

ER70S-6 - MIG Mild Low Alloy Steel Welding Wire - 11 Lb x 0030 2 SPOOLS

ER70S-6 – MIG Mild & Low Alloy Steel Welding Wire – 11 Lb x 0.030″ (2 SPOOLS)

ER70S-6 – MIG Mild & Low Alloy Steel Welding Wire – 11 Lb x 0.030″ (2 SPOOLS) - 025 0. 002 0. 004 0. 025 typical test result 0. Medium to heavy mill scale base material. Low-spatter thanks to high chemical purity applications structural steel. 15 1. 15 0. 045″ dc+ 75% ar/25% co2 90-110 70-80 16-17 0. 013 0. Er70s-6, wire, mig (gmaw), mild & low alloy steel aws a5. 87 0. 012 general result ni cr mo v cu requirement 0. 077 1. 045″ dc+ 100% co2 220-270 220-250 24-25 0. 06~0. For industry, craft and repair businesses. 045″ dc+ 100% co2 90-110 90-110 19-20 0. 2(n/mm2) a (%) kv2(j)-40 requirement 500 420 22 47 typical test result 555 450 29 77, 95, 83 the above parameters are for reference purpose and depend on diverse factors. 85 0. 035″ dc+ 100% co2 105-115 50-60 17-18 0. 045″ dc+ 75% ar/25% co2 220-270 200-210 21-22 wire composition (%) chemical composition c mn si s p requirement 0. 15 0. 017 0. Run tests, evaluate and set your welding parameters before starting the welding job. 035″ dc+ 100% co2 420-520 220-250 24-25 0. Shipbuilding and repair. 45 0. 03 0. Copper-plated and layer wound. 40~1. 80~1. 18 welding positions all introduction mild steel solid mig wire with manganese and silicon deoxidizers tolerate medium to heavy mill scale surfaces. 125 mechanical properties as welded test item rm(n/mm2) rel/rp0. Ideal for automation and robotic applications welding parameters wire diameter polarity shield gas wire speed (in/min) amperage (amps) voltage 0. 031 0. 50 typical test result 0. 035″ dc+ 75% ar/25% co2 420-520 200-210 23-24 0. 035″ dc+ 75% ar/25% co2 105-115 40-55 16-17 0. 15 0. 15 0.

 

Blue Demon E71T-11 X 035 X 10LB Spool gasless flux core welding wire

Blue Demon E71T-11 X .035 X 10LB Spool gasless flux core welding wire

Blue Demon E71T-11 X .035 X 10LB Spool gasless flux core welding wire - Assembly and maintenance welding, machine parts. Typical applications include butt, lap and fillet welds on steel 16 guage through 1/2″. Operates on straight polarity only (dcen).

 

ER308L 030 035 Mig Stainless Steel Welding Wire 10 lb 25lb Spool 035 25 lb

ER308L .030″ .035″ Mig Stainless Steel Welding Wire 10 lb & 25lb Spool (.035″ 25 lb)

ER308L .030″ .035″ Mig Stainless Steel Welding Wire 10 lb & 25lb Spool (.035″ 25 lb) - You can return a product for up to 14 days from the date you purchased it. If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. Your order will be dispatched within 1 working day of receiving payment (monday-friday) and you should expect to receive it one or two days after dispatch (for orders sent rm 1st class). In the very unlikely event that your item is lost or damaged during post, then we are responsible and will issue either a full refund or replacement. Any product you return must be in the same condition you received it and in the original packaging.

 

WeldingCity 2 Rolls of E71T-GS Flux Core Gasless Mild Steel MIG Welding Wire 0030 08mm 2-lb Spool

WeldingCity 2 Rolls of E71T-GS Flux Core Gasless Mild Steel MIG Welding Wire 0.030″ (0.8mm) 2-lb Spool

WeldingCity 2 Rolls of E71T-GS Flux Core Gasless Mild Steel MIG Welding Wire 0.030″ (0.8mm) 2-lb Spool - Specifications aws a520/asme sf a520/e71t-gs 2-lb weight of welding wire 4-in spool, 5/8-in center hole typical deposited metal chemical composition % c=020, si=032, mn=077, p=0011, s=0002, cr=001, mo=001, ni=001, cu=001, v=0002, remain=fe. Available wire diameters 0030″ (08mm), 0035″ (09mm), 0045″ (12mm). Features self-shielded no welding protection gases needed single-pass fillet and lap welding wrapped in vacuumed aluminum foil. Premium quality flux-cored gasless e71t-gs mild steel mig welding wire 2-lb roll. Package of two (2) e71t-gs welding wire 2-lb spools us based welding supplier strong technical support with experienced customer service to address buyer’s any question.

 

Lincoln Electric ED030584 MIG Welding Wire NR-211-MP035 Spool

Lincoln Electric, ED030584, MIG Welding Wire, NR-211-MP.035, Spool

Lincoln Electric, ED030584, MIG Welding Wire, NR-211-MP.035, Spool - 9 mm (5/16 in. 7 mm (1/2 in. ), Applications with copper back-up, sheet or thin gauge metal, propane cylinders and robotics/hard automation. Tensile strength (psi) 70, plate thicknesses in the range of 7. ) to 12. 0 lb. Spool, min. (In. 035, container 1. Mig welding wire, innershield nr-211-mp , mild steel flux-core, dia. ).

 

Blue Demon 308LFC-O X 035 X 1 Spool stainless steel flux cored gasless welding wire

Blue Demon 308LFC-O X .035 X 1# Spool stainless steel flux cored gasless welding wire

Blue Demon 308LFC-O X .035 X 1# Spool stainless steel flux cored gasless welding wire - The benefit of using this wire is that it does not require a shielding gas. 308lfc-o is the self shielding tubulare version of solid er308l stainless steel wire.

 

INEFIL ER70S-6 035-Inch on 2-Pound Spool Carbon Steel Mig Solid Welding Wire

INEFIL ER70S-6 .035-Inch on 2-Pound Spool Carbon Steel Mig Solid Welding Wire

INEFIL ER70S-6 .035-Inch on 2-Pound Spool Carbon Steel Mig Solid Welding Wire - Made in italy from the finest quality materials using state of the art technology under highly respected labor conditions. Shielding gas is required 80-percent ar+20-percent co2 or 100-percent co2,all positions, single and multi pass welding. Low spatter, high feedability, porosity free, good bead appearance, easy to weld. Mig solid welding wire for carbon and carbon-manganese steels. Approvals abs, tuv, db, dnv, lrs, rina, gl.

 

Hobart H381806-R18 1-Pound ER4043 Aluminum Welding Wire 0030-Inch

Hobart H381806-R18 1-Pound ER4043 Aluminum Welding Wire, 0.030-Inch

Hobart H381806-R18 1-Pound ER4043 Aluminum Welding Wire, 0.030-Inch - It can be used to weld various grades of aluminum. Its bright weld finish makes it a popular choice of welders. A general-purpose type aluminum welding wire.

 

LINCOLN ELECTRIC CO  ED031448 030 NR-211 Lb Spool Inner Shield Flux-Core Welding Wire

LINCOLN ELECTRIC CO ED031448 .030 NR-211, Lb Spool, Inner Shield Flux-Core Welding Wire

LINCOLN ELECTRIC CO ED031448 .030 NR-211, Lb Spool, Inner Shield Flux-Core Welding Wire - 0 lb. ). 7 mm (1/2 in. (In. ) To 12. 030, container 1. Tensile strength (psi) 70, plate thicknesses in the range of 7. ), Applications with copper back-up, sheet or thin gauge metal, propane cylinders and robotics/hard automation. Spool, min. Mig welding wire, inner shield nr-211-mp , mild steel flux-core, dia. 9 mm (5/16 in.

 

WeldingCity ER316L Stainless Steel MIG Welding Wire 2-Lb Spool 0030 08mm

WeldingCity ER316L Stainless Steel MIG Welding Wire 2-Lb Spool 0.030″ (0.8mm)

WeldingCity ER316L Stainless Steel MIG Welding Wire 2-Lb Spool 0.030″ (0.8mm) - Premium quality er316l stainless steel mig welding wire 2-lb spool. Features and applications 003% maximum carbon content to provide resistance against intergranular corrosion and 2-3% molybdenum increases corrosion resistance good bead-wetting characteristics, great puddle control and clean welds with minimal smut use for welding similar alloys containing approximately 2% molybdenum. Available wire diameters 0023″ (06mm), 0030″ (08mm), 0035″ (09mm), 0045″ (12mm). Package of one (1-pk), two (2-pk) and five (5-pk) er316l mig welding wire 2-lb spools available us based welding supplier strong technical support with experienced customer service to address buyer’s any question. Specification aws a59/asme sfa a59/er316l 2-lb net weight of stainless steel welding wire 4″ spool wrapped in moisture-resistant plastic film typical deposited chemical composition % c=002, cr=185, ni=125, mn=180, mo=250, si=035, p=001, s= 001, remain=fe.

 

WeldingCity ER308L Stainless Steel MIG Welding Wire 2-Lb Spool 0035 09mm

WeldingCity ER308L Stainless Steel MIG Welding Wire 2-Lb Spool 0.035″ (0.9mm)

WeldingCity ER308L Stainless Steel MIG Welding Wire 2-Lb Spool 0.035″ (0.9mm) - Specification aws a59/asme sfa a59/er308l 2-lb net weight of stainless steel welding wire 4″ spool wrapped in moisture-resistant plastic film typical deposited chemical composition % c=002, si=032, mn=170, p=001, s=0009, cr=200, ni=10, remain=fe. Available wire diameters 0023″ (06mm), 0030″ (08mm), 0035″ (09mm), 0045″ (12mm). Package of one (1-pk), two (2-pk) and five (5-pk) er308l mig welding wire 2-lb spools available us based welding supplier strong technical support with experienced customer service to address buyer’s any question. Features and applications for mig (gmaw) welding process for 304, 304l, 308, 308l, 321 and 347 stainless steels with a carbon content held to a max of 03% to to reduce the possibility of intergranular carbide precipitation most popular stainless wire for general-purpose applications where corrosion is moderate and applications at cryogenic temperatures shielding gas required, usually argon/co2 mix. Premium quality er308l stainless steel mig welding wire 2-lb spool.

 

2 Rolls ER70S-6 023 030 035 10-LB Spool Mild Steel MIG Welding Wire 2 Rolls of 0035

2 Rolls ER70S-6 .023″ .030″ .035″ 10-LB Spool Mild Steel MIG Welding Wire (2 Rolls of 0.035″)

2 Rolls ER70S-6 .023″ .030″ .035″ 10-LB Spool Mild Steel MIG Welding Wire (2 Rolls of 0.035″) - 030″ 0. 023″ 0. 53 / p 0. 07 / si 0. 045″ x 10 lbs typical chemical composition of wire (%) c 0. S 550 mpa / el 30% / iv at -30 c 70 j. 012 / s 0. S 450 mpa / t. 035″ 0. 18-05 er70s-6 2 spools of 0. 86 / mn 1. 007 typical mechanical properties of all-weld metal y. Aws a5.

 

PGN - ER70S-6 030 08 mm Mild Steel MIG Welding Wire - 33 Lbs Spool

PGN – ER70S-6 .030″ (0.8 mm) Mild Steel MIG Welding Wire – 33 Lbs Spool

PGN – ER70S-6 .030″ (0.8 mm) Mild Steel MIG Welding Wire – 33 Lbs Spool - 003 / cu 0. The roll comes packed in moisture-resistant plastic film. 002 / p 0. 030″ inches (0. 50 / si 0. 08 / mn 1. Deposited chemical composition (wt%) c 0. 012 / v 0. 89 / cr 0. 11. 5″ inch, spool diameter 2″ inch, center hole (hub) diameter 4″ inch, wide spool it can be used in tee welding of carbon steel and low alloy steel in the corresponding strenght grade. 03 mo 0. 02 / ni 0. 013 / s 0. 8mm) weight 33-lbs measurements 10. Er70s-6 mild steel mig welding wire wire diameter.

 

WeldingCity E71T-11 Flux Core Gasless Mild Steel MIG Welding Wire 0035 09mm 10-lb Spool

WeldingCity E71T-11 Flux Core Gasless Mild Steel MIG Welding Wire 0.035″ (0.9mm) 10-lb Spool

WeldingCity E71T-11 Flux Core Gasless Mild Steel MIG Welding Wire 0.035″ (0.9mm) 10-lb Spool - Available wire diameters 0030″, 0035″ and 0045″. Features self-shielded no welding protection gases needed multi-pass fillet and lap welding wrapped in vacuumed aluminum foil. Package of one (1) gasless welding wire spool us based welding supplier strong technical support with experienced customer service to address buyer’s any question. Specifications aws a520/asme sf a520/e71t-11 10-lb weight of welding wire 8-in spool, 2-in center hole. Premium quality flux-cored gasless e71t-11 mild steel mig welding wire 10-lb roll.

 

INEFIL ER70S-6 030-Inch on 2-Pound Spool Carbon Steel Mig Solid Welding Wire

INEFIL ER70S-6 .030-Inch on 2-Pound Spool Carbon Steel Mig Solid Welding Wire

INEFIL ER70S-6 .030-Inch on 2-Pound Spool Carbon Steel Mig Solid Welding Wire - Mig solid welding wire for carbon and carbon-manganese steels. Approvals abs, tuv, db, dnv, lrs, rina, gl. Made in italy from the finest quality materials using state of the art technology under highly respected labor conditions. Low spatter, high feedability, porosity free, good bead appearance, easy to weld. Shielding gas is required 80-percent ar+20-percent co2 or 100-percent co2,all positions, single and multi pass welding.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.