Top 21 T Handles

 

Klein Tools JTH6T25 T25 TORX with Journeyman T-Handle, 6-Inch - Molded-in finger grooves for comfort. Soft touch grips for maximum control and comfort. T-handle design delivers more torque to the fasteners. Part number and hex size appear on the handle for easy, positive identification. Blade length 6-pound hex size t25.

 

Allen 56656G SAE Ball-Plus T-Thru Handle Set, 10-Piece - Dual material t-handle provides superior strength and ultimate comfort for extra torque and safety. Heat treated, tempered alloy steel provides high strength and resistance to rotational distortion. T-thru handle design has a long arm with ball end for access and a standard hex short arm for high torque. Ball-plus hex permits an entry angle up to 25-degree to work in hard-to-reach areas. From allen, the original manufacturer of the hex key.

 

Performance Tool W1712 Metric T-Handle Hex Key Set, 7-Piece - Color coded sae, metric or star. Two drive ends long for hard to reach areas, short end for extra torque. Single piece construction runs through handle for greater strength. Comfortable, non-slip molded grips. Chrome plated shafts.

 

Metric- 10 Pc T-Handle Hex Key Wrench Set - 5mm,3mm,4mm,4. Pc t-handle allen wrenches, hex keys set, metric heat treated chrome vanadium steel, black oxide finish. T-handle design increases turning power and provides a sure comfortable grip. 10 heat treated chrome vanadium steel, black oxide finish. Sizes2mm,2. Free standing steel organizer stand. 5mm,6mm,8mm,10mm wrench length is 5 1/2″ to 6″. 5mm,5mm,5. Contoured plastic t-handles.

 

Bondhus 15268 6mm Hex Tip T-Handle with ProGuard Finish - Has ergonomic handle design and flywheel effect which saves time. Hex tip t-handle with proguard finish with solid steel handles. Handle coating extends along blade.

 

Felo 0715732350 1/4-Inch T-handle Hex Bit Holder, 5-Inch long, 338 Series - Strong, durable core for maximum torque and hanging hole for easy storage or inserting lever. Bit holders holds 1/4″ bits. 2-component handle for added comfort, ergonomically refined soft-grip coating. Upc code on each product. Lifetime warranty, we will replace it free of charge.

 

Craftsman Mach Series 3/8″ T-Handle Driver & 14pc Bit Set - T-handle driver. Adjust and tighten to size by twisting knurled nut. T-handle can be extended in either direction for more leverage. Additional holding jaws are recessed inside the hole for gripping onto smaller sized taps.

 

Bondhus 15307 1/8″ Hex Tip T-Handle with ProGuard Finish - Has ergonomic handle design and flywheel effect which saves time. Hex tip t-handle with proguard finish with solid steel handles. Handle coating extends along blade.

 

Neiko 01135A 3/8″ Drive T Handle Wrench, Chromium Vanadium Steel | Long Reach | Includes 1/4″ and 1/2” Adaptors - Made of high strength chromium-vanadium steel and stands up to even the toughest bolts and fasteners. T handle wrench is designed for added torque and durability and allows user to fully utilize strength to loosen tough fasteners. Accepts 3/8-inch socket drives to handle multiple job applications and uses drive attachments for sockets, swivels, hex drives, etc. Measures 7″ wide x 11″ long, this wrench easily reaches into narrow spaces to position into sockets. Includes internal 1/4-inch drive and external ½-inch drive, allowing user to use t-handle with different sockets.

 

Bondhus 15305 3/32″ Hex Tip T-Handle with ProGuard Finish - Hex tip t-handle with proguard finish with solid steel handles. Has ergonomic handle design and flywheel effect which saves time. Handle coating extends along blade.

 

10pc Metric Professional Long T-Handle Hex Key Wrench Set – 2mm to 10mm – Soft-Grip - Hardened and tempered tool steel resists twisting and cam-out also available in sae/standard. Easy-to-grip t-handle design allows for maximum torque application for stubborn hex bolts. 9 in length for deep-set screws/bolts, reach through obstructions, great for bikes, motorcycles. 10 most-used metric sizes includes sizes 2mm, 25mm, 3mm, 4mm, 45mm, 5mm, 55mm, 6mm, 8mm, and 10mm clear-view vinyl storage pouch. Comfortable insulating soft pvc grip provides non-slip hold even when wet, size-marked.

 

Klein Tools JTH4E11 3/16-Inch Hex Key with Journeyman T-Handle - Blade length 4-inch. The klein jth4e11 3/16-inch hex journeyman t-handle features a t-handle design that delivers more torque to the fasteners. Treated steel for rust and corrosion resistance. Other features include molded-in finger grooves for comfort. Soft touch grips for maximum control and comfort. Safety information always wear approved eye protection. The part number and hex size appear on the handle for positive identification. Hex size 3/16-inch. Not insulated, will not protect against electrical shock. Color-coded handles blue for metric, black for inch.

 

Motion Pro 08-0114 T-Handle Rack - 11 slots. Keeps t-handle accessible and ready for action. Easily hangs on the side of most tool boxes.

 

Bondhus 13307 1/8″ Hex Tip Graduated Length T-Handle with ProGuard Finish, 4.6″, 2 Piece - Bondhus professional quality tools provide superior value and offer a lifetime warranty. Has ergonomic handle design and flywheel effect which saves time. Hex tip graduated length t-handle with proguard finish with solid steel handles. Handle coating extends along blade.

 

Klein Tools JTH6M25 2.5mm Hex Key with Journeyman T-Handle 6-Inch - Soft touch grips for maximum control and comfort. Molded-in finger grooves for comfort. Blade length 6-pound hex size 25mm. Part number and hex size appear on the handle for easy, positive identification. T-handle design delivers more torque to the fasteners.

 

Bondhus 15389 Set of 8 Hex T-handles with Stand, 9-Inch Length, sizes 2-10mm - Proguard finish is 5 times more effective than the next leading brand in preventing rust, protecting your investment over time. Lifetime warranty, we will replace it free of charge. Cushion grip t-handle is ergonomically shaped to reduce pressure points during continuous use. Tools are made in the usa with bondhus proprietary protanium® steel and are up to 20% stronger than competitor tools. Hex sizes 2, 25, 3, 4, 5, 6, 8, and 10mm with a stand.

 

Bondhus 13189 Set of 8 Balldriver and Hex T-handles with Stand, sizes 2-10mm - Proguard finish is 5 times more effective than the next leading brand in preventing rust, protecting your investment over time. Lifetime warranty, we will replace it free of charge. Cushion grip t-handle is ergonomically shaped to reduce pressure points during continuous use. Tools are made in the usa with bondhus proprietary protanium® steel and are up to 20% stronger than competitor tools. Sizes 2mm hex, 25mm hex, 3mm hex, 4mm ballpoint, 5mm ballpoint, 6mm ballpoint, 8mm ballpoint, and 10mm ballpoint with a stand.

 

Bondhus 13389 Set of 8 Hex T-handles with Stand, sizes 2-10mm - Proguard finish is 5 times more effective than the next leading brand in preventing rust, protecting your investment over time. Lifetime warranty, we will replace it free of charge. Cushion grip t-handle is ergonomically shaped to reduce pressure points during continuous use. Tools are made in the usa with bondhus proprietary protanium® steel and are up to 20% stronger than competitor tools. Hex sizes 2, 25, 3, 4, 5, 6, 8, and 10mm with a stand.

 

Bondhus 15248 Set of 6 Hex T-handles, 6-Inch Length, sizes 2-6mm - Proguard finish is 5 times more effective than the next leading brand in preventing rust, protecting your investment over time. Tools are made in the usa with bondhus proprietary protanium® steel and are up to 20% stronger than competitor tools. Cushion grip t-handle is ergonomically shaped to reduce pressure points during continuous use. Hex sizes 2, 25, 3, 4, 5, and 6mm. Lifetime warranty, we will replace it free of charge.

 

ATD Tools (574) 10-Piece SAE T-Handle Hex Key Set - The set includes (1) 3/32, (1) 7/64, (1) 1/8, (1) 9/64, (1) 5/32, (1) 3/16, (1) 7/32, (1) 1/4, (1) 5/16 and (1) 3/8. The shafts are made from high quality steel. 10 piece sae t-handle hex key set features plastic handle grips for comfort and increased turning power.

 

Eklind Power-T T-Handle Ball-Hex Key - Meets or exceeds all applicable standards and regulations set forth in ansi, asme, rohs, reach, ca prop 65 and dodd-frank conflict minerals legislation. Eklind ball-hex keys will drive a fastener at up to a 30 degree angle eklind t-handle hex keys provide extra reach and extra leverage. Made with eklind alloy steel heat treated for optimum strength and ductility finished with eklind black finish to resist rust. Made in usa high quality, industrial grade, professional tools. Eklind power-t t-handle hex keys have a soft, textured over mold for extra comfort, slip resistance and safety identification is permanently molded in the handle color coded red for inch.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.