Lisle 40490 Red Pliers/Wrench Rack
- See 40460 for black. There are two different size of slots to accommodate all sizes of tools. Organize your tool box drawer. The front edge also has indentions to hold tools upright. Pliers/wrench rack is constructed out of plastic and will hold up to 13 tools.
Protoco 4030 Wrench Rack, Reverse Yellow, 15-Piece
- Made from high density plastic material for durability, impact resistance and longevity. Easily mounted on the wall and it is made in the usa. Fits either sae or metric wrenches and holds wrenches from ¼” to 1-1/4″ and 6 mm to 30 mm. Holds a 1″ combination wrench in a drawer with a height of 2″. Superior design fits most wrenches (wrench sizes fitting wrench rack will vary from manufacturer to manufacturer).
SK Hand Tool 1072 Wrench Rack, Green, 11-Piece
- Holds wrenches in place through a unique, friction-fit design for safe, secure storage. Sk wrench racks can be wall mounted or used in a drawer. Made in the usa.
Plier/wrench Rack Storage & Organizer
- 155″ x 625″ x 2″. Tools stay in place when drawer is shut. 155″ in length. Holds 15 pliers, vinal insulated, this product must ship to physical address, no po box. Fits in a drawer only 2 1/2 deep.
Protoco 5171 Stubby Wrench Rack, Blue Magnetic, 10-Piece
- Fits either sae or metric wrenches and holds wrenches from ¼” to 9/16″ and 6 mm to 13 mm. Superior design fits most wrenches (wrench sizes fitting wrench rack will vary from manufacturer to manufacturer). Easily mounted on the wall and it is made in the usa. Made from high density plastic material for durability, impact resistance and longevity. Easy to store or remove wrenches from locking wrench rack.
Wrench Rack – Formed Aluminum (Small 2 Pack)
- Experience our true 100-tooth ratcheting wrenches in the tightest of spaces with just 36 degrees of swing arc, they will make your job a whole lot easier our true single-pawl 100-tooth ratchet gear is achievable only through expert engineering and precise craftsmanship its unparalleled smooth ratcheting mechanism makes it a joy to use all of these components are engineered to fit in a slim profile to make these the go-to wrench for pros. Open end features 6-point anti-slip groove that grips on the bolt and prevents slippage while you work the open end is tipped at a 15-degree angle useful especially in tight spots, after each 15-degree turn, flip the wrench over to quickly engage the fastener again. Comes with one left and one right (for metric and sae). Flawless smartkrome plating, achieved by thorough polishing and careful application of chrome protective plating, ensures durability and corrosion resistance. Set completes with a convenient wrench rack, sizes 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in.
SK Hand Tool 1073 Wrench Rack, Green, 13-Piece
- Sk wrench racks can be wall mounted or used in a drawer. Holds wrenches in place through a unique, friction-fit design for safe, secure storage. Made in the usa.
SK Hand Tool 1086G SureGrip 7 Slot Short Wrench Rack, Green
- Holds wrenches in place through a unique, friction-fit design for safe, secure storage. Made in the usa. Sk wrench racks can be wall mounted or used in a drawer.
Protoco 3040 Wrench Rack, Green, 15-Piece
- Superior design fits most wrenches (wrench sizes fitting wrench rack will vary from manufacturer to manufacturer). Fits either sae or metric wrenches and holds wrenches from ¼” to 1-1/4″ and 6 mm to 30 mm. Easily mounted on the wall and it is made in the usa. Holds a 1″ combination wrench in a drawer with a height of 2″. Made from high density plastic material for durability, impact resistance and longevity.
Hansen 1/4 3/8 1/2” 9pc Socket Tray Wrench Rack Organizer Set Metric SAE USA
- New with retail packaging/upc tags made in usa support quality american manufacturing, det. Superior design fits most wrenches (wrench sizes fitting wrench rack will vary from manufacturer to manufacturer). Easily mounted on the wall and it is made in the usa. Easy to store or remove wrenches from locking wrench rack. Made from high density plastic material for durability, impact resistance and longevity.
Hansen Global 3500 Reversed Universal Wrench Rack
- Reversed rack stores smaller wrenches toward the top of the rack. Tough polypropylene rack holds 13 wrenches firmly with its gripping system and comes with two sets of peel-off numbers one in metric sizes 6mm-20mm and the other in sae sizes 1/8″ through 1″. Shows at a glance when a wrench is missing and offers instant selection of the right size wrench. Spring tabs can also be trimmed to custom fit extra thick wrenches. Wrench racks can be customized by combining metric ans sae sizes.
Capri Tools Ratcheting Wrench Set, True 100-Tooth, 3.6-Degree Swing Arc, 1/4 to 1 in., SAE, 13-Piece in a Convenient Wrench Rack
- Set completes with a convenient wrench rack, sizes 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in. Flawless smartkrome plating, achieved by thorough polishing and careful application of chrome protective plating, ensures durability and corrosion resistance. Experience our true 100-tooth ratcheting wrenches in the tightest of spaces with just 36 degrees of swing arc, they will make your job a whole lot easier our true single-pawl 100-tooth ratchet gear is achievable only through expert engineering and precise craftsmanship its unparalleled smooth ratcheting mechanism makes it a joy to use all of these components are engineered to fit in a slim profile to make these the go-to wrench for pros. 12-point wavedrive box end transfers torque uniformly and prevents damaging and rounding of the bolt 0 degree offset on the box end gives you maximum clearance integrated steel color ring makes it easy to identify between sae (red) and metric (blue) sizes. Open end features 6-point anti-slip groove that grips on the bolt and prevents slippage while you work the open end is tipped at a 15-degree angle useful especially in tight spots, after each 15-degree turn, flip the wrench over to quickly engage the fastener again.
16 Slot Wrench Rack for open end, box or combo wrenches
- Organize your workbench and toolbox with this 16 slot wrench rack. The wrench rack features molded springs that lock your wrenches in place to keep them safe and at the ready. The wrench rack can hold open end, box or combo wrenches and is easily mounted to the wall or small enough to fit in your toolbox weight 0. 43 lb.
Protoco 3021 Wrench Rack, Red Magnetic, 15-Piece
- Holds a 1″ combination wrench in a drawer with a height of 2″. Easily mounted on the wall and it is made in the usa. Made from high density plastic material for durability, impact resistance and longevity. Superior design fits most wrenches (wrench sizes fitting wrench rack will vary from manufacturer to manufacturer). Fits either sae or metric wrenches and holds wrenches from ¼” to 1-1/4″ and 6 mm to 30 mm.
Protoco 1040 Wrench Rack, Green, 12-Piece
- Easily mounted on the wall and it is made in the usa. Superior design fits most wrenches (wrench sizes fitting wrench rack will vary from manufacturer to manufacturer). Fits either sae or metric wrenches and holds wrenches from ¼” to 1″ and 6 mm to 24 mm. Holds a 1″ combination wrench in a drawer with a height of 2″. Made from high density plastic material for durability, impact resistance and longevity.
Protoco 3070 Wrench Rack, Blue, 15-Piece
- Fits either sae or metric wrenches and holds wrenches from ¼” to 1-1/4″ and 6 mm to 30 mm. Made from high density plastic material for durability, impact resistance and longevity. Easily mounted on the wall and it is made in the usa. Holds a 1″ combination wrench in a drawer with a height of 2″. Superior design fits most wrenches (wrench sizes fitting wrench rack will vary from manufacturer to manufacturer).
Protoco 5021 Stubby Wrench Rack, Red Magnetic, 7-Piece
- Superior design fits most wrenches (wrench sizes fitting wrench rack will vary from manufacturer to manufacturer). Made from high density plastic material for durability, impact resistance and longevity. Easily mounted on the wall and it is made in the usa. Fits either sae or metric wrenches and holds wrenches from ¼” to 9/16″ and 6 mm to 13 mm. Easy to store or remove wrenches from locking wrench rack.
Protoco 4070 Wrench Rack, Reverse Blue, 15-Piece
- Superior design fits most wrenches (wrench sizes fitting wrench rack will vary from manufacturer to manufacturer). Made from high density plastic material for durability, impact resistance and longevity. Easily mounted on the wall and it is made in the usa. Fits either sae or metric wrenches and holds wrenches from ¼” to 1-1/4″ and 6 mm to 30 mm. Holds a 1″ combination wrench in a drawer with a height of 2″.
Wrench rack by Hall Designs | 10 slot, steel, black. Made in USA
- Laser cut steel, matte black powder coat finish. Designed with a narrower overall width for short handle wrenches. Drawer depth of 1-1/2″ required with a 3/4″ or 19mm wrench. 10 slots for short handle wrenches.
Protoco 5121 Stubby Wrench Rack, Red Magnetic, 10-Piece
- Fits either sae or metric wrenches and holds wrenches from ¼” to 9/16″ and 6 mm to 13 mm. Superior design fits most wrenches (wrench sizes fitting wrench rack will vary from manufacturer to manufacturer). Made from high density plastic material for durability, impact resistance and longevity. Easily mounted on the wall and it is made in the usa. Easy to store or remove wrenches from locking wrench rack.
Protoco 5141 Stubby Wrench Rack, Green Magnetic, 10-Piece
- Made from high density plastic material for durability, impact resistance and longevity. Easily mounted on the wall and it is made in the usa. Easy to store or remove wrenches from locking wrench rack. Fits either sae or metric wrenches and holds wrenches from ¼” to 9/16″ and 6 mm to 13 mm. Superior design fits most wrenches (wrench sizes fitting wrench rack will vary from manufacturer to manufacturer).
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
