Vulcan G-51 Aluminum Brazing Rods (1/2 LB) and Flux (4 oz)
- For use with a torch on all known weldable and brazable aluminums. Melting of the base metal is not necessary. Flux indicates temperature as it goes from powder to paste to liquid with increased temperature. Deposits have good color match to aluminum, high strength, and good electrical conductivity. Flux thoroughly cleans, quickly melts, and easily spreads the filler metal.
Aufhauser SilverAlloy 45% Ag BAg-5 18″ Flux Coated Silver Brazing Rods 3 Sticks
- Meets aws a58 bag-5. Made in usa by aufhauser corp. Fluxed coated cadmium-free 45% silver brazing rodsfluxed coated 56% silver brazing rods, 1/16″ core (3 sticks). For general purpose brazing of ferrous and non-ferrous alloys excluding aluminum. For joining and repairing of copper, brass, steel, stainless steel and cast iron.
1lbs Wolverine Silver Brazing Rods 5 % Silvaloy 28 Sticks
- Solder 5% silver tube of 28 sticks-used to braze copper refrigerant lines. 65,000 psi tensile strength melting point 1,600-degree f (871-degree c) aws a57, rbcuzn-c. Diameter 1/8-inch. Length 36-inch. Great for the farm, ranch, auto body, construction and plumbing.
Lincoln Electric KH512 Bronze Flux-Coated Brazing Rod, 1/8″ x 36″ (Pack of 3)
- 1/8″ x 36″ bronze flux-coated brazing rod. Excellent for brazing automobiles, pipes, tanks, etc. Tins easily and has high strength and wear resistance. A low fuming rod of the highest quality. Fuses well with cast iron, malleable, galvanized iron, steel, brass, copper and metal.
RBCuZn-C – LFB Flux Coated Bronze Brazing Rod – 39″ x 1/16″ (5 Lb)
- 1mm. The optimum joint gap is 0. 025-0. Rbcuzn-c, lfb bare bronze brazing rod are copper -zinc brazing alloys suitable for gas-flame brazing,high temperature drazing of copper and copper alloys,nickel,cast iron and hard alloys. During oxy-acetylene brazing,to heat with oxidized flame quickly can lessen evaporation of zinc and prevent porosity from over -oxidization. Flux is also necessary to obtain good brazing seam.
Blue Demon BCuP-5 X 1/8″ X .050″ X 1 Pound tube (15% Silver) silver phos copper brazing rod
- Developed primarily for use on copper, this alloy may also be used on other nonferrous copper base alloys. Containing approximately 15% silver, this product has long been the standard in the refrigeration industry. This product is used extensively on refrigeration units, air conditioning apparatus, electrical conductors.
Forney 48302 Bare Brass Gas Brazing Rod, 3/32-Inch-by-36-Inch, 6-Rods
- Includes aluminum magnesium. Easy flow brazing rod makes it simple to braze aluminum and zinc based metals with an oxygen acetylene or propane torch set up. Melting point is 732-degree fahrenheit (389-degree celsius). No flux is required. Great for repairs on irrigation pipes, carburetor bowls, aluminum boats, camper covers, lawn mower housings and casings.
Forney 42330 Copper Coated Brazing Rod, 1/16-Inch-by-36-Inch, 5-Pounds
- Used in applications require high tensile strength, greater than 45,000 psi. 2,700 degree (1,482 c degree) melting point. High silicon and manganese content eliminates the need for flux. High strength alloy used for gas brazing low carbon and low alloy steels. Typical applications include low carbon and low alloy steels and sheets.
RBCuZn-C – LFB Flux Coated Bronze Brazing Rod – 39″ x 3/32″ (10 Lb)
- During oxy-acetylene brazing,to heat with oxidized flame quickly can lessen evaporation of zinc and prevent porosity from over -oxidization. 025-0. 1mm. Flux is also necessary to obtain good brazing seam. Rbcuzn-c, lfb bare bronze brazing rod are copper -zinc brazing alloys suitable for gas-flame brazing,high temperature drazing of copper and copper alloys,nickel,cast iron and hard alloys. The optimum joint gap is 0.
Hot Max 22068 3/32-Inch by 18-Inch Flux Coated Brazing Rod
- Melting point 1,600-degree f (871-degree c). 65,000 psi tensile strength. Flux coated bronze brazing rods are excellent quality, easy flowing, low fuming brazing rod for nearly all your brazing needs.
10pcs 3.2x450mm Aluminum Alloy Welding Brazing Rods Tools for Cracks Polish Paint
- High thermal conductivity and electrical conductivity. Aluminum alloy rods, excellent corrosion resistance. Applications include truck beds, loading ramps, docks, diamond plate, irrigation piping, engine blocks, transmission housing, etc. Minimize parent material distortion during welding. Widely used in chemical industry aluminum equipment.
RBCuZn-C – LFB Bare Bronze Brazing Rod – 36″ x 3/32″ (2 Lb)
- 1mm. Flux is also necessary to obtain good brazing seam. Rbcuzn-c, lfb bare bronze brazing rod are copper -zinc brazing alloys suitable for gas-flame brazing,high temperature drazing of copper and copper alloys,nickel,cast iron and hard alloys. 025-0. The optimum joint gap is 0. During oxy-acetylene brazing,to heat with oxidized flame quickly can lessen evaporation of zinc and prevent porosity from over -oxidization.
BCuP-2 PhosCopper Brazing Rod 0% Silver – Flat – 1/8″ x 0.05″ x 20″ (2 Lb / 56 Sticks)
- Very fluid, medium temperature brazing alloy. 2% phosphorus and balance copper. This brazing rod has 0% silver, 7. Phosphorus acts as a fluxing agent when joining copper to copper. When joining brass a proper brazing flux must be used. Solid temperature 1310°f, 710°c, liquid temperature 1460°f, 793°c, recommended brazing range 1350-1550°f, 730-845°c, meets aws bcup-2.
Hobart 770205 Brazing Rod,1/8-Inch by 17-1/2-Inch, Flat,Quantity-10, Bare Bronze
- ) 1/8, compatible with copper and bronze, rods (qty) 10, welding rod type uncoated bare bronze flat brazing rods, wire material uncoated bare bronze. Preheating is recommended for some applications. Product type welding rod, rod size (in. Hobart uncoated bare bronze flat brazing rods consist of high-strength, self-fluxing alloy for copper-to-copper (without flux) and copper-to-bronze with 5130 flux.
Forney 48504 Flux Coated Bronze Brazing Rod, 1/8-Inch-by-36-Inch, 4-Pounds
- Tensile strength is 65,000 psi. Founded in 1932, forney offers more than 5,000 products for the hardware, automotive, farm and ranch and do-it-yourself markets. Formulated for high tensile strength and ductility. Flux coated for best cleaning action. 81 kg) per tube. 4-pound (1. If you’ve got metal working questions, we’ve got answers. Fluxed low fuming bronze brazing rod is high quality low fuming bronze brazing rod with flux. Proof of purchase required. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended. Smooth flowing. 1/8-inch (3. 44mm) rods. Claims for warranty must be made within 90 days of the date of purchase. Excellent for most brazing uses. Melting point 1,598⁰ f (870⁰ c). We’re committed to your success regardless of location size or needs. Forney industries is one of america’s longest operating family-owned metal working product companies. 18mm) by 36-inch (91. Yellow color coded.
10pcs 230x2mm Low Temperature Aluminum Repair Welding Brazing Soldering Rods
- Can be used to any heat source, such as propane, butane, mapp, or an oxy-acetylene torch. Joins all aluminum alloys, including those that are not easily joined by high-temperature brazing. Low temperature, between 717 and 737 degrees working temperature, over 500 degrees below melt point of aluminum. Can be used to gas welding with solder powder, can also be used for argon arc welding. Made of high quality aluminum alloy, not rust, stronger than the base metal, up to 45,900 psi.
Hot Max 24003 1/8-Inch by 36-Inch Mild Steel Brazing Rod, 1#
- Diameter 1/8-inch. Length 36-inch. Comes with a variety of tips. Aws a52 class r47. General purpose copper coated mild steel brazing rod for all low carbon steels.
Lincoln Electric KH481 Brazing Rods, Flux Coated, 3/32″ x 14″, 12 Piece
- Fuses well with cast iron, malleable, galvanized iron, steel, brass, copper, and metal. Tins easily and has high strength and wear resistance. A low fuming rod of highest quality. Excellent for brazing automobiles, pipes, tanks, etc. A high quality brazing already applied to speed up brazing time.
Forney 48300 Bare Brass Gas Brazing Rod, 3/32-Inch-by-18-Inch, 10-Rods
- Flux is required. Easy flow brazing rod makes it simple to braze aluminum and zinc based metals with an oxygen acetylene or propane torch set up. Great for repairs on irrigation pipes, carburetor bowls, aluminum boats, camper covers, lawn mower housings and casings. Balanced zinc and copper alloy. Melting point is 1620 degrees fahrenheit.
Brazing Rods Stay-Silv 15 .050 in. x 1/8 in. x 20 in. 15 Silver Pack of 28
- ). 006 silver (%) 15. ) 20 solidus temperature (f) 1190 liquidus temperature (f) 1480 fluidity rating 3. 0 recommended joint clearance (in. 0 phosphorous (%) 5. ) 1/8 rod length (in. 28 pack of j w harris 61035. 050 rod width (in. Rod shape flat rod thickness (in. 002, 0. ) 0. 0 copper (%) 80.
Forney 42340 Copper Coated Brazing Rod, 1/8-Inch, 5-Pound
- Typical applications include low carbon and low alloy steels and sheets. Used in applications require high tensile strength, greater than 45,000 psi. High strength alloy used for gas brazing low carbon and low alloy steels. High silicon and manganese content eliminates the need for flux. 2,700-degree (1,482 c degree) melting point.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
