Stanley Proto J385L Convertible Retaining Ring Pliers – 7-1/4-inch
- Pliers have a return spring designed to reduce fatigue and facilitate operation. Pliers have air cushioned grips which spreads loads across the hand increasing comfort. Design permits quick change-over to work internal or external rings. Ring range external (shaft) 1/4-inch- 2-inch internal (bore) 3/8-inch- 2-inch. Pliers have no screws to tighten.
SK 7612 12 Piece Utility Grade .038-Inch, .047-Inch, .070-Inch and .090-Inch Straight 45 Degree and 90 Degree Convertible Retaining Ring Plier Set
- Manufacturer’s lifetime warranty. 12-piece convertible retaining ring pliers designed for maximum convenience. Variety of tip sizes included. Includes 12 pliers. Each pliers pair converts easily between internal and external rings.
Knipex 4421J31 Internal Angled Retaining Ring Pliers 8.5-Inch
- Tips are forged inward to prevent retaining rings from slipping off and are used for installing & removing internal rings on the inside bore holes. For easy fitting of internal snap rings. Forged from chrome vanadium electric steel and designed to minimize tip breakage, and offer extended tool life. For rings 40, 100 mm in diameter. Plastic coated handles.
Knipex 4411J4 Internal Straight Retaining Ring Pliers 12.75-Inch
- Forged from chrome vanadium electric steel and designed to minimize tip breakage, and offer extended tool life. Plastic coated handles. For rings of 85, 140 mm in diameter. Tips are forged inward to prevent retaining rings from slipping off and are used for installing & removing internal rings on the inside bore holes. For easy fitting of internal snap rings.
Urrea 377 Convertible Retaining Ring Pliers
- Item has a rubber grip. These pliers are especially designed to install or remove heavy-duty basic and inverted retaining rings. Rubber grip. These pliers are especially designed to install or remove heavy-duty basic and inverted retaining rings. Convertible retaining ring pliers.
Craftsman Professional Retaining Ring Pliers, Internal/External, 9-47412
- (0. 2mm) bent 90 degrees. Tip sizes included 0. 036 in. Kit includes five pairs of durable alloy, color-coded, interchangeable tips, straight and 90 degree, and a hex key wrench all stored in a handy pouch. 6mm), 0. In diameter. (0. (0. 047 in. (8mm, 26mm) internal, and 1/8 in. Convertible internal and external pliers for use on rings up to 1 in. 047 in. 023 in. (1. The double-dipped custom grips are made of low-temperature, high-impact material for durability and comfort. 2mm) straight, and 0. Handles are nickel-chrome plated for lasting appearance and protection from rust and corrosion. To convert pliers between internal and external applications, simply flip the switch and squeeze the handles., 1 in. (1. Applicable ring range size 1/4 in. 9mm), 0., 1 in. (3mm, 26mm) external. 9mm), 0. 036 in. The plier includes an adjustable stop for keeping the jaw opening set during repetitive work processes.
4-in-1 Snap Ring Circlip E-Clip Retaining Ring Pliers Set – Soft Grip
- One handy tool that covers six different snap ring applications. Auto-lock center pin keeps heads secure, easy to remove for instant head swaps 11 to 13mm pins. Non-slip pvc cushion grip, spring-assist open helps get right width to insert pins 6″ length. Drop-forged hardened steel ensures long service life corrosion resistant black oxide finish.
OTC Tools 222029 45 Degree Replacement Tip for Straight Tip Retaining Ring Pliers
- The otc 222029 is a pair of replacement 45 degree tips for the otc 7300 internal and 7301 external straight tip retaining ring pliers.
Channellock – 10″ RETAINING RING PLIERS
- 090,. 090,. 108,. Features and benefits accomodates up to 4″ rings converts from internal to external with a flip of a switch ratchet automatically locks for easy operation includes 6 pair of color coded interchangeable tip includes the following tips. 108,. 120 90. 120 15″ and.
Knipex 4521200 Special Rings Retaining Ring Pliers 8-Inch
- For retaining rings from 120 mm in diameter for securing the drive shaft in the gearbox of a motor vehicle. Plastic coated handles. Angled jaws with centering hole. Minimum ring split gap of the rings 22 mm. High-grade special tool steel, forged, oil-hardened.
Knipex 4821J31 Internal Angled Precision Retaining Ring Pliers 8.5-Inch
- Sturdy, inserted tips made from high density drawn spring wire. Large contact faces on the tips no distortion of circlips, easy fitting. Plastic coated handles. Forged from chrome vanadium electric steel and designed to minimize tip breakage, and offer extended tool life. For rings 40, 100 mm in diameter.
Knipex 4921A11 External Angled Precision Retaining Ring Pliers 5.2-Inch
- For rings 10, 25 mm in diameter. Large contact faces on the tips no distortion of circlips, easy fitting. Forged from chrome vanadium electric steel and designed to minimize tip breakage, and offer extended tool life. Sturdy, inserted tips made from high density drawn spring wire. Plastic coated handles.
Knipex 4611A2 External Straight Retaining Ring Pliers 7.25-Inch
- Plastic coated handles. Forged from chrome vanadium electric steel and designed to minimize tip breakage, and offer extended tool life. Tips are forged outward and are used for installing rings on the outside of a shaft or groove. For rings 19, 60 mm in diameter. For easy fitting of external circlips.
Craftsman 9-47385 Quarter-Turn & Reg Convertible Retaining Ring Pliers Set (2 Piece)
- The craftsman 9-47385 2 pc. Quarter-turn & reg convertible retaining ring pliers set has comfort grips.
Knipex 4410J6 Internal Straight Retaining Ring Pliers 22.5-Inch
- For easy fitting of internal snap rings. Black powder coated. Forged from chrome vanadium electric steel and designed to minimize tip breakage, and offer extended tool life. Tips are forged inward to prevent retaining rings from slipping off and are used for installing & removing internal rings on the inside bore holes. For rings of of 252, 400 mm in diameter.
Knipex 4421J41 Internal Angled Retaining Ring Pliers 12-Inch
- For rings 85, 140 mm in diameter. Tips are forged inward to prevent retaining rings from slipping off and are used for installing & removing internal rings on the inside bore holes. Plastic coated handles. For easy fitting of internal snap rings. Forged from chrome vanadium electric steel and designed to minimize tip breakage, and offer extended tool life.
Urrea 250G Specialty Retaining Ring Pliers
- Spring loaded handle flat tip. Designed with external jaws and cushion grip system for more power designed with external jaws and cushion grip system for more power. Item is 8-3/4-inch long.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
