Icstation 12V 30A 3S Lithium Battery Protection PCB BMS Board for 18650 18550 Li-ion Lipo Battery Pack (Pack of 2)
- Pcb size 56 x 45 x 35mm/220 x 177 x 014inch(lwh). Ship out by usps with tracking information and 7-17 days delivery time usually. Overcharge protection voltage 42v±0025v, over-discharge protection voltage 29v±01v. Maximum continuous working current 30a, maximum charging current 10a. 12v 30a 3 cell li-ion battery charge discharge protection board with japan battery control ic.
Icstation 12V 30A 3S Lithium Battery Protection PCB BMS Board for 18650 18550 Li-ion Lipo Battery Cell Pack
- Ship out by usps with tracking information and 7-17 days delivery time usually. 12v 30a 3 cell li-ion battery charge discharge protection board with japan battery control ic. Maximum continuous working current 30a, maximum charging current 10a. Pcb size 56 x 45 x 35mm/220 x 177 x 014inch(lwh). Overcharge protection voltage 42v±0025v, over-discharge protection voltage 29v±01v.
CTEK (56-926) LITHIUM US 12 Volt Fully Automatic Lithium Ion Phosphate Battery Charger
- Unique 8 step charging system with a patented program that tests battery condition and, charges and maintains to ensure maximum battery life and performance. Numerous accessories simplifies using the same charger for multiple battery applications. Water and dust resistant means it is safe to use in all climate situations. No sparks, short-circuit proof and reverse polarity protected makes it safe for all the vehicles electronics and easy to use. Connect and forget, no need to disconnect battery from the vehicle when charging.
5S 15A BMS Protection PCB Board For 5 Packs 18650 Li-ion Lithium Battery Cell
- Charging voltage 21 v charge mos pressure value 35 v discharge mos pressure value 35 v. Continuous discharge current 15 a over current protection 50/55/60 a over current protection delay 20/25/30ms. Single section over discharge detection voltage 275-285 v over discharge recovery voltage 290-320 v over discharge detection delay 05-20s. Single section over charge detection voltage 418- /422v over charge recovery voltage 405- 415 v over charge detection delay 05/10/20s. Short / over / over current protection recovery short circuit / over discharge / over current protection after removal of load auto recovery.
Li-ion Lithium Cell Protection, 10S 36V 40A 18650 Lithium Battery Protection BMS PCB Board Balance
- Operating current ≤300ua. Over charge voltage test vcu 425v ±005v (420-435v // each 005v per step). Over discharge voltage resume vdu 280v ±0v1. Over charge voltage resume vcd 410-400v. Over discharge voltage test vdd250v ±01v (25-30v // each 005v per step).
2 PACK PowerAll ELEMENT 400A PBJS12000E 12,000 mAh Water Resistant Outdoor Durable Lithium Battery Car Jump Starter, Power Bank and LED Flashlight
- The power bank, with 12,000 mah and 2 usb ports, users can power multiple mobile devices including your cell phone, tablet, mp3 players and more. The powerall advantage, in addition the robust quality inspection process that powerall has put in place for their products, each unit is backed by a 1 year manufacturer warranty have peace of mind knowing that powerall will. Built for your adventures, aluminum construction and built to resist against, water, dust and sand so you can take it on your adventures. The led flashlight, the deluxe is equipped with a built in led flashlight that lasts up 120 hours with 3 different illumination modes. He jump starter, the powerall deluxe has a capacity of 400 amp which is capable of jump starting a v8 car.
Icstation TP4056 Mini USB 5V 1A 18650 Lithium Battery Charger Board with Over Charge Discharge Protection (Pack of 5)
- Input voltage dc5v,charging cut-off voltage 42v±1%, maximum charging current 1a. Mini usb lithium battery charging board with overcharge and overdischarge protection. Battery over discharge protection voltage dc25v, battery over current protection current 3a. On-board mini usb and soldering joints 5v input`port and charging status indicator(red indicator is charging,green indicator is full charged). Ship out by e-packet with tracking information and 7-17 days delivery time.
Yeeco LCD Digital Battery Capacity Monitor DC 8-63V Lithium Battery Capacity Tester, 12V/24V/36V/48V Lead Acid Battery Panel Gauge, Suitable for Car/ Mobile Power etc (Blue LCD Digital Display)
- Applicable battery suitable for the 3-15 series lithium battery and 12-48v lead-acid battery, ternary lithium battery, polymer lithium-ion battery, lithium ion battery, storage battery, water battery, etc. Widely application various instruments and meters、portable device、mobile power、medical equipment、electrombile etc. Wide operating voltage range dc 8-63v. With lcd display, can clearly see the battery electric quantity, convenient to use please note the monitor can not be exposed to sunlight for the long time. The red line is connected with the battery positive and black line is connected with the battery negative and pay attention to the plug direction, the interface of the monitor.
PowMr 60amp 48V 36V 24V 12V Auto MPPT Solar Charge Controller Max 190VDC Input LCD Backlight Solar Charge for Vented Sealed Gel NiCd Lithium Battery (60A)
- • Excellent heat dissipation protection intelligence fan-on temperature >45℃. • Built-in dsp controller with high performance automatic battery voltage detection 12v/24v/36v/48v. • 100% mppt controller intelligent, max efficiency ≥981%, pv utilization ≥99%. • Battery options：vented,sealed,gel, nicd, lithium batterydynamic large icon display pv and battery status,working mode night mode, no charging, mppt mode, absorption mode, floating mode and troubleshooting prompts. • 2 years warrantylarge four big button, easy to use, more conveniently.
SMAKNSMAKN 3S Li-ion Lithium Battery Charger Protection Board 10.8/11.1V/12.6V 30A Overcharge/Over-discharge/Overcurrent/Short-circuit Protection Circuit Board Automatic Activation
- Main features over charge protection, over-discharge protection, short circuit protection, overcurrent protection. The module name 3 string lithium battery protection board. No part design on the back, can be attached to the heat sink to ensure that large currents to work long hours. Operating current 15a (natural cooling 10a, additional heat sink 15a, the maximum instantaneous current of 30a). The modular nature polymer lithium battery protection board.
Icstation 7.4V 3A 2S Lithium Battery Protection PCB BMS Board for 18650 18550 Li-ion Lipo Battery Cell Pack
- Pcb size 33 x 7 x 08mm/130 x 028 x 003inch(lwh). Overcharge protection voltage 425v±0025v, over-discharge protection voltage 25v±0025v. 74v 3a 2 cell li-ion battery charge discharge protection board with japan battery control ic and 8205a mosfet protection ic supporting short circuit protection with automatic recovery. Continuous discharging current 25a-3a. Ship out by e-packet with tracking information and 7-17 days delivery time usually.
Icstation 14.4V 30A 4S Lithium Battery Protection PCB BMS Board Lipo Battery Capacity Tester MOdule Set
- Ship it out by e-packet with tracking information and 7-17 days delivery time usually. 128v 144v 15a 4 series li-ion battery charge discharge protection board with high working current up to 30a. Overcharge detecting voltage39±0025v,over discharge detecting voltage230±008v. 4 sections led display the battery voltage enablue the user easy to recongnize the battery status.
DROK DC 8-63V Lead Acid Battery Tester, 12V/24V/36V/48V LCD Digital Battery Capacity Monitor Panel Gauge, Lithium Battery Status Indicator, Universal Car Vehicle Auto Electric Quantity Detector
- Simple installation two wire simple wiring (red wire battery + black wire battery, white plug the interface of the monitor (please pay attention to the direction of the interface). Wide application drok battery panel can be applied to various instruments and meters portable device power bank medical device, electrombile, self-balance car. Suitable for various battery specifications drok lcd battery capacity tester is suitable for 12v/24v/36v/48v lead acid battery and 3-15 series lithium ion battery one meter can meet your various need. Wide working voltage range this battery monitor can tolerate widest working voltage range (dc 8-63v). High quality lcd display our auto battery tester owns a high quality and clear lcd display, super bright green back-light, easy and convenient to check the battery status.
Aluoflower 3S 20A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board 12.6VModule
- 9x2cm/2. 79inch quantity 1 pc note please allow 1-3mm error due to manual measurement. Strictly according to the diagram wiring 0v/4. 32×0. 6v,otherwise it will cause damage to the chip. The internal resistance of 3 battery capacity are closer will be better. Description features suitable range for nominal voltage 3. Thank you package contents 1 x pcb protection board. 2v/8. 2. After connection,it need to first charge activation, then will have the output. 7v lithium battery(including 18650,26650, lithium polymer batteries) precautions 1. Attention do not mix the good battery and poor battery to use. 6v 3. 4v/12. 6v maximum output current 20a maximum output power / charging power 252w size 5. Please buyers know the professional knowledge of this module before buying specifications materialmetal charging voltage 12. Pls make sure you do not mind before you bid due to the difference between different monitors, the picture may not reflect the actual color of the item.
KNACRO 4S Li-ion Lithium Battery Charger Protection Board 14.4V 14.8V 16.8V Overcharge Over-discharge Overcurrent Short-circuit Protection Circuit Board Automatic Activation
- Has overcharge protection, over-discharge protection, short circuit protection and over-current protection. No part design on the back, can be attached to the heat sink to ensure working in large current for a long term. Connection welding, more solid large current low resistance mos pipe makes less heat. With automatic activation function, automatically cancel the protection after protection conditions recovery. 4-series lithium battery protection board, suitable for 144v/148/168v lithium battery pack.
Icstation 12.8V 14.4V 15A 4S Lithium Battery Protection PCB BMS Board for 18650 18550 Li-ion Lipo Battery Pack (Pack of 2)
- Working current15a(need heatsink), board size50 x 22 x 4mm/197 x 087 x 016inch(lwh). Ship out by usps with tracking information and 7-17 days delivery time usually. Overcharge detecting voltage39±0025v, overcharge release voltage38±005v. Over discharge detecting voltage230±008v, over discharge release voltage270±01v. 128v 144v 15a 4 cell lai-ion battery charge discharge protection board.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
