Ken Tool Heavy Truck and Trailer Tire Changing Iron Mount Demount with TruckFaultCodes License
- 37″ tire iron forged from 3/4″ iron stock. Angled tip easily slips between the bead and rim and helps to prevent cutting or ripping the bead or sidewall. Approved bead-breaker or duck-bill hammer (not included) needed for dismounting tire. Slip free grip on the rim and bead. Use on truck, agricultural, and industrial tires.
Scissor Car Jack 2 Ton Wind Up Stabilizer Lift Tire Changing Tool for Van Truck Vehicles 105-385mm
- 89cm height/capacity curve this device is designed to sustain the following loads at these specified heights. Make sure that the saddle is correctly positioned. Check before each use for abnormal conditions such as cracked welds, leaks, damaged, loose or missing parts. 4. Do not exceed the rated capacity for each position. 3. Store the handle with care. 2. 2. 1kg item size 418. To lower load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle counterclockwise slowly. Inspect the jack immediately if lift is believed to have been subjected to an abnormal load or shock. Package included scissor jack x 1 handle x 1 specification condition brand new minimum height about 105mm maximum height approximately 385mm lifting 2t color black material steel net weight 2. Operating instructions 1. Before use 1. To raise load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle clockwise. To prevent damage to the jack, do not move the jack while the handle is intact in the socket. Care and maintenance 1. 2. Always keep jack clean and keep the screw and bearings well lubricated. When jack is not in use, lifting arm should be in full down position. Insert the jack handle into the hole of the handle socket. If the jack is found to be damaged, it should be removed from service until properly repaired. 3. 3.
Motorcycle Rim Protector Set of 3 with a Bonus Carry Pouch. Bike & Car Wheel Rim Protector Tire Guard to Shield Your Wheel Rims from Becoming Damaged When Using Tire Changing Tools! From BigPantha
- Universal wheel application will fit practicaly all motorcycle and car rims. Never loose them comes supplied in a convenient to use carry pouch, for protection when not in use, ready storage, and easy access slips into your tool box, or your pocket equally well. Protect your wheel rims slips between the wheel and tire to protect your wheel rims from being scratched or damaged by tire changing tools such as tire levers. Super tough many rim protectors don’t last more than a few tire changes since they damage easily and fall apart after use these new longer lasting bigpantha rim protectors are made from a super tough thermoplastic polyurethane (tpu), which is more durable than rubber, pvc or plastic. Hassle free use cords attached to the rim protectors in order to enable easy retrieval should a rim protector falls into the tire whilst being removed.
IPCW TJ101 Black Spare Tire Changing Tool Kit with Bag for GM – 6 Piece
- Hardened automotive grade steel with polished chrome finish. Tire changing tool kit incl bag. 3-piece tire lever spoons with rim protectors. Come with rim protector, protects your wheel from scratches and dings caused by tire changing tools. Perfect for motorcycle/bike tire changes.
Yuehua 4PCS Bike Tire Tyre Spoon Changing Tool
- Strong, durable metal set, ideal for toolbox and workshop. Ergonomic bend with spokes-capture slot. Tools are overall sleek, which will not hurt your rims pry, even not hurt your tube. Made of iron material, strong enough to remove some of the toughest tires. 4 premium heavy duty bicycle tire iron spoon tools.
AME 71050 ‘Golden Buddy’ Tire Changing System Mount Demount Iron Tool Set for Heavy-Duty Trucks and Trailers with TruckFaultCodes License
- All you do is select your ecm, select your code, then view code solutions. The golden buddy tire changing system makes quick and easy work of mounting and demounting truck and trailer tires. No more fighting the tire on and off the rim. Mack mdrive and volvo i-shift. This system includes a mounting bar, demounting tool and bead keeper. Transmission coverage includes allison, eaton. Truckfaultcodes is an easy-to use mobile freindly website that quickly gives you repair information on your diagnostic trouble codes. Your purchase today includes a 12 month subscription to truckfaultcodes (a $200 value). Cab & chassis coverage includes kenworth, peterbilt, freightliner, volvo, mack and international. Engine coverage includes cummings, detroit, mack volvo, cat, international, paccar, ford, isuzu, fuso, hino, ud nissan mbe900/4000.
Tire Bead Seater Tires Air Pumper Tool Roller Changer Blaster Tire Changing Tools – House Deals
- This item does not include the air bead seater. This great tool rapidly pumps up the air evenly without any intermittent flow it will fit on all the bead seater.
Truck Spare Tire Changing Tools Wheel Lug Nut Wrench Kit Replacement for Dodge Ram 1500 2002-2015 (with Carry Bag)
- Made of 45# carbon steel and q195 high frequency welded pipe durable & weather resistance. Guaranteed to fit dodge ram 1500 2002-2015 oem factory direct high quality. 5 pieces wrench tools includes 1x tire lug wrench 3x extension segments 1x jack hook extension 1x convenient carry case. Fast free delivery 2 year warranty. Use the kit to loosen/ tighten wheel lug nuts raise/lower the spare tire from under the vehicle raise/lower the jack that comes with your vehicle (jack not included).
Spare Tire Changing Tools Lug Wrench Extension Irons for Chevrolet Silverado 1500 2500 3500 (2000-2014) + Scissor Jack with Speed Handle 2 Ton Capacity US Ship
- Wrench kit designed for 2000-2014 chevy silverado (excludes hybrid) & 2000-2014 gmc sierra (excludes hybrid). Package includes 1x tire lug nut wrench + 1x piece that hooks into your jack + 2x extension pieces + 1x convenient case + 1x scissor jack(with crank handle). Scissor jack 105 to 385mm lift range 2 ton capacity easy operate with crank speed handle. Wrench part number ref 22969377, 20782708, 22925285, 20782706, 22969370,15854614. Us stock shipping 2 year warranty.
Steel Scissor Jack Black Rustproof 2 Ton Capacity/385mm Max.Height with Chromed Speed Crank Handle Tire Changing Tools for Car Van Truck Vehicles, 1PCs US Ship
- 5 us local shipping fast & free delivery. 2 high quality material heavy duty construction rated to 2 tonne capacity. 4 suitable for small and medium sized vehicles such as cars, toyota, nissan, kia, buick, santana, bmw, honda, ford, chevrolet and much more. 3 item size (cm) 41 x 88 x 9 user can easily store it along with other tools in your car boot space. 1 lifting range 42 inch, 14 inch (105mm, 385mm).
1 Year warranty!!!-Three Spoon Motorcycle Tire Levers Irons Changing Tool Kit with Case Set of 3 for Harley Davidson Yamaha Suzuki Honda BMW (Kit)
- Come with rim protector, protects your wheel from scratches and dings caused by tire changing tools. Package includes 3 x tire spoons. Works great on atv,motorcycle,bike,garden tractor,lawn tractor, snow blower,riding lawn mowers’ tires,remove and reinstall motorcycle tires with minimal fuss. Tools are 280mm long (approximately 11″), have a beautiful polished chrome finish, and come with a convenient carry case. One year warrantyperfect for motorcycle/bike tire changes.
Sedeta Tire Changing Tool Multi-use lever Material: iron one end flat spoon shaped and the other a narrow hooked shape
- Forged steel for light weight and super strength. Great for motorycle, motocross, atv, supermoto, mountain bike, bicycle etc. Rounded corners no sharp edges, designed not to pinch tubes. 100% brand new and high quality. One end is flat for holding and prying with the other curved for a better grip on the bead.
Onmi Motorcycle Spoon Type Tire Levers Tire Iron Changing Tools (Pack of 2)
- Package includes2 pieces spoon type tire iron. 10-inch spoon type tire irons are a great addition to your trail pack or tool box. Looped end fits comfortably in your hand. Wide spoon design makes for easier tire removal and installation while helping prevent accidental tube pinching. Rubber coated end for adds comfort and keeps your hand from slipping off.
Autvivid 3 Sets Motorcycle Rim Protector Bike Car Wheel Rim Protector Tire Guard to Shield Your Wheel Rims from Becoming Damaged When Using Tire Changing Tools (Come with a Carry Pouch)
- Durable, made from a super tough thermoplastic poly urethane (tpu), which is more durable than rubber, pvc or plastic. Universal, fit almost every motorcycle and car rims. Easy to get started, attached to the rim protectors by cords so that it will be easy to retrieve when rim protector falls into the tire. Protective, slips between wheels and tires to protect your wheel rims from being scratched or damaged by tire changing tools such as tire levers. Easy to storage, with attached carry pouch, the protector will easy to storage / access.
Motorcycle Wheel Protector , Anweer Bike & Car Wheel Rim Protector Set of 3 with a Free Carry Pouch Tire Guard to Shield Your Wheel Rims from Becoming Damaged When Using Tire Changing Tools!
- Protect your wheel rims slips between the wheel and tire to protect your wheel rims from being scratched or damaged by tire changing tools such as tire levers. Hassle free use cords attached to the rim protectors in order to enable easy retrieval should a rim protector falls into the tire whilst being removed. Never loose them comes supplied in a convenient to use carry pouch, for protection when not in use, ready storage, and easy access slips into your tool box, or your pocket equally well. Super tough many rim protectors don’t last more than a few tire changes since they damage easily and fall apart after use. Universal wheel application will fit practicaly all motorcycle and car rims.
Spare Tire Changing Tools Kit for Chevy Silverado 1500/GMC Sierra 1500 Lug Wrench Extension 4PCs Set + Scissor Car Jack 2 Ton/105-385mm Capacity
- Wrench part number ref 22969377, 20782708, 22925285, 20782706, 22969370,15854614. Wrench kit designed for 2000-2014 chevy silverado (excludes hybrid) & 2000-2014 gmc sierra (excludes hybrid). Package includes 1x tire lug nut wrench + 1x piece that hooks into your jack + 2x extension pieces + 1x convenient case + 1x scissor jack(with crank handle). Scissor jack 105 to 385mm lift range 2 ton capacity easy operate with crank speed handle. Us stock shipping 2 year warranty.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
