Top 16 Best Steel Welding Wires

 

INETUB BA71TGS 035-Inch on 2-Pound Spool Carbon Steel Gasless Flux Cored Welding Wire #ad

INETUB BA71TGS .035-Inch on 2-Pound Spool Carbon Steel Gasless Flux Cored Welding Wire

INETUB BA71TGS .035-Inch on 2-Pound Spool Carbon Steel Gasless Flux Cored Welding Wire #ad - Low spatter, full slag coverage, easy slag removal, porosity free, good bead appearance. Shielding gas is not required, all positions, single and multi pass welding. Made in italy from the finest quality materials using state of the art technology under highly respected labour conditions. Gasless flux cored welding wire aws e71t-gs, smooth arc action, high feedability, easy to weld.

 

Best Welds Er308L Stainless Steel Welding Wire 023 In Dia 4 In Long 2 Lb Carton - 2 Lb #ad

Best Welds Er308L Stainless Steel Welding Wire, .023 In Dia., 4 In Long, 2 Lb Carton – 2 Lb

Best Welds Er308L Stainless Steel Welding Wire, .023 In Dia., 4 In Long, 2 Lb Carton – 2 Lb #ad - Very similar to type 308 but has a carbon content held to a max of 0. Can also be used for welding types 321 and 347 stainless steels. Used for welding types 304, 304l, 308 and 308l stainless steels. 03% to avoid carbide precipitation.

 

WeldingCity ER308L Stainless Steel MIG Welding Wire 2-Lb Spool 0035 09mm #ad

WeldingCity ER308L Stainless Steel MIG Welding Wire 2-Lb Spool 0.035″ (0.9mm)

WeldingCity ER308L Stainless Steel MIG Welding Wire 2-Lb Spool 0.035″ (0.9mm) #ad - Specification aws a59/asme sfa a59/er308l 2-lb net weight of stainless steel welding wire 4″ spool wrapped in moisture-resistant plastic film typical deposited chemical composition % c=002, si=032, mn=170, p=001, s=0009, cr=200, ni=10, remain=fe. Features and applications for mig (gmaw) welding process for 304, 304l, 308, 308l, 321 and 347 stainless steels with a carbon content held to a max of 03% to to reduce the possibility of intergranular carbide precipitation most popular stainless wire for general-purpose applications where corrosion is moderate and applications at cryogenic temperatures shielding gas required, usually argon/co2 mix. Premium quality er308l stainless steel mig welding wire 2-lb spool. Package of one (1-pk), two (2-pk) and five (5-pk) er308l mig welding wire 2-lb spools available us based welding supplier strong technical support with experienced customer service to address buyer’s any question. Available wire diameters 0023″ (06mm), 0030″ (08mm), 0035″ (09mm), 0045″ (12mm).

 

Imperial 89085 Solid Carbon-steel Welding Wire 0035 #ad

Imperial 89085 Solid Carbon-steel Welding Wire 0.035

Imperial 89085 Solid Carbon-steel Welding Wire 0.035 #ad - Weld-it mig wires have minimal spatter and easy slag clean up. Great for construction work, farm implement, fabrication, shaft build-up, tanks, truck bodies and general shop application with poor fit-up or rusty, oily plates. Highlights excellent weldability with or without shielding gas.

 

Harris 0308LE5 308L Welding Wire Stainless Steel Spool 0030 x 10 lb #ad

Harris 0308LE5 308L Welding Wire, Stainless Steel Spool, 0.030″ x 10 lb.

Harris 0308LE5 308L Welding Wire, Stainless Steel Spool, 0.030″ x 10 lb. #ad - 03% maximum carbon content increases resistance to inter-granular corrosion. Similar usage as 308, but the.

 

316LSI 030 X 2 lb Spool MIG stainless steel welding wire Blue Demon #ad

316LSI .030 X 2 lb Spool MIG stainless steel welding wire Blue Demon

316LSI .030 X 2 lb Spool MIG stainless steel welding wire Blue Demon #ad - Aws specification aws a59/a59m2006 aws classification er316lsi welding current dcep typical wire chemistry c 003 cr 180, 200 ni 110, 140 mo 20, 30 mn 10, 25 si 065, 100 p 003 s 003 cu 075. Typical mechanical properties (as welded) yield strength ksi 1000 tensile strength ksi 90 elongation% min 37 welding positions fvohh available diameters mig with operating range in amps 023″ 35, 70 030″ 50, 100 035″ 100, 150 045″ 150, 200 available diameters tig with operating range in amps 035″ 60, 90 045″ 80, 110 1/16″ 90, 130 3/32″ 120, 175 1/8″ 150, 220 5/32″ 170, 350.

 

Firepower - ER70S-6 Mild Steel Welding Wire 030 11 Lbs #ad

Firepower – ER70S-6 Mild Steel Welding Wire .030″ 11 Lbs.

Firepower – ER70S-6 Mild Steel Welding Wire .030″ 11 Lbs. #ad - Very similar to type 308 but has a carbon content held to a max of 003% to avoid carbide precipitation. Can also be used for welding types 321 and 347 stainless steels. Used for welding types 304, 304l, 308 and 308l stainless steels.

 

Hobart H522506-R19 0030-Inch 2-Pound ER308L Stainless Steel Welding Wire #ad

Hobart H522506-R19 0.030-Inch 2-Pound ER308L Stainless Steel Welding Wire

Hobart H522506-R19 0.030-Inch 2-Pound ER308L Stainless Steel Welding Wire #ad - Item is manufactured in united states. Provides excellent notch toughness at very low temperature. 2-pound spool. An extra low carbon wire for the welding of type 304l, 321 and 347 stainless steels. This product is easy to use easy to install and highly durable. These hobart mig wire rolls have the smooth and clean surfaces required for efficient wire feed.

 

ER70S-6 030 Mig Mild Steel Welding Wire 33 lb Roll #ad

ER70S-6 .030″ Mig Mild Steel Welding Wire 33 lb Roll

ER70S-6 .030″ Mig Mild Steel Welding Wire 33 lb Roll #ad - 86 / mn 1. 007 typical mechanical properties of all-weld metal y. 53 / p 0. Aws a5. 012 / s 0. S 450 mpa / t. List your items fast and easy and manage your active items. 030″ x 33 lbs typical chemical composition of wire (%) c 0. 18-05 er70s-6 1 spool/ea of 0. S 550 mpa / el 30% / iv at -30 c 70 j powered by ebay turbo lister the free listing tool. 07 / si 0.

 

WeldingCity ER70S-6 ER70S6 Mild Steel MIG Welding Wire 2-Lb Spool 0030 08mm #ad

WeldingCity ER70S-6 ER70S6 Mild Steel MIG Welding Wire 2-Lb Spool 0.030″ (0.8mm)

WeldingCity ER70S-6 ER70S6 Mild Steel MIG Welding Wire 2-Lb Spool 0.030″ (0.8mm) #ad - Package of one (1) er70s-6 2-lb welding wire spool us based welding supplier strong technical support with experienced customer service to address buyer’s any question. Specifications aws a518/asme sf a518/er70s-6 2-lb weight of welding wire 4-in spool, 5/8-in center hole wrapped in moisture-resistant plastic film. Premium quality mild steel mig welding wire er70s-6 2-lb spool. Features and applications good wetting and flatter bead shape as well as the capability of faster travel speeds general purpose welding wire for mild steel used with 75/25 (argon/co2) shielding gas or with higher contents of argon, such as 90/10 or 100% co2. Available wire diameters 0023″, 0030″, 0035″ and 0045″.

 

ER308L - MIG Stainless Steel Welding Wire - 275 Lb x 0035 #ad

ER308L – MIG Stainless Steel Welding Wire – 27.5 Lb x 0.035″

ER308L – MIG Stainless Steel Welding Wire – 27.5 Lb x 0.035″ #ad - The maximum carbon content of less than 003% preserves the intergranular corrosion resistant properties of the weld deposit and weld zone, yielding x-ray quality welds. General purpose stainless steel mig wire for welding 19% chromium, 9% nickel austenitic stainless steels such as 304l, 308 l as well as stabilized grades 321 and 350. For shielding gas use 100% argon or argon/helium for greater penetration and higher speeds. Common applications include stainless steel fabrication of dairy, food or restaurant equipment, chemical tanks and general purpose applications where corrosion conditions are only a moderate concern suitable for cryogenic applications. Select the right wire form the menu available sizes 0030″, 0035″ and 0045″, spool weight 33 lb.

 

Billion_Store by ER70S-6 Mild Steel Welding Wire 030 11 Lbs FPW1440-0216 Industrial Products Tools #ad

Billion_Store by ER70S-6 Mild Steel Welding Wire .030″ 11 Lbs. FPW1440-0216 Industrial Products & Tools

Billion_Store by ER70S-6 Mild Steel Welding Wire .030″ 11 Lbs. FPW1440-0216 Industrial Products & Tools #ad - International buyers all electric tools and cordless tool chargers are standard usa voltage (120 volt) unless otherwise stated in listing. Fpw1440-0216 er70s-6 mild steel welding wire. 030″ 11 lbs. We have warehouses in multiple states. Part number 1440-0216 fpw1440-0216 brand firepower ship weight 12 lbs. Er70s-6 mild steel welding wire. 030″ 11 lbs. International orders that don’t include shipping costs in their payment will not be shipped until shipping has been paid for, foreign duties are not included.

 

Spool MIG Stainless steel welding wire Blue Demon 309LSI 030 X 2 lb #ad

Spool MIG Stainless steel welding wire Blue Demon 309LSI .030 X 2 lb

Spool MIG Stainless steel welding wire Blue Demon 309LSI .030 X 2 lb #ad - Aws specification aws a59/a59m2006 aws classification er309lsi welding current dcep typical wire chemistry c 003 cr 230, 250 ni 120, 140 mo 075 mn 10, 25 si 065, 100 p 003 s 003 cu 075. Typical mechanical properties (as welded) yield strength, ksi 64 tensile strength, ksi 87 elongation%, min 41 welding positions f,v,oh,h available diameters mig with operating range in amps 023″ 35, 70 030″ 50, 100 035″ 100, 150 045″ 150, 200 available diameters tig with operating range in amps 035″ 60, 90 045″ 80, 110 1/16″ 90, 130 3/32″ 120, 175 1/8″ 150, 220 5/32″ 170, 350.

 

4 spools of Fema E70S-6 024 1lb General Purpose Mild Steel MiG welding wire #ad

4 spools of Fema E70S-6 .024″ 1lb General Purpose Mild Steel MiG welding wire

4 spools of Fema E70S-6 .024″ 1lb General Purpose Mild Steel MiG welding wire #ad - Standard mini 4″ spool with 5/8″ spindle hole opening. Excellent for 115v and 230v portable migs. 4 x fema 024 er70s-6 mild steel wire excellent for welding thin material. Use with ar/co2 or co2 gas. High quality general purpose mild steel mig wire.

 

Spool MIG Stainless Steel Welding Wire 309LSI 023 X 2 lb Blue Demon #ad

Spool MIG Stainless Steel Welding Wire 309LSI .023 X 2 lb Blue Demon

Spool MIG Stainless Steel Welding Wire 309LSI .023 X 2 lb Blue Demon #ad - Er70s-2 035 mig steel welding wire 2lb spool compatible with blue demon. Er309lsi is similar in composition to er309l with a higher silicon content, which produces weld beads that are exceptionally smooth due to good wetting action 309lsi is a great choice when cosmetic appearance is important.

 

Stainless Steel Welding Wire Blue Demon 308LSI 030 MIG 10 lb Spool #ad

Stainless Steel Welding Wire Blue Demon 308LSI .030 MIG 10 lb Spool

Stainless Steel Welding Wire Blue Demon 308LSI .030 MIG 10 lb Spool #ad - Er308lsi has the same analysis as er308l but with a higher silicon content the higher silicon content improves arc stability, bead appearance and wetting action er308lsi produces exceptionally smooth welds for applications that require a good cosmetic appearance this product is used primarily with welding grades 304 and 308. Aws specification aws a59/a59m2006 aws classification er308lsi welding current dcep typical wire chemistry c 003 cr 195, 220 ni 90, 110 mo 075 mn 10, 25 si 065, 100 p 003 s 003 cu 075.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.