FIT TOOLS 3/8″ Heavy Duty Dr. Pneumatic Impact Wrench
- Square drive 3/8 ” dr 2. Free speed 6500 rpm 6. Avg. Working pressure 90 psi (6. Torque 350 ft / lbs (475 nm) 4. Air hose 3/8″id. The max. 5 cfm 7. Torque is 350 ft / lbs (475 nm) 8 position for tightening selection. Digital torque 260 ft / lbs (350 nm) 5. Specification 1. 2 bar) 8. Max. Our 3/8 ” air impact wrench is low weight but with high torque. Working torque range 50, 300 ft / lbs (65-405nm) 3. Air inlet 1/4″ 9. Air cons 4.
Generic QYUS416021535581658 Impact Wrench 1150 Duty Ne New 3/4″ Air Heavy D Heavy Duty Air Imp Torque Auto Repair Repair ft/lbs Maximum orque Auto Repair
- —-Note—- and if any questions, please contact us first before using a—/to–/-z or neg-a-t-iv-efee-db-a-c-k or char-g-e-ba-ck or other ama-zo-n procedure which will give us lots of troubles description condition brand new product details features included brand new 3/4″ square drive composite air impact wrench max torque 1,150 ft/lb free speed 3,800rpm air inlet 3/8″ npt w/ 1/4″ adapter air pressure 6. 3 bar @ 90 psi rear exhaust, short shank, light weight suggested air compressor 2hp or above.
Chicago Pneumatic Tool CP7782-6 Heavy Duty 1-Inch Impact Wrench with 6-Inch Extended Anvil
- The chicago pneumatic cp7782-6 1″ heavy duty impact wrench with 6″ extended anvil has great power for the toughest jobs on truck, bus and heavy equipment applications. Regulator with integrated forward/reverse with 3 position power settings in both directions. Ergonomic side handle and socket retainer ring combined with hole retainer.
Klutch Heavy-Duty Air Impact Wrench – 1in. Drive, 2500 Ft.-Lbs. Torque, 5,000 RPM, 8in. Anvil
- Operating psi 90, reversible yes, case included no, forward torque ft. Minimum hose size. Working torque 5000 rpm free speed 700 ipm in impact mode twin hammer design for hard-hitting impacts d-handle with inside trigger for comfort and control side support handle for better control forward/reverse switch 1in. -Lbs. Forward torque 400-1800 ft. 2,500, average air consumption cfm 10, max. -Lbs. 20 3/4, max. 24. The 1in. Air inlet 1/2in. Torque in reverse 1800 ft. -Lb. 1, tool length in. -Lbs. 1 1/4, hammer mechanism twin hammer, speed, no load rpm 5,000, tool weight lbs. 1/2, drive in. Extended anvil for expanded reach 10 cfm average air consumption 1/2in. Delivers up to 2500 ft. Forward torque to loosen the most stubborn bolts. -Lbs. -Lbs. 3. 1/2, noise level db 97, standard bolt capacity in. Its twin hammer design produces hard-hitting impacts. Air impact wrench delivers a whopping 2500 ft. -Lbs. This heavy-duty impact wrench can handle the toughest applications in your garage or shop. Max. Square drive has an 8in. Tough wrench has both a d-handle and side handle for better comfort and control when operating. 400-1,800, min. Extended anvil to expand your reach. The klutch heavy-duty 1in. Square drive 8in. 2,500, impacts per minute ipm 700, variable speed yes, working torque ft. Reverse torque ft. Of torque in reverse and 1800 ft. 1800, inlet size in. Max. Hose size in. -Lbs. Torque ft. -Lbs.
FIT TOOLS Made in Taiwan 1/2″ Heavy Duty Dr. Pneumatic Impact Wrench with CR-V Sockets Kit
- Free speed 5500 rpm 6. Digital torque 470 ft / lbs (630nm) 5. 11. 24. Max. 10. Torque is 780 ft / lbs (1055 nm) 8 position for tightening selection. 2 bar) 8. Square drive 1/2 ” 2. 22. Specification of air impact wrench 1. Air hose 3/8″ id contents 1 pcs 1/2″ heavy duty impact wrench 10 pcs 1/2″ impact cr-v sockets (9. Air inlet 1/4″ 9. 17. 14. Avg. 13. The max. Working pressure 90 psi (6. Air cons 4. Torque 780 ft / lbs (1055 nm) 4. Our 1/2″ air impact wrench of this set is low weight but with high torque. 27mm) 1 pcs 5″ extension bar 1 pcs mini oiler 1 pcs nipple 1 pcs l type 4mm hex. 5 cfm 7. 19. Key wrench 1 pcs blow mold case. Working torque range 60, 700 ft / lbs (80-950nm) 3.
Generic YC-AUS2-150922-111 Repairrench 1150 Impact Wrench 1150 Heavy Duty ft/lbs Maximum New 3/4″ Air Torque Auto Repair Heavy Duty
- Description condition brand new product details features included brand new 3/4″ square drive composite air impact wrench max torque 1,150 ft/lb free speed 3,800rpm air inlet 3/8″ npt w/ 1/4″ adapter air pressure 6. 3 bar @ 90 psi rear exhaust, short shank, light weight suggested air compressor 2hp or above.
Sunex SX821A 3/8-Inch Heavy Duty Impact Wrench
- Torque (ft. 8. The tools you need to get it done-whether drilling, driving, grinding, cutting, sanding, spraying or hammering, sunex tools air tools supply you with power, flexibility and exceptional value. ) 30-60 , free speed (rpm) @ 90psi 10,000, air inlet 1/4, recommended air pressure 90, avg. Lbs. Lbs. Air consumption 4, sound level 84, length 5, weight 2. Specifications square drive 3/8, max. @90psi) 75, working torque (ft. When you need performance, you need sunex tools air tools.
1″” Drive Heavy Duty Impact Wrench Tools Equipment Hand Tools
- The estimated shipping cost will include this fee. The integral 460 degrees swivel inlet makes kinked hoses a thing of the past. Features and benefits high efficiency, 6 vane air motor 1,450 ft. This product meets the large package requirement per ups/fedex. Side handle provides excellent maneuverability. /Lbs of maximum torque with a 5,000 rpm free speed 3 position power regulator includes protective boot kit the irt285b model combines exceptional power, durability and operator convenience.
Astro 157 3/4-Inch Heavy Duty Impact Wrench with 2-Inch Anvil, 800-Feet Pound Torque
- 5″ (243mm),net weight 10. Torque) features are durable twin hammer impact mechanism, anvil and rotor made of special alloyed steel that is heat treated to prevent chipping or breaking. Two piece construction for easy maintenance. Size 3/8″, avg. Specifications square drive 3/4″ (19mm),free speed 4,800rpm,overall length 9. Steel hammer case provides maximum protection. Lb. 3kg/cm2), sound level 95dba. The astro pneumatic 157 3/4″ heavy duty impact wrench with 2″ anvil (800 ft. 6-pound (4. 8kg),maximum torque 800 ft/lbs. 2cfm (205l/min), air pressure 90 psi (6. D. Air consumption 7. , Bolt capacity 1-1/16″ (27mm), air inlet thread npt 1/4″, air hose i. Pressure feed lubrication system.
1″” Drive Heavy Duty Impact Wrench with 6″” Anvil Tools Equipment Hand Tools
- /Lbs. /lbs. New fast-torque feature delivers 1,000 ft. In 2 seconds new increased pressure rating can withstand 120 psi for better durability improved feather-touch trigger free chemical resistant protective boot helps prevent damage if you want exceptional power, durability, and ease-of-use from an impact wrench, the ingersoll-rand 285b delivers. The estimated shipping cost will include this fee. Features and benefits maximum torque 1,770 ft. Not only will the irt285b-6 easily handle whatever task you put it to, the impact will also help you maneuver more comfortably thanks to its professional touch trigger, swept-back side handle for superior balance, and “angle-down” exhaust. The 6″ anvil helps with leverage and getting into hard to reach places. This product meets the large package requirement per ups/fedex.
Chicago Pneumatic CP724H 3/8-Inch Drive Heavy Duty Impact Wrench
- Differential regulator allows the operator to match the required power. Applications transmissions, exhaust systems, body shops, general repair in the 3/8-inch range. Improved oil bath dyna-pact clutch delivers higher performance and extended durability. Ultimate torque 200 ft-lbs. Handle exhaust directs air away from the workpiece and operator integral 360 degree air inlet swivel keeps air hose from being twisted and kinked.
SP Air Corporation SP-1194-8 Heavy-Duty Impact Wrench with 8″ Extended Anvil, 1″
- Auxiliary side handle is adjustable to any angle for maximum control made in japan. 3 speed positions control gives more control when tightening fasteners, full power reverse for easier removing of fasteners. 1,800 ft/lb max torque, higher torque for stubborn fasteners and lightweight aluminum housing weighing 15 lbs. Sealed-in oil bath lubrication always keeps impact mechanism lubricated for less wear and longer tool life. Twin hammer mechanism is durable and hard hitting using fewer parts and less down time.
Craftsman Heavy-Duty Impact Wrench, 1/2″ Drive (3 Pack)
- Powerful, quiet, smooth, and quick, this wrench features an oil-lubricated twin hammer system that weighs a comfortable 4. Other features include a swivel air inlet for freedom of movement. Its patented dynamic silencing system also offers high performance and a peaceful work environment. 5 lb. Provides over 580 ft/lb of torque.
Generic orque Auto Re ft/lbs Maximum Auto Re Impact Wrench 1150 1150 Heavy Duty ench 1150 Torque Auto Repair w 3/4″ Air Im New 3/4″ Air
- Description condition brand new product details features included brand new 3/4″ square drive composite air impact wrench max torque 1,150 ft/lb free speed 3,800rpm air inlet 3/8″ npt w/ 1/4″ adapter air pressure 6. 3 bar @ 90 psi rear exhaust, short shank, light weight suggested air compressor 2hp or above.
Craftsman Heavy-Duty Impact Wrench, 1/2″ Drive (2 Pack)
- 5 lb. Other features include a swivel air inlet for freedom of movement. Provides over 580 ft/lb of torque. Powerful, quiet, smooth, and quick, this wrench features an oil-lubricated twin hammer system that weighs a comfortable 4. Its patented dynamic silencing system also offers high performance and a peaceful work environment.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
