Runva 10HX Hydraulic Winch 10,000lbs with Mounting Plate and Snatch Block
- Tow truck bracket mounting kit bolt pattern 217″ x 197″ x 45″ (550mm x 500mm x 1143mm) 4-m12. Motor displacement 50ml/r, pressure 125mpa, oil flow 15~40l/min. Winch mounting bolt pattern (warn’s stand) 10″ x 45″ (254mm x 1143mm) 4-m10. Steel cable (dia x l) 3/8″ x 656′ (92mm x 20m). Power in/out, winch pulls in both direction.
Mile Marker H-Series Hydraulic Winch – 10,500-Lb. Capacity, 12 Volt DC, Model# H10500
- ) 4 1/2 x 10, clutch freespooling, rope type galvanized aircraft cable, line speed (fpm) 31, line pull (lbs. The mile marker h-series hydraulic winch can be mounted to the front or rear of the vehicle as a permanent or detachable recovery system. ) 12, battery leads yes, volts 12, switching method remote control, mounting bolt pattern l x w (in. This system is independent from its solenoid control valve to give more freedom in mounting options and vehicle application. ) 15 x 28 x 10, braking mechanical lock, rope size l x dia. Fairlead type galvanized 4-way roller, gear ratio 6 1, mounting hardware included yes, dimensions l x w x h (in. X in. (Ft. ) 100 x 3/8, remote length (ft. ) 10,500, gear train planetary.
WARN 74125 Series 18 Hydraulic Winch
- Heavy-duty disc brake for dependable operation and plenty of holding power. Meets sae j706 and ce standards. A series 18 hydraulic winches for tow, utility and trailer applications. 3 cubic-inch hydraulic motor that provides pulling capacity up to 18,000 lb. Includes a powerful 7. Wire rope, roller fairlead, and tensioner sold separately. The hardened steel two-stage planetary geartrain with 361 reduction provides fast line speed.
Thern Hydraulic Winch Hydraulic Control Valve (Not Mounted Or Plumbed, No Hoses) (477Hy-Cntrl)
- Helical worm gear power winches. Available with hydraulic as well as pneumatic power. Also available in ac and dc power. 4 inch drum for tight fleet angle. Machine cut gears for long lasting service.
Mile Marker HI-Series Hydraulic Winch – 10,500-lb. Capacity, 24 Volt DC, Model# HI10500-24
- ) 10,500, rope size l x dia. ) 100 x 3/8, volts 24, mounting hardware included yes, gear ratio 6 1, remote length (ft. U. These systems include all necessary hoses, solenoid control valve, remote control, roller fairlead with fasteners, and winch cable. (Ft. The mile marker hi-series hydraulic winch is intended for permanent mounting in the front or rear of a vehicle. ) 12, clutch freespooling, switching method remote control, dimensions l x w x h (in. A. X in. S. ) 15 x 28 x 10, battery leads yes, braking mechanical lock, mounting bolt pattern l x w (in. The solenoid control valve is integrated into the winch body, and therefore always remains in the same location as the winch itself. ) 4 1/2 x 10, rope type galvanized aircraft cable. Line speed (fpm) 31, fairlead type galvanized 4-way roller, gear train planetary, line pull (lbs.
Strongway Air/Hydraulic Shop Press with Gauge and Winch – 50-Ton Capacity
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust. Piston-ram is treated and polished to. High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life. Paint is oil, grease and dirt-resistant for easy cleanup. Heavy-duty h-frame constructed of high-grade steel and built to exacting standards for quality and durability.
Mile Marker Hydraulic Winch Adapter Kit – For All GM, Dodge, International and Chevrolet Models and Hummer H2s, Model# 35-5020-15
- This mile marker hydraulic winch adapter kit for mile marker hi-series hydraulic winches includes everything you need to tap into an existing power-steering system and pull non-stop with your gm, dodge, international, chevrolet or hummer h2. A. U. S. Application adapter kit, compatible with gm, dodge, international, chevrolet, hummer h2s, works with hi-series hydraulic winches.
Mile Marker H-Series Hydraulic Winch – 9000-Lb. Capacity, 12 Volt DC, Model# H9000
- A. X in. ) 9,000, remote length (ft. ) 12, volts 12, clutch freespooling, rope type galvanized aircraft cable, mounting hardware included yes, gear train planetary, battery leads yes, mounting bolt pattern l x w (in. This system is independent from its solenoid control valve to give more freedom in mounting options and vehicle application. Braking mechanical lock, fairlead type galvanized 4-way roller, rope size l x dia. ) 4 1/2 x 10, dimensions l x w x h (in. ) 15 x 28 x 10, gear ratio 6 1, switching method remote control. 6, line pull (lbs. U. The mile marker h-series hydraulic winch can be mounted to the front or rear of the vehicle as a permanent or detachable recovery system. S. (Ft. ) 100 x 3/8, line speed (fpm) 33.
Superwinch (5610A) 10″ Drum Hydraulic Winch with Roller Fairlead
- This roller fairlead features rugged 4-way roller which pulls cables with smooth, low friction action. Superwinch roller fairlead is designed to extend the life of the cables. This roller fairlead is custom designed to be used with hydraulic winch systems. It reduces the wear and tear of the wire rope by eliminating rubbing.
Mile Marker Hydraulic Winch Adapter Kit – For International Truck and Scout Models, Model# 34-5010-18
- S. This mile marker hydraulic winch adapter kit for mile marker series-h hydraulic winches includes everything you need to tap into an existing power-steering system and pull non-stop with your international truck or scout. A. U. Compatible with international truck/scout, amps 2, works with series h-winches, application adapter kit.
Dayton Hydraulic Winch, 8000 lb, 3/8 In, 15 gpm – 3VJ73
- Length of recommended wire rope 155 ft. Hydraulic winch, gear type 2-stage planetary gear, drum rotation bi-directional, clutch type freespooling, no load line speed 96 fpm, full load line speed 60 fpm, overall length 25-11/32″, overall width 7-7/16″, overall height 7-7/16″, gear ratio 6. Pressure 1800 psi, 1st layer line pull 8000 lb. , Standards sae j706. 3/8″, max. Required flow 3 gpm, max. Flow 15 gpm, max. , 1st layer line speed 60 fpm, recommended wire rope dia. 51, min.
Hydraulic Winch, 15, 000 lb, 1/2 In, 15 gpm
- , Standards sae j706. Flow 15 gpm, max. Product details hydraulic winch, gear type 2-stage planetary gear, drum rotation bi-directional, clutch type freespooling, no load line speed 47 fpm, full load line speed 27 fpm, overall length 28 in. , Overall width 11 in. , Overall height 10 in. Required flow 4 gpm, max. , Gear ratio 161, min. 1/2 in. , 1st layer line speed 27 fpm, recommended wire rope dia. , Max. Length of recommended wire rope 153 ft. Pressure 2000 psi, 1st layer line pull 15,000 lb.
Mile Marker 34-5020-35 Hydraulic Winch Adapter
- A. S. U. Amps 2, application adapter kit, compatible with 2005 and newer ford f-250, f-350, f-450 and f-550 trucks and excursion, works with h-series hydraulic winches. This mile marker hydraulic winch adapter kit for mile marker series-h hydraulic winches includes everything you need to tap into an existing power-steering system and pull non-stop with your ford f-250, f-350, f-450, f-550 or excursion.
PIERCE Planetary Hydraulic Winches (10,000 LBS.): 16:1 Ratio, 46 FPM, 15.9 GPM
- Thousands of these are in the field today in many different industries. Mounting bolts are inserted from the bottom of the mounting plates into the winch allowing for custom mounts and efficient insertion into applications. Planetary hydraulic winches feature a load holding cone brake allowing this winch to fill even more needs. The pierce planetary winch incorporates a highly efficient line speed.
Mile Marker HI-Series Hydraulic Winch – 10,500-lb. Capacity, 12 Volt DC, Mode…
- Line pull (lbs. ) 10 x 4 1/2, battery leads yes, gear ratio 6 1, dimensions l x w x h (in. A. (Ft. X in. The mile marker hi-series hydraulic winch is intended for permanent mounting in the front or rear of a vehicle. ) 10,500, line speed (fpm) 31, gear train planetary, switching method remote control, fairlead type galvanized 4-way roller, rope size l x dia. ) 100 x 3/8, rope type galvanized aircraft cable, mounting hardware included yes, clutch freespooling, braking mechanical lock, remote length (ft. ) 12, volts 12, mounting bolt pattern l x w (in. ) 15 x 28 x 10. These systems include all necessary hoses, solenoid control valve, remote control, roller fairlead with fasteners, and winch cable. The solenoid control valve is integrated into the winch body, and therefore always remains in the same location as the winch itself. U. S.
Mile Marker (35-5020-38) Hydraulic Winch Fitting
- Required for hookup of all hi series hydraulic winches. Kit includes 4 metal fittings. 2 year manufacturer warranty. Regulates steering fluid flow when connected to ps pump.
WARN 30285 Series 12 Industrial Hydraulic Winch
- Warn series 12 industrial hydraulic winch is perfect for most tow, utility and trailer applications. Pulling capacity up to 12,000 lb. And hardened steel, two-stage planetary geartrain that provides faster line speeds. A heavy-duty automatic disc brake that provides dependable operation. The wire rope, roller fairlead, and tensioner are sold separately. Meets sae j706 and ce standards.
Thern Hydraulic Winch 2000 Lb � 2.3 Hp � Hydraulic � 4 Gpm At 1000 Psi (Without Controls Or Hoses) (4771Hy)
- Machine cut gears for long lasting service. Helical worm gear power winches. Available with hydraulic as well as pneumatic power. Also available in ac and dc power. 4 inch drum for tight fleet angle.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
