Best and Coolest 20 Spud Wrenches

 

Rudedog Black Drop Forged Spud Wrench 34 #ad

Rudedog Black Drop Forged Spud Wrench 3/4″

Rudedog Black Drop Forged Spud Wrench 3/4″ #ad - This is for a 3/4″ diameter bolt. You bet, we did it and then put a little bling on some of ‘em and had ‘em zinc coated for our black leather. These are made in the us of a by an outfit thats been making spuds nearly a hundred years. What more can i say well, i took a hard look and said lets get these spuds made with our name on it. Our very own spuds from rudedog. Great balance with a good grip. Williams and proto were by far my favorite. Figure out who it is overall length of 3/4 hard spud is 18″. Remember, the head size of an a325 3/4″ structural bolt is 1 1/4″ which this spud has. I’ve tried quite a few spuds in my career, klein, armstrong, martin, proto, williams, and a few others. Long taper, good meat on the head, simple clean design, and great leverage on big iron due to the length.

 

RST Spud Wrench and Sleever Bar Holder Black #ad

RST Spud Wrench and Sleever Bar Holder Black

RST Spud Wrench and Sleever Bar Holder Black #ad - Since 2007 rocking s tack has been known for manufacturing the highest quality tool bags and accessories in the usa. All of the rocking s tack leather products are hand made in miami, ok with the highest quality standards.

 

Adjustable Iron Spud Wrench #ad

Adjustable Iron Spud Wrench

Adjustable Iron Spud Wrench #ad - Adjustable size. Combination spud wrench.

 

Ironton Adjustable Spud Wrench - 16inL Opens to 1 12in #ad

Ironton Adjustable Spud Wrench – 16in.L, Opens to 1 1/2in.

Ironton Adjustable Spud Wrench – 16in.L, Opens to 1 1/2in. #ad - Features chrome vanadium steel construction with black oxide finish to resist corrosion. Tool length (in. ) 16, jaw capacity (in. Tapered end of wrench helps with aligning holes. Adjustable spud wrench is great for iron work. ) 1. The ironton 16in. ) 1 1/2, material type chrome vanadium, finish type black oxide, pieces (qty.

 

SK Hand Tool 38516 Spud Wrench 16-Inch #ad

SK Hand Tool 38516 Spud Wrench, 16-Inch

SK Hand Tool 38516 Spud Wrench, 16-Inch #ad - Designed for use in the iron, building and energy jobsites to help quickly align holes and fasteners. Jaw capacity, 1-1/2″. Made in the usa.

 

Titan TIT216 16 Adjustable Spud Wrench #ad

Titan TIT216 16″ Adjustable Spud Wrench

Titan TIT216 16″ Adjustable Spud Wrench #ad - Opens to a maximum of 1-1/2 inches. Black oxide finish resists corrosion. Chrome vanadium construction.

 

Lee Meyers 4 in 1 Spud Wrench B4001C #ad

Lee Meyers 4 in 1 Spud Wrench, B4001C

Lee Meyers 4 in 1 Spud Wrench, B4001C #ad - 4 in 1 wrench. Adjustable size.

 

Cooper Crescent adjustable spud wrench #ad

Cooper Crescent adjustable spud wrench

Cooper Crescent adjustable spud wrench #ad - Nickel plated to prevent rust. 1/2-inch lug turn and pivot hook. Handles three sizes of hex nuts, 1-3/4-inch (45mm), 2-inch (51mm), 2-1/2-inch (64mm). Stamped steel construction. Even in tight spaces, stubborn slip nuts, locknuts and spuds are no match for this tool.

 

General Tools 191 Spud Wrench #ad

General Tools 191 Spud Wrench

General Tools 191 Spud Wrench #ad - Handles three sizes of hex nuts, 1-3/4-inch (45mm), 2-inch (51mm), 2-1/2-inch (64mm). Nickel plated to prevent rust. Even in tight spaces, stubborn slip nuts, locknuts and spuds are no match for this tool. Stamped steel construction. 1/2-inch lug turn and pivot hook.

 

Shop-Tek 12-Inch Spud Wrench CPWS Sold by Ucostore Only #ad

Shop-Tek 12-Inch Spud Wrench, CPWS, Sold by Ucostore Only

Shop-Tek 12-Inch Spud Wrench, CPWS, Sold by Ucostore Only #ad - Large capacity wrenches that will not mar chrome, brass or other fittings. Maximum actual opening 2-5/8-inches. Jaws made of chrome vanadium steel. Jaws to fit into tight places. The smooth jaws are gentle on finished and visible surfaces.

 

1-18 Iron Worker Spud Wrench Pin Wrench #ad

1-1/8″ Iron Worker Spud Wrench Pin Wrench

1-1/8″ Iron Worker Spud Wrench Pin Wrench #ad - 18″ in length heat treated chrome vanadium steel with phosphate finish. Item weight 1 lbs 26 oz ounces | product dimensions 12 x 325 x 13 inches. Material chrome vanadium steel | finish phosphate. Adjustable from 0 inch to 1-3/8 inch. Continuous tapered handle for aligning bolts.

 

Ratchet PodgerSpud Wrench 1721mm WRPS1721 #ad

Ratchet Podger/Spud Wrench, 17/21mm, #WRPS1721

Ratchet Podger/Spud Wrench, 17/21mm, #WRPS1721 #ad - Ratcheting design to make work with bolts fast and easy. Tapered end to line up bolt holes. Drop forged alloy steel. Hardened and tempered.

 

Stanley Proto J2626 Spud Handle Box Wrench 1-58 #ad

Stanley Proto J2626 Spud Handle Box Wrench 1-5/8″

Stanley Proto J2626 Spud Handle Box Wrench 1-5/8″ #ad - Ideal for heavy construction and field service work. Non-reflective protoblack finish for use where non-plated products are required. 12 point box end allows for fine indexing helping to improve speed and access fits 4, 6 and 12 point fasteners. High leverage handle and strong box end designed to turn stubborn nuts and bolts. Tapered spud end aligns flange holes.

 

RUDEDOG SINGLE TUNNEL LOOP LEATHER SPUD WRENCH HOLDER #ad

RUDEDOG SINGLE TUNNEL LOOP LEATHER SPUD WRENCH HOLDER

RUDEDOG SINGLE TUNNEL LOOP LEATHER SPUD WRENCH HOLDER #ad - This erection wrench scabbard has 1 hole and is great for holding the standard spuds. Only need one spud here is rudedog’s new single spud wrench holder work safe used with all erection wrenches. Constructed of heavy 13, 15 oz black harness leather with a tunnel loop, that can be used with up to a 3″ wide belt. The black harness leather, it is more resistant to wear & water and it will take longer for to stretch out. Made in the usa.

 

Klein Tools 3227 10-Inch Adjustable Spud Wrench11-Inch #ad

Klein Tools 3227 10-Inch Adjustable Spud Wrench,11-Inch

Klein Tools 3227 10-Inch Adjustable Spud Wrench,11-Inch #ad - Klein tools’ dedication to quality and innovation continues with products available for professional tradesmen worldwide.  Today, klein tools is the 1 choice among professional tradesmen. Features a handy lanyard hook for convenience.   we manufacture more than 3,000 tools and accessories, including pliers, cable and bolt cutters, wire strippers, voice-data-video tools and testers, fish tapes, conduit benders, drill bits, insulated tools, gloves and many other high-quality products. The klein 3227 construction wrench with adjustable-head is a convenient and handy size (11-inches total length) with a continuous-taper handle (8-inches) for alignment of bolt and rivet holes. Since 1857, klein tools has manufactured the world’s finest hand tools. This versatile wrench is forged from select alloy steel and fits nuts and bolts up to 1 5/16-inches (33 mm).

 

Stanley Proto J2638 Spud Handle Box Wrench 2-38 #ad

Stanley Proto J2638 Spud Handle Box Wrench 2-3/8″

Stanley Proto J2638 Spud Handle Box Wrench 2-3/8″ #ad - Ideal for heavy construction and field service work. Non-reflective protoblack finish for use where non-plated products are required. High leverage handle and strong box end designed to turn stubborn nuts and bolts. Tapered spud end aligns flange holes. 12 point box end allows for fine indexing helping to improve speed and access fits 4, 6 and 12 point fasteners.

 

DeWalt DWHT70295 16 Spud Wrench DeWalt #ad

DeWalt DWHT70295 16″ Spud Wrench, DeWalt

DeWalt DWHT70295 16″ Spud Wrench, DeWalt #ad - Precision jaw design. 25% more engagement on teeth and worn gear. Knurled handle helps provide extra grip and improved ergonomics. Laser-etched markings for precise adjustment. Toughcoat finish helps prevent chipping.

 

Stanley Proto J2618 Spud Handle Box Wrench 1-18 #ad

Stanley Proto J2618 Spud Handle Box Wrench 1-1/8″

Stanley Proto J2618 Spud Handle Box Wrench 1-1/8″ #ad - Non-reflective protoblack finish for use where non-plated products are required. High leverage handle and strong box end designed to turn stubborn nuts and bolts. Tapered spud end aligns flange holes. Ideal for heavy construction and field service work. 12 point box end allows for fine indexing helping to improve speed and access fits 4, 6 and 12 point fasteners.

 

Rudedog Black Drop Forged Spud Wrench 78 #ad

Rudedog Black Drop Forged Spud Wrench 7/8″

Rudedog Black Drop Forged Spud Wrench 7/8″ #ad - Remember, the head size of an a325 7/8″ structural bolt is 1 7/16″ which this spud has. Long taper, good meat on the head, simple clean design, and great leverage on big iron due to the length. I’ve tried quite a few spuds in my career, klein, armstrong, martin, proto, williams, and a few others. Great balance with a good grip. This is for a 7/8″ diameter bolt. Our very own spuds from rudedog. Williams and proto were by far my favorite. What more can i say well, i took a hard look and said lets get these spuds made with our name on it. You bet, we did it and then put a little bling on some of ‘em and had ‘em zinc coated for our black leather. Figure out who it is overall length of 7/8 hard spud is 20″. These are made in the us of a by an outfit thats been making spuds nearly a hundred years.

 

1-14 Iron Worker Spud Wrench #ad

1-1/4″ Iron Worker Spud Wrench

1-1/4″ Iron Worker Spud Wrench #ad - 18″ in length. Continuous tapered handle for aligning bolts. Heat treated chrome vanadium steel with phosphate finish.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.