Best 24 Proto Open End Wrenches

 

1. Proto

Proto – 1/4″ Drive Metric Crowfoot Wrench 13 mm – Open End (J4713MCF)

The arched surfaces are designed to spread the contact forces over a greater area and they keep the loads off the corners of the fastener which helps prevent fastener rounding Typically used in lower torque applications Broad size range ensures the right tool for the application will be available Antislip design open end asd

Crowfoot wrenches are used in hard to reach restricted access situations where a standard wrench or ratchet cannot reach

 

2. Proto

Stanley Proto J3100A 7 Piece Open End Angle Wrench Set

Double nickel strike for rust resistance and prolonged life Full polish finish provides corrosion resistance and easy to clean surfaces made in usa One end angled to 15 degrees and one to 60 degrees Set includes 38×38 716×716 12×12 916×916 58×58 1116×1116 and 34×34 Heads allow wrench to be used in four different turning angles for greater access in tight work areas

 

3. Proto

Proto – Black Oxide Open-End Wrench – 3/8″ x 7/16″ (J3021B)

15 angle heads Special heattreated alloy steel permits slim shanks for strength and durability Standard open end configuration Unique in the marketplace relevant to our customers work style Nonreflective black oxide finish for use where nonplated products are required

 

4. Proto

Stanley Proto J4930CF Open Ended Crowfoot Wrench 3/8″ Drive 15/16″

Full polish finish provides corrosion resistance and easy to clean surfaces Features proto antislip desgin Tight tolerance for snug fit on fasteners Locking hole helps hold crowfoot in place during use Use with proto locking extensions to help prevent tool loss in awkward locations

 

5. Proto

Proto – 1/4″ Drive Crowfoot Wrench 3/8″ – Open End (J4712CF)

Typically used in lower torque applications Broad size range ensures the right tool for the application will be available The arched surfaces are designed to spread the contact forces over a greater area and they keep the loads off the corners of the fastener which helps prevent fastener rounding Crowfoot wrenches are used in hard to reach restricted access situations where a standard wrench or ratchet cannot reach

Antislip design open end asd

 

6. Proto

Proto – Full Polish Angle Open-End Wrench – 15/16″ (J3130)

15 and 60 angle heads combined with the same size opening on both ends allow wrench to be used in four different turning angles for greater access in tight work areas Full polish finish provides corrosion and easytoclean surfaces Double nickel strike for rust resistance and prolonged life Unique in the marketplace relevant to our customers work style

Proto helped build 1934 fords the golden gate bridge and apollo 11

 

7. Proto

Proto – Satin Open-End Wrench – 20 mm x 22 mm (J32022)

Satin finish provides corrosion resistance and a slip resistant grip Unique in the marketplace relevant to our customers work style Special heattreated alloy steel permits slim shanks for strength and durability Standard open end configuration 15 angle heads

 

8. Proto

Proto – Full Polish Angle Open-End Wrench – 1-1/8″ (J3136)

Full polish finish provides corrosion and easytoclean surfaces Unique in the marketplace relevant to our customers work style Proto helped build 1934 fords the golden gate bridge and apollo 11 15 and 60 angle heads combined with the same size opening on both ends allow wrench to be used in four different turning angles for greater access in tight work areas Double nickel strike for rust resistance and prolonged life

 

9. Proto

Stanley Proto J3144 Angle Open End Wrench 1-3/8″

Corrosion resistance and easy to clean surfaces Double nickel strike for rust resistance and prolonged life Made in usa Angled heads allow wrench to be used in four different turning angles for greater access in tight work areas

 

10. Proto

Stanley Proto J3314 Angle Open End Wrench 7/32″

Angled heads allow wrench to be used in four different turning angles for greater access in tight work areas Made in usa Double nickel strike for rust resistance and prolonged life Corrosion resistance and easy to clean surfaces

 

11. Proto

Stanley Proto J4924CF Open Ended Crowfoot Wrench 3/8″ Drive 3/4″

Use with proto locking extensions to help prevent tool loss in awkward locations Made in usa Features proto antislip desgin Tight tolerance for snug fit on fasteners Full polish finish provides corrosion resistance and easy to clean surfaces Locking hole helps hold crowfoot in place during use

 

12. Proto

Proto – Full Polish Angle Open-End Wrench – 1-5/16″ (J3142)

Proto helped build 1934 fords the golden gate bridge and apollo 11 15 and 60 angle heads combined with the same size opening on both ends allow wrench to be used in four different turning angles for greater access in tight work areas Double nickel strike for rust resistance and prolonged life Unique in the marketplace relevant to our customers work style

Full polish finish provides corrosion and easytoclean surfaces

 

13. Proto

Stanley Proto J5334CF 1/2″ Drive Open-End Crowfoot Wrench, 1-1/16″

Broad size range ensures the right tool for the application will be available Typically used in lower torque applications made in usa The arched surfaces are designed to spread the contact forces over a greater area and they keep the loads off the corners of the fastener Antislip design open end asd

Crowfoot wrenches are used in hard to reach restricted access situations where a standard wrench or ratchet cannot reach

 

14. Proto

Stanley Proto J4708MCF Open Ended Crowfoot Wrench 1/4″ Drive 8mm

Features proto antislip desgin Full polish finish provides corrosion resistance and easy to clean surfaces Tight tolerance for snug fit on fasteners Use with proto locking extensions to help prevent tool loss in awkward locations Made in usa Locking hole helps hold crowfoot in place during use

 

15. Proto

Stanley Proto J3148 Full Polish Angle Open End Wrench, 1-1/2″, 1-pc

Full polish nish provides corrosion and easytoclean surfaces Double nickel strike for rust resistance and prolonged life 1 piece Made in usa 15 and 60 angle heads combined with the same size opening on both ends allow wrench to be used in four different turning angles for greater access in tight work areas

 

16. Proto

Proto – 1/4″ Drive Metric Crowfoot Wrench 14 mm – Open End (J4714MCF)

Broad size range ensures the right tool for the application will be available The arched surfaces are designed to spread the contact forces over a greater area and they keep the loads off the corners of the fastener which helps prevent fastener rounding Crowfoot wrenches are used in hard to reach restricted access situations where a standard wrench or ratchet cannot reach

Typically used in lower torque applications Antislip design open end asd

 

17. Proto

Stanley Proto J4710CF Open Ended Crowfoot Wrench 1/4″ Drive 5/16″

Locking hole helps hold crowfoot in place during use Use with proto locking extensions to help prevent tool loss in awkward locations Made in usa Tight tolerance for snug fit on fasteners Full polish finish provides corrosion resistance and easy to clean surfaces Features proto antislip desgin

 

18. Proto

Stanley Proto J5336CF Open Ended Crowfoot Wrench 1/2″ Drive 1-1/8″

Features proto antislip desgin Tight tolerance for snug fit on fasteners Locking hole helps hold crowfoot in place during use Use with proto locking extensions to help prevent tool loss in awkward locations Made in usa Full polish finish provides corrosion resistance and easy to clean surfaces

 

19. Proto

Proto – Full Polish Angle Open-End Wrench – 9/16″ (J3118)

Full polish finish provides corrosion and easytoclean surfaces Double nickel strike for rust resistance and prolonged life Unique in the marketplace relevant to our customers work style Proto helped build 1934 fords the golden gate bridge and apollo 11 15 and 60 angle heads combined with the same size opening on both ends allow wrench to be used in four different turning angles for greater access in tight work areas

 

20. Proto

Stanley Proto J3124 Angle Open End Wrench 3/4″

Angled heads allow wrench to be used in four different turning angles for greater access in tight work areas Double nickel strike for rust resistance and prolonged life Made in usa Corrosion resistance and easy to clean surfaces

 

21. Proto

Proto – Full Polish Angle Open-End Wrench – 1-5/8″ (J3152)

Full polish finish provides corrosion and easytoclean surfaces 15 and 60 angle heads combined with the same size opening on both ends allow wrench to be used in four different turning angles for greater access in tight work areas Double nickel strike for rust resistance and prolonged life Unique in the marketplace relevant to our customers work style

Proto helped build 1934 fords the golden gate bridge and apollo 11

 

22. Proto

Stanley Proto J3336 Angle Open End Wrench 9/16″

Corrosion resistance and easy to clean surfaces Angled heads allow wrench to be used in four different turning angles for greater access in tight work areas Made in usa Double nickel strike for rust resistance and prolonged life

 

23. Proto

Proto – 1/4″ Drive Crowfoot Wrench 9/16″ – Open End (J4718CF)

Crowfoot wrenches are used in hard to reach restricted access situations where a standard wrench or ratchet cannot reach The arched surfaces are designed to spread the contact forces over a greater area and they keep the loads off the corners of the fastener which helps prevent fastener rounding Typically used in lower torque applications

Broad size range ensures the right tool for the application will be available Antislip design open end asd

 

24. Proto

Proto – Satin Open-End Wrench – 15/16″ x 1″ (J3045)

Standard open end configuration Unique in the marketplace relevant to our customers work style Satin finish provides corrosion resistance and a slip resistant grip 15 angle heads Special heattreated alloy steel permits slim shanks for strength and durability

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.