Best 23 Fluke Voltages

 

Fluke 85RF II High Frequency Probe, 0.25 – 30V rms Voltage Range, 500 MHz Frequency - 30v rms, 200v dc maximum input voltage. Conversion from ac to dc is accomplished on a one-to-one basis includes a range of 025 to 30v rms. 025 to 30v rms voltage range. The probe’s dc output is calibrated to be equivalent to the rms value of a sine wave input. High frequency probe is designed to convert a dc voltmeter with a input impedance of 10 megaohms into a high frequency (100khz to 500 mhz) rf voltmeter.

 

Fluke 1621 Earth Ground Tester, LCD Display, 3.7kV Voltage - Rugged holster and design for tough work environments. Its convenient size, rugged holster, and large, clear lcd display make it an ideal field earth ground tester, for most electrical grounding work environments. With a simple user interface and intuitive functionality, the fluke 1621 is a handy grounding tool for electrical contractors, utility test engineers, and earth ground specialists. Iec/en 61010-1, 600 v cat ii, pollution degree 2. Compact and easy to use, the fluke 1621 is the first line of defense in detecting reliable ground connections. Clearly read and record data with a large, backlit display. Temperature coefficient +/-0. The unit features basic ground testing methods including 3-pole fall-of-potential as well as 2-pole ground resistance tests. Portable size allows for easy transportation. 1 percent of range per degree kelvin. Instantly be alerted to measurements outside of your set limit, when you use the adjustable limit setting.

 

Fluke 707 Loop Calibrator with Quick Click Knob, 28V Voltage, 24mA Current, 0.015 percent Accuracy - Selectable step or ramp outputs 24v loop supply with ma measure, including 250o hart resistor. One handed user interface with “quick click” detented knob ma sourcing, simulation and measurement. 0-28 vdc measurement to check loop voltage easy battery exchange without opening the case compact case with separate protective holster. 0015 percent accuracy and 0001 ma resolution simultaneous ma and percent of span display. 3 year warranty.

 

Fluke TP175 TwistGuard Test Probe, 1000V Voltage, 10A Current, 2mm Tip Diameter - Ul listing. Adjustable tip length, allowing increased safety and precision. Compatible with the tl22x series, tl238 and tl27 test leads. Patented twistguard extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements. Ratings cat ii 1000v, cat iii 1000v, cat iv 600v, 10a maximum, pollution degree 2. Probes always show correct category rating for tip being used. Environmental ratings -20 to 55 degree c (-4 to 131 degree f), altitude 2000m (6562′). 1 year warranty.

 

Fluke BP190 Rechargeable NiMH Battery Pack, 3500 mAh Capacity, 7.2V Voltage, For ScopeMeter 190 and 190C series - 2v nominal voltage. 7. 3,500 mah capacity. Designed for use with the fluke scopemeter 190 and 190c series, the fluke bp190 rechargeable nimh battery pack, this set of nimh batteries has to be charged in the instrument.

 

Fluke TL930 Patch Cord Set, 60V DC Voltage, 8A Current, 24″ Length - 24″ (61cm) long pvc insulated leads. One year warranty. 1 pair (red, black) multi stacking 4mm banana plug patch cords. Nickel plated banana plugs. 30v rms or 60v dc, 8a.

 

Fluke FLK-V3000 FC Wireless AC Voltage Module - Ac voltage meter measures up to 1000v true-rms ac and can wirelessly relay measurements to fluke connect enabled master units. Comes with tl224 test leads, ac285 alligator clips, and a magnetic hanging strap. Works as a standalone meter or with the following (sold separately) fluke 3000 fc dmm, fluke ti200/300/400 infrared cameras, pc via a fluke pc3000 adapter, and fluke connect mobile app.

 

Fluke 1555/KIT Insulation Resistance Tester Kit, 2 Teraohms Resistance , 10kV Voltage - High-voltage digital megohmmeter has preset and adjustable test voltages for measuring insulation resistance, and also measures leakage current to 2 milliamperes (ma) and capacitance to 20 microfarads. Meets en safety standards 61010-1 and 61557, and is rated for cat iv installations to 600v and cat iii installations to 1,000v. Performs timed tests up to 99 minutes, and stores up to 99 test results which can be uploaded to a pc. Automatically calculates pi and dar for a detailed indication of insulation condition. Measures voltage to 600v and signals when a voltage greater than 30v is detected.

 

Fluke 80I-110S AC/DC Current Probe, 600V AC rms Voltage, 70A AC/100A DC Current - Compitable with other voltage measurement device with bnc input connectors or if using a meter convert the banana plugs to a bnc connector using the adapter. The probe is shielded for high noise immunity, to prevent unwanted noise when troubleshooting around noise generating devices like adjustable speed motor drives and ignition systems. Specially designed built-in safety features such as the 600 v rms rating at the input jaws, output cable and bnc connector enhance work safety in industrial and commercial power distribution systems. Compatible with any fluke scopemeter test tool, power harmonics analyzer, oscilloscope, multimeter. Designed to provide you with safe, high accuracy measurements for a wide range of applications.

 

Fluke BP980 10 Piece Double Banana Plug Kit, 30V rms, 60V DC Voltage, 15A Current - 5 pair (red, black) of double 4 mm banana plugs. One year warranty. Each plug has 3. Brass plugs/jack, beryllium copper springs. Double banana plug kit. 30v rms or 60v dc, 15a. 1mm holes for mounting wires and components.

 

Fluke TL935 Patch Cord Kit, 60V DC Voltage, 8A Current - 3 sets (red and black pairs) of multi stacking 4mm banana plug patch cords. 60cm, 90cm, 120cm long pvc insulated leads. One year warranty. Nickel plated banana plugs. 30v rms or 60v dc, 8a.

 

Fluke BHT190 3 Piece Bus Health Test Break-Out Adapter Set, 30V rms Voltage, For Industrial Bus Connections - Maximum voltage 30v rms, 42v peak, between any connection and between connections and ground. Break-out adapter rj-45, female-to-female with patchcable (patchcable not shown on photo). Set of break-out adapters for the three most common industrial bus connection systems m12, db-9 and rj-45. Break-out adapter db-9, male-to-female. Break-out adapter m12, with cables, male-to-female.

 

Fluke I310S AC/DC Current Probe, +/-100mA Resolution, 300V AC/ DC Voltage, 450A DC, 300A AC rms Current - Output sensitivity 10 mv/a (40 a) to 1 mv/a (400 a). It may be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement. Current probe is based on hall effect technology. Use in measurement of both dc and ac current. Load impedance greater than 10 k ohms and less than or equal to 100 pf.

 

Fluke TL950 2 Piece Mini-Pincer Test Lead Set, 30V rms/60V DC Voltage, 5A Current, 90cm Long - Mini-pincers open to 2. 1 pair (red, black) of test leads with multi-stacking 4mm banana plugs and mini-pincer. 1 year warranty. 3mm. 30v rms or 60v dc, 5a. 90cm long pvc insulated leads.

 

Fluke CNX v3000 AC Wireless Voltage Kit - True-rms ac and dc voltage measurements to 1000v. Make measurements on your cnx 3000 while simultaneously viewing true-rms ac voltage measurements on your remote cnx v300. ±1% accuracy to 500 hz, ± 2% accuracy to 1 khz. Continuity, resistance, diode test, capacitance, and frequency measurements. True-rms ac and dc current with 001 ma resolution. Min/max recording. True-rms ac voltage measurements to 1000v. Continuity, resistance, diode test, capacitance and frequency measurements. Memory recording up to 65,000 readings. True-rms ac and dc voltage measurements to 1000v.

 

Fluke TL1550EXT 3 Piece Extended Test Lead Set with Alligator Clips, 5000V DC Voltage, 20A Current, 300″ Cable Length - Test leads extend to 25′. 3 alligator clips (red, black, green). Maximum jaw opening 26mm (1″). Cat ii 1000 v, cat iii 600 v, 20 amps (alligator clips). Replacement test lead set for the fluke 1550b/1550c/1555 megaohmmeter. 3 test leads (red, black, green) connected to low-leakage probes. Cat ii 1000 v, cat iii 600 v, 5kv dc max (probes).

 

Fluke BC430 Line Voltage Adapter/Battery Charger - Provides power cord operation and charging for fluke 430 series power quality analyzers. Equipped with a male receptacle plug that must be connected to a line cord/adapter appropriate for local use. Mains (line voltage) switchable 115 v ± 15% or 230 v ± 15%. (Line cord/adapter not included).

 

Fluke VPS101 5 Piece Double Insulated Voltage Probe Set, 1.2m Cable Length, 1x Attenuation, Black, For 190 Series ScopeMeter - Input capacitance 42 pf plus input capacitance of instrument. Bandwidth 30 mhz. Probe set includes 300v cat iii rated, 11 voltage probe, hook clip for probe tip, ground lead with mini alligator, insulation sleeve, 30v cat ii rated ground spring for probe tip. 1 year warranty. Input resistance 1 megaohms.

 

Fluke LVD2/CT Volt Light with Counter Top Display, 90 to 600V AC Voltage - Aaa battery included. Non-contact ac voltage detector and led flashlight combined into one easy to use pen-style design. The lvd2 includes dual sensitivity turning blue 1 to 5 (254cm to 127cm) from the source and red when at the source. The lvd2 is a cat iv 600 v rated non-contact detector that is suitable for commercial and industrial applications. Led light with 100000 hour life.

 

Fluke 717 Pressure Calibrator with Clear 5 Digit LCD Display, 9V Battery, 30V Voltage, 24mA DC Current, -12 to 15 psi Pressure - 001 ma resolution, 0. 1/8 npt female pressure fitting. This calibrator is compact, lightweight, easy to carry and easy to use. Measures 7-119/128″ length by 3-55/64″ width by 2-7/128″ height. 11992. Range -12 to 15 psi (-850 mbar to 1 bar, -85 to 103 kpa). Clear 5 digit lcd display. 015 percent + 2 counts accuracy. 1010. Current 0 to 24 ma (-25 to 125 percent) range, 0. New switch test. Battery type single 9v battery ansi/neda 1604a or iec 6lr619v alkaline. 015 percent accuracy and 0. Humidity (without condensation) 95 percent (10 to 30 degree c), 75 percent (30 to 40 degree c), 45 percent (40 to 50 degree c), 35 percent (50 to 55 degree c). Compatible with non-corrosive gases and liquids. Pressure calibrator delivers outstanding performance, durability and reliability. 001 ma resolution, while sourcing 24v loop power. Loop power 24v dc range, +/- 10 percent accuracy. Measure ma with 0. Zero, min, max, and hold functions. Holster features test lead storage. Safety csa c22. Calibrate p/i instruments with simultaneous pressure and current measurement. 3000m maximum operating altitude. Shock and vibration random, 2g, 5-500 hz 1m drop test. This model includes protective yellow holster with test lead storage, instructions sheet (14 languages), single 9v alkaline battery, test leads and alligator clips, nist- traceable calibration report and data. Compatible with toolpack magnetic hanging system. 3 years warranty. -10 to 55 degree c operating temperature. Long lasting battery life. 2 no. Pressure switch test function captures set, reset and deadband values of a pressure switch. This is emi tolerant, dust and splash resistant, and features a removable battery door for quick battery changes. Error percent calculation of ma measurements for quick pass-fail decisions. -40 to 60 degree c storage temperature.

 

Fluke 3 Phase Voltage Test Lead Cable Assembly, Serial Interface - 1 year warranty. Test probe adapter set. Set of push-on adapters for tl71 and tl75 test probes. Cat iii 300v, 3a rating. Ic test adapters, extended probe tips, medium alligator clips (maximum opening 76mm).

 

Fluke TP920 Test Probe Adapter Set, 300V Voltage, 3A Current - 1 year warranty. Test probe adapter set. Ic test adapters, extended probe tips, medium alligator clips (maximum opening 76mm). Cat iii 300v, 3a rating. Set of push-on adapters for tl71 and tl75 test probes.

 

Fluke AC285-FTP Alligator Clips and Adaptors, 1000V Voltage, 10A Current, Red and Black, For FTP-1 or FTPL-1 Fused Test Probes - 75″) nut. Multi-purpose tooth pattern grips anything from fine gauge wire to a 20mm (0. Suregrip has rubber overmolded surfaces for a firm reliable grip. Includes model a pair of red and black extra large alligator clips plus adaptors to securely attach the alligator clips to fluke fused test probes ftp-1, ftpl-1, ftp and ftpl. Conforms to safety standard iec61010-0312002 +a12008, cat iii 1000v, cat iv 600v. 10a maximum, pollution degree 2, 2000 m altitude. Strong, nickel-plated steel jaws for a tight hold. Operating temperature -4 to 131 degree f, 95 percent rh. One-year warranty.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.