Best 21 Pulley Holders

 

Assenmacher Specialty Subaru Camshaft Pulley Holder SU200T

Assenmacher Specialty Subaru Camshaft Pulley Holder SU200T

Assenmacher Specialty Subaru Camshaft Pulley Holder SU200T - 45mm hex. Shallow 1″ overall depth fits into tight engine co. Hexagonal shaped tool matches with hole in crankshaft. Oem code 07mab dy30100. Prevents engine movement when removing and install.

 

CTA Tools 7610 Camshaft Pulley Holder Subaru

CTA Tools 7610 Camshaft Pulley Holder (Subaru)

CTA Tools 7610 Camshaft Pulley Holder (Subaru) - Vehicles. Comfort grip. Applications impreza sohc engine (1993-2012), forester sohc engine (1999-2012), legacy sohc engine (1989-2012), baja sohc engine (2004-2006), svx sohc engine (1992-1997), saab 9-2x linear sohc engine (2005-2006), similar to subaru oem #499207100. C. California prop 65, warning, this product contains chemicals known to the state of california to cause cancer, birth defects or other reproductive harm. Holds camshaft pulley of subaru 2200 c.

 

Ford Diesel 4 Pin Fan Clutch Pulley Holder

Ford Diesel 4 Pin Fan Clutch Pulley Holder

Ford Diesel 4 Pin Fan Clutch Pulley Holder - Overall depth, front to back -18 inches. Sch10900 features -fan clutch pulley holder. -One piece design versus factory 2 piece design for less cost. -Super duty pins for extra strength. Dimensions overall height, top to bottom -1 inches. Overall width, side to side -4 inches. Generic dimensions -1” h x 4” w x 18” d. -Heat treated high quality steel.

 

Benz M271 Crankshaft Harmonic Balancer Pulley Holder

Benz M271 Crankshaft Harmonic Balancer Pulley Holder

Benz M271 Crankshaft Harmonic Balancer Pulley Holder - Professional grade 50mm socket (with offset design) for removing/installing many acura and honda engine crank bolts. Use with square socket driver> 1/2″ square drive use with breaker bar. This socket is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt. For removal and replacement of the crankshaft bolt oem no a 271 030 00 03 application benz m271.

 

OTC 4803 Universal Pulley Holder Locking Pliers Set

OTC 4803 Universal Pulley Holder Locking Pliers Set

OTC 4803 Universal Pulley Holder Locking Pliers Set - One year limited warranty. Adjustable locking pliers. Used on applications with slots or holes with the addition of the interchangeable 5, 6, 7, 10 and 16 millimeters pin sets. Complete with metal carry case. Holds pulleys, clutch hubs, flywheels, gears and sprockets with internal or external teeth up to 4 inches diameter.

 

ZXTDR Flywheel Pulley Holder Tool for Pit Dirt Bikes

ZXTDR Flywheel Pulley Holder Tool for Pit Dirt Bikes

ZXTDR Flywheel Pulley Holder Tool for Pit Dirt Bikes - This is not a puller, it is used to hold the flywheel on the crankshaft. Features two sizes of pin on either side of the tool for different sizes of flywheel slots. Works on honda pit bike clones and genuine honda engines. Made of hardened metal for long life and high performance. Adjustable tool for holding flywheels while removing the lock nut.

 

Universal Motorcylce Bike Flywheel  Clutch Pulley Holder

Universal Motorcylce Bike Flywheel / Clutch Pulley Holder

Universal Motorcylce Bike Flywheel / Clutch Pulley Holder - Pvc dipped handle gives added comfort. Universal pulley holder suitable for flywheel and clutch pulleys on a large range of motorcycles. Adjusting screw allows tool to be locked at the required size.

 

CTA Tools 7625 Camshaft Pulley Holder Subaru

CTA Tools 7625 Camshaft Pulley Holder (Subaru)

CTA Tools 7625 Camshaft Pulley Holder (Subaru) - Similar to subaru oem #499977500. 3-point design to hold the avics intake camshaft pulleys when removing or installing the central bolt. All metal construction. Avoid damage to central pulley. Applications include
impreza wrx sti (2004 & up)
impreza wrx (2006 & up)
forester xt (2004-2011)
legacy gt (2005-2010)
outback xt (2005-2010)
baja turbo (2004-2006)
saab 9-2x aero (2006).

 

Pit Posse PP2332 Flywheel Pulley Holder Motorcycle Tool

Pit Posse PP2332 Flywheel Pulley Holder Motorcycle Tool.

Pit Posse PP2332 Flywheel Pulley Holder Motorcycle Tool. - Extremely heavy duty construction. This tool is designed to hold the crankshaft pulley stationary while loosening or tightening the center (crankshaft) bolt this is necessary to prevent damage to the vibration dampening element the rubber ring that separates the outer and inner portions of the pulley. •Subaru forester (2011 & up) •wrx (2014 & up) •impreza (2013 & up) •impreza xv 20 (2012 & up) •tribeca 36 (2008-2012). The locating pins are 14mm in diameter on a 75mm bolt-circle.

 

OEMTOOLS 27281 Universal Pulley and Fan Clutch Holder

OEMTOOLS 27281 Universal Pulley and Fan Clutch Holder

OEMTOOLS 27281 Universal Pulley and Fan Clutch Holder - Fits many different fan clutches, cam and crank pulleys with slots or holes. Enables technician to easily hold the pulley when tightening or loosening retaining bolts,. Adjustable diameter 1-1/2″, 8-5/8″. Four different size step pins 6-10mm, 8-11mm, 10-12mm, 11-16mm.

 

CAMSHAFT PULLEY HOLDERSUBARU BY JTC 4823

CAMSHAFT PULLEY HOLDER(SUBARU) BY JTC 4823

CAMSHAFT PULLEY HOLDER(SUBARU) BY JTC 4823 - C. • To use for fixing timing belt and easy to remove or install it. • Front part with 3 points which could fix the belt of forester. • Applicable subaru forester 2500 c.

 

Tool connection 3729 Crank Pulley Holder  Laser

Tool connection 3729 Crank Pulley Holder ( Laser )

Tool connection 3729 Crank Pulley Holder ( Laser ) - 45mm hex. Shallow 1″ overall depth fits into tight engine co. Prevents engine movement when removing and install. Oem code 07mab dy30100. Hexagonal shaped tool matches with hole in crankshaft.

 

CAMSHAFT PULLEY HOLDER SUBARU JTC 4026

CAMSHAFT PULLEY HOLDER (SUBARU) JTC 4026

CAMSHAFT PULLEY HOLDER (SUBARU) JTC 4026 - Applicable:subaru ej25. Special internal two curve designed for holding the pulley. To use for fixing timing belt and easy to remove or install it.

 

CTA Tools 7620 Crankshaft Pulley Holder Subaru

CTA Tools 7620 Crankshaft Pulley Holder (Subaru)

CTA Tools 7620 Crankshaft Pulley Holder (Subaru) - 12-point design to hold the camshaft pulley while removing and/or installing central bolt. Avoid damaging pulley similar to subaru oem #499207400. California prop 65, warning, this product contains chemicals known to the state of california to cause cancer, birth defects or other reproductive harm.

 

Clutch Fan Tool Set US Universal Pulley Holder Spread Interchangeable Pin - Skroutz

Clutch Fan Tool Set US Universal Pulley Holder Spread Interchangeable Pin – Skroutz

Clutch Fan Tool Set US Universal Pulley Holder Spread Interchangeable Pin – Skroutz - It comes only with skroutz unique e-book. Brilliant carbon steel construction pulley fan clutch tool. Intended to rotate or restrain the camshaft pulley, install or remove fan clutch. Long handle hold camshaft pulley while tightening, loosening or retaining bolts easily. Carbon steel handle wrapped with plastic protects your hands.

 

OTC 4802 Universal Pulley Holder Locking Pliers Set

OTC 4802 Universal Pulley Holder Locking Pliers Set

OTC 4802 Universal Pulley Holder Locking Pliers Set - They can also be used on applications with slots or holes with the 5/16 inch pins. These adjustable locking pliers can be used to hold pulleys, clutch hubs, flywheels, gears, and sprockets with internal or external teeth up to 4 inches diameter.

 

Tusk FlywheelPulley Holder

Tusk Flywheel/Pulley Holder

Tusk Flywheel/Pulley Holder - Two adjustment holes in the belt make it easy to adjust to different sizes. The tusk flywheel/pulley holder is desined to hold a 60mm-120mm flywheel to make the removal and installation of your flywheel simple and easy.

 

BmwSprinter Van Offset Pulley Holder

Bmw/Sprinter Van Offset Pulley Holder

Bmw/Sprinter Van Offset Pulley Holder - Features two sizes of pin on either side of the tool for different sizes of flywheel slots. Works on honda pit bike clones and genuine honda engines. Adjustable tool for holding flywheels while removing the lock nut. Bmw/sprinter van offset pulley holder. Made of hardened metal for long life and high performance.

 

TOYOTA LEXUS CRANKSHAFT PULLEY HOLDER BY JTC 4013

TOYOTA, LEXUS CRANKSHAFT PULLEY HOLDER BY JTC 4013

TOYOTA, LEXUS CRANKSHAFT PULLEY HOLDER BY JTC 4013 - 25) o extend operation needs ½” dr. O this tool is designed to hold the crankshaft pulley while loosening or tightening the center screw o to tighten crankshaft pulley by 2 screws (m8 x 1. Wrench o applicable toyota, lexus.

 

Motorcycle  Bike Clutch Flywheel Universal Pulley Sprocket Holder Tool AT637

Motorcycle / Bike Clutch Flywheel Universal Pulley Sprocket Holder Tool AT637

Motorcycle / Bike Clutch Flywheel Universal Pulley Sprocket Holder Tool AT637 - Easy access to fan clutch nut on 1984 through 1993 ford 49l e and f series truck engines, 1984 through 1987 ford. 46l modular engines, 28l engines, 1988 to current 29 to 30l engines and 1990 to current 40l engines. 1988 to current 29-liter to 30-liter engines, 1990 to current 40-liter engines. Check service manual for torque specifications and thread direction.

 

Go2buy Pulley Holder Adjustable Wrench Fan Clutch Tools Equipment Hand Tools

Go2buy Pulley Holder/ Adjustable Wrench, Fan Clutch Tools Equipment Hand Tools

Go2buy Pulley Holder/ Adjustable Wrench, Fan Clutch Tools Equipment Hand Tools - Interchangeable step pins with 4 different sizes. Long handle hold camshaft pulley while tightening, loosening or retaining bolts with ease. Carbon steel handle wrapped with plastic protects your hands. Designed to rotate or restrain the camshaft pulley, install or remove fan clutch. Together with carry case for storage.