3″ DAMO Wet Diamond Polishing Pad Grit 3000 for Granite/Concrete/Marble Countertop/Floor Polish
- Set the speed at 3,000-4,000rpm and start polishing process. (3) moving two passes across and one pass up and down is a good technique. When the water is consumed, the process is complete. Repeat as necessary to improve the luster and achieve the mirror effect result. Connect a back holder to the polisher, and attach a damo wet pad of grit 50 to the back holder. Wet the material once again with a small amount of water, continue polishing with grit 3000 until you achieve the high gloss and luster on the material. Wet the workpiece and run the buff pad semi-wet with very low water. Do not skip. (6) if you want to achieve the best polishing results on granite, use buff pad as the last step. (5) polish from grit 50 to grit 3000 respectively. Wet the surface with a small amount of water. (2) wear rubber gloves/boots, an apron and safety glasses first. You only need to keep the surface slightly wet. Repeat the same process until grit 800. (1) widely used for wet polishing of granite, marble, concrete, engineered stone, terrazzo, porcelain and quartz. Make sure all prior scratches are removed before moving onto the next grit. Control the amount of water used when polishing. (4) turn off the water supply on grit 1500 and 3000. Polishing with grit 1500 until the area you are working on becomes dry.
5″ WET Diamond Polishing pad – 7 piece set – 50-3000 grit
- Recommended working speed 2500 rpm. High quality wet diamond polishing pad set for granite. Designed for wet use only.
4″ WET Diamond Polishing pad, 400 grit
- Recommended working speed 1000, 1500 rpm. Wet use only. High quality diamond polishing pads for granite.
4″ Ultra Thick Wet Diamond Polishing Pads Grit 50 for Granite / Marble / Concrete
- Grit #10000 for ultra fine polishing to a final mirror finish. Tested 5000 rpm, use higher speed at your own risk. Usps shipping to your addresses, po, apo, fpo boxes within a week other shipping services are available on request. High quality diamond polishing pads for w polishing of granite and concrete. Hard white resin and high diamond content for long life and fast cutting and won’t stain your surface.
4″ STADEA Wet Diamond Polishing Pads Flexible Velcro Backed 3 MM High 7 Pieces Set/Custom Set
- 4″ diameter wet pads full set or custom grit set. Flexible velcro backer. Set of 1 piece each of grit 50, 100, 200, 400, 800, 1500, 3000 pad. Granite, marble, concrete, cultured stone, other stone, tiles etc. Optimal rpm 2000.
STADEA Premium Grade Wet 5″ Diamond Polishing Pads Set For CONCRETE Polish
- Velcro backed polishing pads for easy connect and removal, with water hole in center, color coded velcro backers to easily identify polishing pads grit. Set of 5 wet diamond polishing pads, 1 piece each for grit 50, 100, 200, 400, 800. Stadea wet diamond polishing pads series standard a, 5 inch diamond impregnated resin bonded pads designed for wet concrete polishing, wet marble polishing, wet travertine terrazzo polishing, wet granite polishing. Works great with concrete stone wet polishers, 22 mm thick polishing pads, maximum rpm 4500, optimal rpm 2200 available in individual grits or sets. Outstanding shine for concrete polishing, ideal for concrete countertop polishing, concrete floor polishing good shine for granite edge polishing, marble terrazzo travertine and other stone flat or contoured surface polishing.
STADEA 5″ Wet Diamond Polishing Pads Set for Concrete polishing + Rubber Backer (M14 Threaded)
- Outstanding shine for concrete polishing, ideal for concrete countertop polishing, concrete floor polishing good shine for granite edge polishing, marble terrazzo travertine and other stone flat or contoured surface polishing. Works great with concrete stone wet polishers, 22 mm thick polishing pads, maximum rpm 4500, optimal rpm 2200 available in individual grits or sets. Stadea wet diamond polishing pads series standard a, 5 inch diamond impregnated resin bonded pads designed for wet concrete polishing, wet marble polishing, wet travertine terrazzo polishing, wet granite polishing. Set of 5 wet diamond polishing pads, 1 piece each for grit 50, 100, 200, 400, 800 and m14 threaded backing pad. Velcro backed polishing pads for easy connect and removal, with water hole in center, color coded velcro backers to easily identify polishing pads grit.
Specialty Diamond 7WSET 7″ Wet Diamond Polishing Pad Set – (50, 100, 300, 400, 600, 1000, 3500 Grit) – (78Wetset)
- Specialty diamond 7wset 7″ wet diamond polishing pad set, (50, 100, 300, 400, 600, 1000, 3500 grit), (78wetset).
Toolocity CPP05P5 5-Inch Con-Shine Dry/Wet Diamond Polishing Pad 5-Step Number 5
- 5″ con-shine dry/wet diamond polishing pad 5-step #5. Con-shine diamond polishing pads are formulated for polishing concrete counter tops. Color of these dry/wet diamond polishing pads are designed to avoid. 5 steps allow fabricators to save time and cost.
4″ WET Diamond Polishing pad – 100 grit
- Designed for wet use only. High quality wet diamond polishing pad for granite. Recommended working speed 1000, 1500 rpm.
STADEA Premium Grade Wet 5″ Diamond Polishing Pads Set For GRANITE MARBLE STONE Polish
- Velcro backed polishing pads for easy connect and removal, with water hole in center, color coded velcro backers to easily identify polishing pads grit. Works great with concrete stone wet polishers, 22 mm thick polishing pads, maximum rpm 4500, optimal rpm 2200 available in individual grits or sets. Set of 7 wet diamond polishing pads, 1 piece each for grit 50, 100, 200, 400, 800, 1500, 3000. Stadea wet diamond polishing pads series standard a, 5 inch diamond impregnated resin bonded pads designed for wet concrete polishing, wet marble polishing, wet travertine terrazzo polishing, wet granite polishing.
Toolocity CPP05P4 5-Inch Con-Shine Dry/Wet Diamond Polishing Pad 5-Step Number 4
- 5 steps allow fabricators to save time and cost. Color of these dry/wet diamond polishing pads are designed to avoid. Con-shine diamond polishing pads are formulated for polishing concrete counter tops. 5″ con-shine dry/wet diamond polishing pad 5-step #4.
3″ DAMO Wet Diamond Polishing Pad Grit 800 for Granite/Concrete/Marble Countertop/Floor Polish
- (5) polish from grit 50 to grit 3000 respectively. Polishing with grit 1500 until the area you are working on becomes dry. Wet the workpiece and run the buff pad semi-wet with very low water. You only need to keep the surface slightly wet. (4) turn off the water supply on grit 1500 and 3000. Connect a back holder to the polisher, and attach a damo wet pad of grit 50 to the back holder. (2) wear rubber gloves/boots, an apron and safety glasses first. (6) if you want to achieve the best polishing results on granite, use buff pad as the last step. When the water is consumed, the process is complete. Control the amount of water used when polishing. Set the speed at 3,000-4,000rpm and start polishing process. Do not skip. Wet the material once again with a small amount of water, continue polishing with grit 3000 until you achieve the high gloss and luster on the material. Repeat as necessary to improve the luster and achieve the mirror effect result. (3) moving two passes across and one pass up and down is a good technique. Wet the surface with a small amount of water. Make sure all prior scratches are removed before moving onto the next grit. Repeat the same process until grit 800. (1) widely used for wet polishing of granite, marble, concrete, engineered stone, terrazzo, porcelain and quartz.
STADEA 4″ Wet Diamond Polishing Pads Set for Concrete Polishing, M14 Rubber velcro Backer
- Outstanding shine for concrete polishing, ideal for concrete countertop polishing, concrete floor polishing good shine for granite edge polishing, marble terrazzo travertine and other stone flat or contoured surface polishing. Set of 5 wet diamond polishing pads, 1 piece each for grit 50, 100, 200, 400, 800 and one m14 threaded backing pad. Stadea wet diamond polishing pads series standard a, 4 inch diamond impregnated resin bonded pads designed for wet concrete polishing, wet marble polishing, wet travertine terrazzo polishing, wet granite polishing. Velcro backed polishing pads for easy connect and removal, with water hole in center, color coded velcro backers to easily identify polishing pads grit. Works great with concrete stone wet polishers, 22 mm thick polishing pads, maximum rpm 4500, optimal rpm 2200 available in individual grits or sets.
7pcs Wet Diamond Polishing Pads Set for Granite Marble Concrete Terrazzo Engineered Stone Polishing 4inch/100mm
- Adopting special binding agent, strong grinding force and smoothness, fast polishing speed. Using diamond as abrasion and combined with composite material, durable and long service life granularity 50/100/300/500/800/1500/3000. Mainly used for stone, granite, glass, marble, ceramics, crystal, ceramic stone, concrete, terrazzo , travertine, and slate etc. This set is great for rough grinding, smooth grinding, fine grinding, polishing, four stages in the processing of stone, good polishing effect. High efficiency, there is no color or scratches left on stone after polishing, good smoothness.
5″ WET Diamond Polishing pad – 100 grit
- High quality diamond wet polishing pad for granite. Designed for wet use only. Recommended working speed 2500 rpm.
3″ DAMO Wet Diamond Polishing Pad Grit 1500 for Granite/Concrete/Marble Countertop/Floor Polish
- (4) turn off the water supply on grit 1500 and 3000. (1) widely used for wet polishing of granite, marble, concrete, engineered stone, terrazzo, porcelain and quartz. (3) moving two passes across and one pass up and down is a good technique. Repeat the same process until grit 800. Repeat as necessary to improve the luster and achieve the mirror effect result. (5) polish from grit 50 to grit 3000 respectively. Connect a back holder to the polisher, and attach a damo wet pad of grit 50 to the back holder. You only need to keep the surface slightly wet. Make sure all prior scratches are removed before moving onto the next grit. Wet the workpiece and run the buff pad semi-wet with very low water. Set the speed at 3,000-4,000rpm and start polishing process. Wet the surface with a small amount of water. Polishing with grit 1500 until the area you are working on becomes dry. Control the amount of water used when polishing. Wet the material once again with a small amount of water, continue polishing with grit 3000 until you achieve the high gloss and luster on the material. When the water is consumed, the process is complete. (6) if you want to achieve the best polishing results on granite, use buff pad as the last step. Do not skip. (2) wear rubber gloves/boots, an apron and safety glasses first.
4″ Ultra Thick Wet Diamond Polishing Pad Grit 800 for Granite / Marble / Concrete
- Stadea wet diamond polishing pads series standard a, 4 inch diamond impregnated resin bonded pads designed for wet concrete polishing, wet marble polishing, wet travertine terrazzo polishing, wet granite polishing. Velcro backed polishing pads for easy connect and removal, with water hole in center, color coded velcro backers to easily identify polishing pads grit. Set of 5 wet diamond polishing pads, 1 piece each for grit 50, 100, 200, 400, 800 and one m14 threaded backing pad. Outstanding shine for concrete polishing, ideal for concrete countertop polishing, concrete floor polishing good shine for granite edge polishing, marble terrazzo travertine and other stone flat or contoured surface polishing. Works great with concrete stone wet polishers, 22 mm thick polishing pads, maximum rpm 4500, optimal rpm 2200 available in individual grits or sets.
4″ WET Diamond Polishing pad – 1500 grit
- Designed for wet use only. High quality wet diamond polishing pads for granite. Recommended working speed 1000, 1500 rpm.
4″ Ultra Thick Wet Diamond Polishing Pad Grit 3000 for Granite / Marble / Concrete
- A complete set usually comes with grit #50, #100, #200, #400, #800, #1500 #3000 and a buff pad. When attached to a rigid back holder, they can be used to polish flat surfaces. Black buff is for dark stones and white buff is for light color stones. The velcro backing can be attached to back holders easily and allows for a fast switching between pads. The straight or curved slots on the surface make the pads flexible. Polish from #50 to #3000 in order and use buff pad as the last step to achieve the best polishing results. We damo diamond tools, llc holds exclusive distribution to damo trademark products as you can see clearly marked from the picture on the product listing. Different back colors with grit numbers burned into velcro makes it easy to identify grit sizes. Damo 4” wet polishing pads are made with top quality synthetic diamonds and resin. When attached to a semi-rigid or super flex back holder, they can be used to polish contoured areas.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
