Crescent CDS95 3/4″ Drive 12 Point Standard Socket 1-1/8″
- Nickel chrome plated for long lasting protection. Surface drive technology reduces fastener rounding. Chrome vanadium alloy steel for long lasting durability.
SK Hand Tool 48227 6 Point 1/2-Inch Drive Standard Socket, 27mm, Chrome
- High polish superkrome plating results in a jewelry-like finish providing long life and maximum corrosion resistance. Suregrip drive design drives the side of the fastener, not the corner, to provide increased strength. And avoid rounding of rusted or damaged fasteners.
Grey Pneumatic (907MG) 1/4″ Drive x 7mm Magnetic Standard Socket
- Hard stamped markings to prevent loss of identification over time. Direct torque technology helps prevent rounding of fasteners. Knurled control ring for added grip when handling the socket. Full polish chrome vanadium finish helps prevent chipping and flaking under toughest environments. Chamfered open end for easier engagement of fasteners.
SK 4453 13 Piece 3/8-Inch Drive 12 Point Deep 1/4-Inch to 1-Inch Standard Socket Set
- Suregrip hex design helps avoid edge breakage. Deep fractional socket set with high-polish superkrome finish. Patented superkrome finish for durability and maximum corrosion resistance. Made in the usa. Made in the usa.
Stanley 95-444 10-Piece 1/2-Inch Drive Standard Socket Set, SAE
- Limited lifetime warranty. Max-drive design, a unique radius corner design that provides 15% more torque. Helps reduce fastener wear without contact with the outer 5% of the fastener. 6 point standard 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 inches.
Grey Pneumatic (2048R) 1/2″ Drive x 1-1/2″ Standard Socket
- Engineered specifically for use with impact tools, using the most up to date industrial specifications made to transfer the pressure from the thinnest part of the socket wall toward the thicker section, resulting in increased strength lifetime warranty.
Stanley 95-441 10-Piece 3/8-Inch Drive Standard Socket Set, SAE
- Helps reduce fastener wear without contact with the outer 5% of the fastener. Limited lifetime warranty. Standard socket sizes 5/16″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 11/16″, 3/4″, 13/16″, 7/8″. Max-drive design, a unique radius corner design that provides 15% more torque.
Armstrong 11-030 3/8-Inch Drive 6 Point Standard Socket, 15/16-Inch
- Radius corner design engages the flats of the fastener, not the corners, providing up to 15-percent -20-percent more torque while reducing fastener rounding, enhancing the turning of worn fasteners. Socket wall dimensions are optimized to provide strength while retaining access to restricted fasteners. Eye-d markings optimize size visibility, also providing sae / metric differentiation. Unique socket retention method, cold form ball recess, provides consistent secure retention of the socket to the drive tool eliminating the possibility of either a loose fit or tight fit. Made in the usa, quality and availability.
Powerbuilt 940528 3/8″ Dr. 6 Pt. SAE Standard Socket, 9/16″
- Founded in 1979, the long beach, california based firm is privately held, with global manufacturing and sales facilities serving customers on every continent. Powerbuilt by alltrade tools llc is a global leader in the design, manufacturing and marketing of tools and shop equipment. Alltrade offers our customers innovation, flexibility and speed to market. The company’s mission statement alltrade designs, markets and supplies tools and shop equipment that meet and exceed our customers’ expectations of quality, service and value, while achieving profits to ensure the company’s and its employees’ future growth and development.
SK Hand Tool 48226 6 Point 1/2-Inch Drive Standard Socket, 26mm, Chrome
- And avoid rounding of rusted or damaged fasteners. Suregrip drive design drives the side of the fastener, not the corner, to provide increased strength. High polish superkrome plating results in a jewelry-like finish providing long life and maximum corrosion resistance.
Gorilla Automotive 1721 Telescoping Power Wrench – Standard Socket
- The gorilla power wrench’s 21″ telescoping handle provides the leverage needed to remove even the tightest lug nuts with ease. 17mm, 19mm(3/4″), 21mm(13/16″), 23mm(7/8″) socket sizes included. Includes dual sockets that fit virtually all standard original equipment lug nuts.
Emergency Repairs SAE & Metric standard Sockets Set 40Pcs Ratchet Hand Tools Kit w/ Socket Adapter & Case
- Sae socket sizes 9/16”, 5/8”, 1/2”, 7/16”, 17/32”, 15/32” , 13/32”, 3/8”, 11/32”, 5/16”, 11/16”, 9/32”, 1/4”, 7/32”, 3/16” and 5/32”. Small enough to fit under your car seat, it’s the perfect kit for emergency roadside repairs, most of these sockets are 1/4″ drive with a few 3/8 drive. With the socket adapter included, all of the sockets will work with the 3/8 ratchet included. Includes 32 standard sockets, three eight-point sockets, finger spinner, 2-3/4” extension, 3/8” to 1/4” adapter and pvc case, eight point 1/4” drive socket sizes 1/4″, 5/16″, 3/8″. Metric socket sizes 4mm, 45mm, 5mm, 55mm, 6mm, 65mm, 7mm, 75mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm and 15mm.
Stanley 94-547 15-Piece 1/2-Inch Drive Standard Socket Set, SAE
- Its max-drive design provides a 15 percent increase in torque strength and reduces fastener rounding. 80 x 3. 60 inches. Easily remove or apply just the right amount of torque on a bolt with this model 94-547 stanley 15-piece sae socket set. This durable and dependable stanley socket set meets or exceeds ansi specifications. It includes 15 chrome vanadium-forged sockets with a full polished chrome finish for corrosion resistance. 70 x 1. Stanley 15-piece socket set, sae, 94-547 high quality chrome vanadium-forged body for torque, strength and durability full polished chrome finish for anti-corrosion protection meets or exceeds ansi specifications max-drive design feature allows 15% more torque and reduces fastener rounding includes 15 sockets to complete a variety of tasks this torque socket set is a suitable addition to any toolboxhigh quality chrome vanadium-forged body for torque, strength and durabilityfull polished chrome finish for anti-corrosion protectionmeets or exceeds ansi specificationsmax-drive design feature allows 15% more torque and reduces fastener roundingincludes 15 sockets to complete a variety of tasksbrandstanleymanufacturer part number94-547model94-547finishchromematerialchrome vanadium steelcount15assembled product dimensions (l x w x h)0.
Performance Tool (W34846) 3/4″ Drive 12-Point Standard Socket 46mm 12pt Socket
- 3/4″ dr 46mm 12pt socket. Recessed edges. Polished nickel chrome plated finish resists corrosion. Socket openings are designed to reduce fastener rounding. Chrome vanadium alloy steel construction for strength and durability all backed by a lifetime warranty.
Performance Tool (W34548) 3/4″ Drive 12-Point Standard Socket
- Socket openings are designed to reduce fastener rounding. Polished nickel chrome plated finish resists corrosion. 3/4″ dr 1-1/2″ 12pt socket. Recessed edges. Chrome vanadium alloy steel construction for strength and durability all backed by a lifetime warranty.
SK Hand Tool 48217 6 Point 1/2-Inch Drive Standard Socket, 17mm, Chrome
- Suregrip drive design drives the side of the fastener, not the corner, to provide increased strength. High polish superkrome plating results in a jewelry-like finish providing long life and maximum corrosion resistance. And avoid rounding of rusted or damaged fasteners.
Standard Plumbing Supply 120443 APEX TOOL GROUP-ASIA Master Mechanic 6 Point 1/2″ Drive Deep Standard Socket, 1-1/16″
- This product is made in china. Master mechanic, 6 point, 1/2″ drive, 1-1/16″ deep standard socket. This product is highly durable.
SK Hand Tool 43918 12 Point 1/4-Inch Drive Standard Socket, 9/16-Inch, Chrome
- Suregrip drive design drives the side of the fastener, not the corner, to provide increased strength. And avoid rounding of rusted or damaged fasteners. High polish superkrome plating results in a jewelry-like finish providing long life and maximum corrosion resistance.
Grey Pneumatic (2030M) 1/2″ Drive x 30mm Standard Socket
- 1/2 dr x 30mm stnd (gry-2030m). High polish superkrome plating results in a jewelry-like finish providing long life and maximum corrosion resistance. Suregrip drive design drives the side of the fastener, not the corner, to provide increased strength.
Powerbuilt 648274 1/4″ Dr. 6 Pt. SAE Standard Socket, 9/32″
- Powerbuilt by alltrade tools llc is a global leader in the design, manufacturing and marketing of tools and shop equipment. The company’s mission statement alltrade designs, markets and supplies tools and shop equipment that meet and exceed our customers’ expectations of quality, service and value, while achieving profits to ensure the company’s and its employees’ future growth and development. Alltrade offers our customers innovation, flexibility and speed to market. Founded in 1979, the long beach, california based firm is privately held, with global manufacturing and sales facilities serving customers on every continent.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
