Best 18 Carbide Inserts

 

AMMCO 6914-10 Negative Rake Carbide Insert 10 Pack

AMMCO 6914-10 Negative Rake Carbide Insert (10 Pack)

AMMCO 6914-10 Negative Rake Carbide Insert (10 Pack) - Carbide for long lasting performance six cutting edges on each bit for use with ammco brake lathes comes with screws.

 

Carbide TiN Coated Carbide Insert for Aluminum 38 Dia 18 Thick

Carbide TiN Coated Carbide Insert for Aluminum (3/8″ Dia., 1/8″ Thick)

Carbide TiN Coated Carbide Insert for Aluminum (3/8″ Dia., 1/8″ Thick) - 3/8″ diameter, 1/8″ thick carbide tin coated (titanium nitride) carbide inserts with an “up sharp”. 015.

 

AMMCO 6918-6 Positive Rake Carbide Insert 6 Pack

AMMCO 6918-6 Positive Rake Carbide Insert (6 Pack)

AMMCO 6918-6 Positive Rake Carbide Insert (6 Pack) - 6-pack. 017″ radius. Positive rake. Carbide insert for ammco lathes.

 

Brake Lathe Carbide Insert Toolholder Right Hand 38x38x1-78

Brake Lathe Carbide Insert Toolholder (Right Hand, 3/8″x3/8″x1-7/8″)

Brake Lathe Carbide Insert Toolholder (Right Hand, 3/8″x3/8″x1-7/8″) - Left hand, 3/8″ x 3/8″ x 1-7/8″ brake lathe carbide insert toolholder for use with rotors use kk0. Right hand, 3/8″ x 3/8″ x 1-7/8″ brake lathe carbide insert toolholder for use with rotors use kk.

 

6914-10 Negative Rake Carbide Insert

6914-10 Negative Rake Carbide Insert

6914-10 Negative Rake Carbide Insert - 10 pack. Negative rake. 030 degree radius. Fits most ammco lathes with original toolholders.

 

Brake Lathe Carbide Insert Toolholder Right Hand 38x38x1-316

Brake Lathe Carbide Insert Toolholder (Right Hand, 3/8″x3/8″x1-3/16″)

Brake Lathe Carbide Insert Toolholder (Right Hand, 3/8″x3/8″x1-3/16″) - Left hand, 3/8″ x 3/8″ x 1-7/8″ brake lathe carbide insert toolholder for use with rotors use kk0. Right hand, 3/8″ x 3/8″ x 1-3/16″ brake lathe carbide insert toolholder for use with round tip us.

 

Ammco 9069146 Negative Rake Carbide Insert Pack of 6

Ammco 9069146 Negative Rake Carbide Insert, (Pack of 6)

Ammco 9069146 Negative Rake Carbide Insert, (Pack of 6) - Bit carbide cutting negative rake for brake lathes for lathe models 1000, 2002, 3000, 4000, 4100, 7000 and 7700. Package of 6.

 

Excelta - 147AT - Cutters - Hard Wire - Taper Head - Two Star - SS with Carbide Inserts - compound Action 05 Height 025 Wide 6 Length

Excelta – 147AT – Cutters – Hard Wire – Taper Head – Two Star – SS with Carbide Inserts – compound Action, 0.5″ Height, 0.25″ Wide, 6″ Length

Excelta – 147AT – Cutters – Hard Wire – Taper Head – Two Star – SS with Carbide Inserts – compound Action, 0.5″ Height, 0.25″ Wide, 6″ Length - The compound action requires much less force to cut, thus making it much more ergonomic than standard cutters. 75mm). ) Grips and dual leaf springs for smooth action. It features cushioned esd safe (10¹⁰ ohms/sq. 03mm) -. The 147at two star 6 inch long stainless steel carbide insert compound action cutter is designed for small hard wire. 005″(. 030″(.

 

Repl Carbide Insert For 125-1437 Repl Carbide Valve Seat Cutters

Repl Carbide Insert (For 1.25″-1.437″ Repl Carbide Valve Seat Cutters)

Repl Carbide Insert (For 1.25″-1.437″ Repl Carbide Valve Seat Cutters) - Replacement carbide insert for 1250″, 1437″ replaceable carbide valve seat cutters. 3/8″ diameter, 1/8″ thick carbide tin coated (titanium nitride) carbide inserts with an “up sharp”.

 

Brake Lathe Carbide Insert Toolholder Right Hand 38x38x3

Brake Lathe Carbide Insert Toolholder (Right Hand, 3/8″x3/8″x3″)

Brake Lathe Carbide Insert Toolholder (Right Hand, 3/8″x3/8″x3″) - Left hand, 3/8″ x 3/8″ x 2-3/4″ brake lathe carbide insert toolholder for use with drums/rotors u. Right hand, 3/8″ x 3/8″ x 3″ brake lathe carbide insert toolholder for use with drums/rotors use.

 

Repl Carbide Insert For 150-250 Repl Carbide Valve Seat Cutters

Repl. Carbide Insert (For 1.50″-2.50″ Repl Carbide Valve Seat Cutters)

Repl. Carbide Insert (For 1.50″-2.50″ Repl Carbide Valve Seat Cutters) - Left hand, 3/8″ x 3/8″ x 1-7/8″ brake lathe carbide insert toolholder for use with rotors use kk0. Replacement carbide insert for 1500″, 2500″ replaceable carbide valve seat cutters.

 

Shark 408-10 FmcAccu-Turn Style Carbide Inserts for Accu-Turn Or Fmc Brake Lathes

Shark 408-10 Fmc/Accu-Turn Style Carbide Inserts for Accu-Turn Or Fmc Brake Lathes

Shark 408-10 Fmc/Accu-Turn Style Carbide Inserts for Accu-Turn Or Fmc Brake Lathes - 408-10 fmc style positive rake usa made carbide inserts with larger nose radius on the bits for fmc,hofmann rj west brake lathes. Larger radius is more effective on hard spots in rotors and gives a smoother cut. Use on models 8911,8922,8944,8989,8991 or 8993. Bits come with 1,2 and 3 dots on each corner for easy identification of used tip. Offers you 3 cutting edges. Precision pressed and ground inserts are guaranteed to perform as good as oem bits.

 

Specialty Products Company 06210 Carbide Insert for Ammco Set of 10

Specialty Products Company 06210 Carbide Insert for Ammco, (Set of 10)

Specialty Products Company 06210 Carbide Insert for Ammco, (Set of 10) - Specialty products company (spc) 06210 carbide inserts for ammco (10 inserts) for ammco model 1000, 1001, 3000, 4000, 4100, 6900, 7000 and 7700 disc rotor lathe, on the car models 700, 705 and 710, rels 2000. It fits accu-turn on the car brake lathe. Its triangular carbide insert 062 has twelve cutting edges by indexing the insert. There are 10 inserts per box.

 

Specialty Products Company 06610 Carbide Insert for Ammco Set of 10

Specialty Products Company 06610 Carbide Insert for Ammco, (Set of 10)

Specialty Products Company 06610 Carbide Insert for Ammco, (Set of 10) - Specialty products company (spc) 06610 carbide inserts for ammco (10 inserts) round carbide bits for all tool, ammco, hunter, performance and rels lathes. There are 10 inserts per box.

 

Brake Lathe Carbide Insert Toolholder Right Hand 38 x 38 x 3

Brake Lathe Carbide Insert Toolholder (Right Hand, 3/8″ x 3/8″ x 3″)

Brake Lathe Carbide Insert Toolholder (Right Hand, 3/8″ x 3/8″ x 3″) - Right hand, 3/8″ x 3/8″ x 3″ brake lathe carbide insert toolholder curved holder, for rotors with. Left hand, 3/8″ x 3/8″ x 3″ brake lathe carbide insert toolholder curved holder, for rotors with a.

 

Mathieu Forcep With German Tungsten Carbide Insert

Mathieu Forcep With German Tungsten Carbide Insert

Mathieu Forcep With German Tungsten Carbide Insert - Negative rake carbide insert cb90488-10. Length 388″, width 163″, height 05 “. Pack of 10. Positive rake carbide bit 20 radius 15 angle.

 

Carbide InsertsPkg2 Display Item Promo

Carbide Inserts(Pkg/2) Display Item (Promo)

Carbide Inserts(Pkg/2) Display Item (Promo) - Negative rake brake lathe bits 2 pack. Usually ships within 1 business day. 1/2″ x 3/8″ x 2-1/2″ brake lathe carbide insert toolholder for use with drums use kk062 insert o.

 

Brake Lathe Carbide Insert Toolholder Left Hand 38 x 38 x 3

Brake Lathe Carbide Insert Toolholder (Left Hand, 3/8″ x 3/8″ x 3″)

Brake Lathe Carbide Insert Toolholder (Left Hand, 3/8″ x 3/8″ x 3″) - Replacement carbide insert for 1250″, 1437″ replaceable carbide valve seat cutters. Left hand, 3/8″ x 3/8″ x 3″ brake lathe carbide insert toolholder curved holder, for rotors with a.