Best 16 Steering Wheels

 

MTD Cub Cadet #731-0806 MTD Cub Cadet White Outdoor Yard Man Steering Wheel NOS 931-0806 - For use with riding lawnmowers and garden tractors made by cub cadet, mtd, and white outdoor products. Part #731-0806a. Replaces 731-0806, 731-0806a, 931-0806, 931-0806a. 13 1/2″ wide, 5 7/8″ deep, 1/2″ splined mount.

 

GearWrench 3510D Steering Wheel Pulling Legs - Generic dimensions -0. Dimensions overall product weight -10. Kd3510 features -wheel puller legs. 7” w x 9” d. -removes steering wheels safe and easy. -Used for late models that are not pre-drilled for standard bolts. 3” h x 1. 75 pounds.

 

OEMTOOLS 25200 Steering Wheel Puller - Heat treated for strength. Plated cross bar for rust resistance. Includes yoke, puller screw, puller nut and washers.

 

Powerbuilt 648464 Heavy Duty Steering Wheel Puller - Kit includes the following size bolts in a handy storage case set of (2) m8-125x80mm, (2) 1/4″-28×3″ nf, (2) 5/16-24×3 1/2″ nf, (2) 5/16-18×4 1/2″ nc, (2) 3/8″-16×4″ nc. Blow-molded case included to keep tools organized. Includes 2 m8-125×80 millimeter, 2 1/4 inch-28×3 inch national coarse, 2 5/16-24×3 1/2 inch national fine, 2 5/16-18×4 1/2 inch national coarse , 2 3/8 inch-16×4 inch national coarse. Can be used on steering wheels with or without telescopic or tilt steering columns. Pulls steering wheels on most domestic and imported vehicles. For removing steering wheels on most domestic and imported vehicles. Heavy duty drop-forged steering wheel puller fits most domestic and imported vehicles, with or without telescopic or tilt steering columns. Heavy duty drop-forged steering wheel puller fits most domestic and imported vehicles.

 

Water & Wood Silver Tone Round Power Handle Steering Wheel Spinner Knob for Car with Car Cleaning Cloth - Product name steering wheel knob material plastic,metal color black,gray,silver tone package content 1 x steering wheel knob net weight 120g hole inner diameter 3cm/1. 6″ see more product details. The enclosed rubber belt also can be used to adjust the fixing ring’s size. 5cm/ 2. 2″ knob diameter 56mm/2. 2″ overall height 6. Heavy-gauge clamp with rubber insert for fixing to the steering wheel more tight. Please check with your local legal authority regarding the proper use of such device for driving. Impact resistant knob is designed to fit in the palm of your hand in a round shape. And make sure your intended use complies with the relevant terms of your insurance policies. Product description for more convenient operation of steering wheel, and help control your car to back up, turn and parking easily.

 

uxcell Black Mode OT-48 Steering Wheel Hub Boss Adapter Kit w Hex Wrench for Toyota - Adapter mode ot-48material rubber, aluminium. This hub adapter do not fit 1994 miata, 1997 honda civic ex and 1995 camaro. Net weight 237gpackage content 1 x hub adapter1 x hex wrench6 x screws1 x stablizing ring. Top dia 9cm/35″bottom dia 79cm/31″. Thickness 66cm/26″color black, silver tone.

 

Professional Steering Wheel Remover Set – Lock Plate Compressor Kit - Removing steering wheels of most domestic & imported vehicles. Includes steering wheel puller, 5 sets of cap screws, steering wheel lock plate compressor.

 

CTA Tools 1520 Steering Wheel Puller Legs - Heavy-duty construction allows for strength and durability. Provides an even, straight pull. Can be used with most steerig wheel pullers or use cta models 1512 or 1515. Designed to service steering wheels that do not have tapped holes. Applications include late model cadillac, chevy/gmc, buick, oldsmobile, pontiac, jeep cherokee, ford pickups and explorer.

 

OTC 7403 Steering Wheel, Fly Wheel and Pulley Puller - This is a versatile tool, easy to use. It pulls steering wheels on most late model cars. Here’s a puller that works in a variety of applications. It also works as a regular 2/3 way puller to remove pulleys and small engine flywheels.

 

ABN Universal Wheel Bearing Packer – Automotive, Trailer, and Motorcycle Steering and Wheel Hub Bearing Repacker - Easy to use place the bearing between the plastic cones, tighten, and apply grease through the fitting on the end of the threaded shaft. Versatile for all bearings including automobile, trailer, and even motorcycle steering bearings use by hand operation or powered lube equipment as long as the bearings are not sealed, it will work for any application. Specifications cone diameter is approximately 45 inches (114cm) hard plastic cones and metal shaft. Practical use the abn universal wheel bearing packer, automotive, trailer, and motorcycle steering and wheel hub bearing repacker to thoroughly and evenly inject new grease into bearings while removing old grease in a single step. Mess-free allows packing of bearings and leaves no air pockets saves stains on clothes.

 

Eckler’s Premier Quality Products 50204621 Chevelle Horn Contact Repair Kit Steering Wheel - During steeing column restoration, the pin and spring can be lost because the retainer is removed allowing the pin and spring to fly out of the column to behind the tool box in your garage where all of your lost chevelleparts end up. Ecklers chevelle & malibuoffers this quality reproduction of this commonly lost part. Reproduction of original pin, spring and retainer common horn problem for use with original steering columns one set required per car the horn contact pin and spring set fits into the turn signal cancel cam to complete the circuit from the horn button. Note the end of the pin may need to be trimmed for some applications.

 

OEMTOOLS 25134 Steering Wheel Lock Plate Remover - Steering wheel lock plate remover for easy removal and installation of lock plate snap rings. Applicable for professional auto mechanics as well as heavy duty applications. Metric and standard adapter. Steering wheel lock plate remover for easy removal and installation of lock plate snap rings when servicing steering wheel columns. Heat treated for strength. Works on tilt and telescoping columns.

 

4-Pc Three Jaw Gear Pulley Steering Wheel Puller Set - Compatible with 6-hole steering wheel hub kit. Ball-lock type mechanism for best locking fit and usability. Fast detach allows steering wheel to be removed quickly. Push-pin security feature prevents premature unlocking. Easy to use.

 

SAVEMORE4U18 Car 14.5”/368mm Steering Wheel Holder Stand Tool Wheel Alignment Essential Tool - This rack is a simple but must have tool for aligning a vehicle, it has a loaded spring to fit a wide variety of cars, trucks etc. Material iron, plastic. To make measurement more accurate. By pressing the locking switch can adjust the height. Width 155mm/61” height 368mm/145”.

 

uxcell Van Steel Steering Wheel Base Hub Adapter - Brand aftermarket for mitsubishi jeep. Dimension 7 x 10cm/28″ x 4″(hd). Color black. Product name steering wheel base package content 1 x steering wheel base (non-oem). Material plastic.

 

STEERING WHEEL PULLER & CRANKSAFT - 25 also removes the crankshaft pulleys on chrysler 2. This tool is proudly made of the finest components under the most stringent manufacturing guidelines. 5l enginespulling the steering wheel and crankshaft kd tools have made a simple way to do so, with this steering wheel and crankshaft puller it prevents any damage to the steering column. Features and benefits pulls steering wheels on most u. And imported cars floating swivel on center screw prevents damage to steering column five sets of side bolts included 3/8″-16 unc, 516″-18 unf, 5/16″- 24 unf, 1/4″-28 unf, 8mm x 1. S. 2l and 2. Made for the everyday use.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.