IIT 46801 10″ Diagonal Plier with Double Dipped Cushion,
- For very tough, continuous use. Precision cutting edges cut several types of wire including piano wire. High cutting performance with minimum effort due to optimum coordination of the cutting edge angle, transmission ratio and ergonomic handle shape.
IIT 45510 8″ Diagonal Plier,
- Plier jaws are polished and machined for precision. Pliers are made from drop forged, heat treated steel. Handles are covered in high visibility cushioned grips making them comfortable and easy to locate.
Stanley 84-108 7 Inch Diagonal Pliers Size: 180Mm Model: 84-108 Tools & Home Improvement
- Stanley 84-108 7″ diagonal pliers. Double dipped handle for comfort. Rust resistant finish. Hardened cutting edges for durability. Meets or exceeds ansi standards. Forged steel construction.
4.5 inch Needle nose pliers mini pliers diagonal pliers clamp （A set of 2 pieces）
- Specification 45 inches. Material steel. The combination includes mini needle nose pliers and diagonal pliers. Pliers for cutting line diameter thin and single stranded strands, and the wire bending and round etc. Diagonal pliers wire and small plastic flash head.
Dykes 4.5″ Side Cutter Diagonal Wire Cutting Pliers Diagonal Wire Cutter Side Cutting Pliers (wire cutter)
- Side cutter for cutting soft wire, guitar strings, copper, aluminum, soft-alloy wires, cable ties, and plastic parts. Carbon steel construction provides durability and long life. 45″ diagonal pliers with tempered jaws for hard to reach areas, great tools for electronic repair or jewelry making. Spring loaded design makes this wire cutter easier to use and relieve fatigue. Plastic-dipped handles added comfort for this diagonal cutting pliers.
Klein Tools Diagonal Pliers 9 “
- Klein tools diagonal cutting pliers, type high leverage diagonal, style angled head hooked handle, size 9″, length 9-3/16″, color red handle, jaw length 13/16″ (21 mm), jaw thickness 7/16″ (11 mm), jaw width 1-3/16″ (30 mm).
Klein Tools D2000-48 Heavy Duty Diagonal Cutting Pliers, 8-Inch
- High-leverage design, rivet is closer to the cutting edge for 36% greater cutting power than other plier designs. Angled head design for easy work in confined spaces. Induction-hardened cutting knives for long life. Short jaws and beveled cutting edges permit close cutting of wire. Cuts acsr, screws, nails and most hardened wire.
Stanley 84-114 3 Piece Basic 6-Inch Slip Joint, 6-Inch Long Nose, and 6-Inch Diagonal Plier Set
- Rust-resistant finish for greater protection double-dipped handle for extra comfort. Hardened cutting edges and chrome-nickel steel for extra-tough cutting edge. Forged-steel construction for durability. Includes 3 sets of pliers with forged-steel construction for durability. Meets or exceeds ansi standards.
Klein Tools J248-8 Journeyman High Leverage Diagonal Cutting Pliers with Angled Head, 8-Inch
- The dual-material journeyman handles give added grip and comfortable use. Klein tools specializes in making some of the world’s finest pliers. The angled head design makes work easier in confined spaces. The high-leverage design of these 8” (203 mm) journeyman diagonal-cutting pliers provides 36% greater cutting power than other pliers.
Milwaukee 48-22-4107 6 in 1 Diagonal Pliers, 7-Inch
- Reaming head design-smooth edges of metal pipe from 1/2-inch to 1-inch (patent pending). Bolt cutter-thread and cut #6 and #8 bolts to preferred length (patent pending). Offset head design, 15 degree offset head for easier and quicker prying and pulling (patent pending). Laser hardened cutting edges, cuts wire bolts screws and nails. High leverage design, for cutting power and performance.
Stanley 84-028 7-Inch Bi-Material Diagonal Pliers
- ‘ Diagonal cutters, uninsulated, nonsparking no, esd safe no, nose type oval, overall length 7 in. , Spring return no, wire stripper no, jaw bend 0 degrees , tip width 17/32 in. , Standard tool (accessory needed for tethering), flush cut, cutting capacity/material 13/16 in. , Material steel, handle type ergonomic, handle color black, voltage rating not rated, features individually sharpened blades ‘. , jaw width 1-7/64 in. , Jaw length 13/16 in.
Craftsman 9-45076 Diagonal Pliers, 7″
- 738″ overall length. Induction hardened cutters. Textured grips are contoured for comfort and control. Clear coat. Forged alloy steel, heat treated for strength and durability.
Stanley 84-108 7 Inch Diagonal Pliers Size: 180Mm Model: 84-108 Car/Vehicle Accessories/Parts by Auto & Car Acc
- Rust resistant finish. Stanley 84-108 7″ diagonal pliers. Forged steel construction. Meets or exceeds ansi standards. Double dipped handle for comfort. Hardened cutting edges for durability.
Performance Tool W30726 8-Inch Diagonal Pliers
- The wilmar w30726 8-inch diagonal pliers feature an ergonomic non-slip molded grip for improved comfort and control. Precision machined jaws provide maximum gripping power. Made from premium quality drop forged and hardened chrome vanadium steel with induction hardened and precision sharpened cutting edges.
BOOHER 0220306 Insulated Diagonal Cutting Pliers 6″
- Insulated pliers use cr-v steel. Each insulated tool has passed 2 times 10,000vac test to ensure safety, obtained gs/vde certificate. Special insulated material with anti-burn and high-low temperature resistance. Total size (closed)170x56x29mm/67″x22″x12″(lwt) ,max width 22mm/087″ ,handle size 110mm/43″(l). Each tool is tested to a voltage of 10,000 vac and certified to 1,000 vac.
Craftsman 9-45768 8-Inch Bent Wide Jaw Diagonal Pliers
- Made of specialized alloy steel for durability. Blades are hardened and clear coated for longer life and corrosion protection. 8-inch bent wide jaw diagonal pliers. Guaranteed forever. Double wall textured cushion grips for comfort and better hold.
Dewalt DWHT70795 10 in. Angled Diagonal Pliers
- Meets & exceeds ansi specifications. Cr-v steel construction for durability. Dipped gears for comfort & secure grip. Precision machined jaws for gripping, twisting & cutting. Anti-tear material helps extend the life of grips.
Knipex 7422-10 10″ Ultra High Leverage Diagonal Pliers
- Made from chrome vanadium electric steel, oil hardened and tempered. The cutting edges being in the center of the plier head. Cutting edge induction-hardened and factory tested. Designed for easy cutting of hard, soft piano wire. Fixed, forged-on axle rivet for durability under heavy use.
10 Inch Diagonal Plier Cutters
- Every tool box needs a set of a diagonal wire cutters. Wire cutters are great when it’s time to cut or strip that wire while you are in the middle of a job. What your tool box needs is always a good set of pliers with a set of diagonal wire cutter pliers.
WORKPRO W031004A Heavy Duty Diagonal Pliers, 7″
- Drop forged steel with ni-fe coating for durability. Precision cutting edges for soft and hard wire. Bi-material comfort grip handle.
Goldblatt 7-inch Multi-use Diagonal Plier
- These pliers are hot forged from high alloy steel and heat treated to achieve maximum strength and durability. These multi-functional diagonal pliers possess a host of features, including ergonomic bi-material grips, built in wire strippers that can strip stranded and solid wire, plus this is a versatile crimping tool.
Crescent CCA5428 8-Inch Pivot Pro Compound Action Diagonal Plier, Red
- Unlike standard pliers that pivot on the center-bolt only, additional leverage can be applied providing more leverage and force to the cutting edge. Induction hardened cutting edge for long life. Dual material grips for added comfort and durability. Unique pivot action design requires 40% less force to cut. Forged steel body for strength and durability.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
