Plews (11-955) 8-Piece Standard Grease Fitting Assortment
- Easy to use. 1/4 inch -28 standard fittings on blister card. The product is manufactured in united states. The product is 8pk grease fittingasstd. Includes 4 straight, 2 at 45 degree angle and 2 at 90 degree angle fittings.
Lumax LX-4805 Gold/Silver (SAE) 1/4″-28 and 1/8″ P.T.F. 8 Piece Grease Fitting Assortment
- This is a 8 piece assortment, (sae), 1/4 inches-28 taper and 1/8 inches npt grease fitting. These fittings have a ball check in the head to prevent dirt and grit from getting into the fitting, heavier wall thickness for extra strength, are zinc plated with a yellow passivated finish for maximum protection against corrosion, and have a stress relieved and tempered carbon steel spring. Every fitting is individually inspected and batch tested to 5,000 psi and are designed to meet the demanding requirements of most automotive, agricultural, industrial, marine, truck, federal, and construction equipment needs.
Lumax LX-3309-10 Gold/Silver 8mm x 1mm Taper Metric Thread 45 Degree 0.81″ Long Grease Fitting, (Pack of 10)
- 81 inches grease fitting. This is a 8 millimeter x 1 millimeter, taper metric thread, 45 degree, 0. Every fitting is individually inspected and batch tested to 5,000 psi and are designed to meet the demanding requirements of most automotive, agricultural, industrial, marine, truck, federal, and construction equipment needs. These fittings have a ball check in the head to prevent dirt and grit from getting into the fitting, heavier wall thickness for extra strength, are zinc plated with a yellow passivated finish for maximum protection against corrosion, and have a stress relieved and tempered carbon steel spring.
Lubeq 16201 SAE Grease Fittings, 8 Pieces
- Galvanized steel finish with steel ball. Grease fitting assortment 8 pieces sae grease fittings. 2 ea 1/4 28 straight, 3 ea 1/4 28 90 degrees, 3 ea 1/4 28 45 degrees.
Milton S-3219 1/8″ 27 Pipe Threads 90 Degree Grease Fitting
- Grease gun, accessory. Grease fitting 1/8″, 27 ptf. For best results, use with milton grease guns. Longer 90 degree fitting.
Lincoln Lubrication G904 Small 4-Way Grease Fitting Tool
- Like all lincoln products, the guardian name is your assurance that what you’re buying is no ordinary piece of equipment. Designed for life outside the shop, guardian brings you a level of performance previously unavailable in over-the-counter lubrication equipment. For over 90 years, service professionals have looked to lincoln for lubrication equipment designed to meet the demands of day-to-day shop life. In response to overwhelming requests, lincoln proudly makes its equipment available to those outside the service industry with our guardian line of lubrication products. Every guardian product is engineered to meet the industry’s most exacting standards for reliability and performance.
110 Pieces Hydraulic Grease Fittings Zerk Alemite
- 15 — 90 degrees 1/4″, 28. 15 — 45 degrees 1/8″, npt. 15 — 45 degrees 1/4″, 28. Clear storage case for organization. 30 straight 1/4″, 28. 20 — straight 1/8″, npt. 15–90 degrees 1/8″, npt.
Lumax LX-3019-10 Gold/Silver 1/4″-28 Taper Thread (SAE-LT) 90 Degree 0.75″ Long Grease Fitting, (Pack of 10)
- This is a 1/4 inches-28 taper thread (sae-lt), 90 degree, 0. 75 inches grease fitting. It is used on most auto vehicles and on industrial equipment. Every fitting is individually inspected and batch tested to 5,000 psi and are designed to meet the demanding requirements of most automotive, agricultural, industrial, marine, truck, federal and construction equipment needs. These fittings have a ball check in the head to prevent dirt and grit from getting into the fitting, heavier wall thickness for extra strength, are zinc plated with a yellow passivated finish for maximum protection against corrosion, and have a stress relieved and tempered carbon steel spring. The ball check prevents dust and dirt contamination. Sae-lt threads conforms to society of automotive engineers lubrication thread specification.
LockNLube Grease Gun Coupler – Zerk Grease Coupler Fitting Tip – Easy Lock-on, Clip-off – Stays on – Grease goes in, not on the machine
- Ends the waste ends the mess ends greasing frustration. Fits standard grease guns, 1/8″ npt fitting fits all sae and metric zerk fittings simply replace your existing coupler, click the orange button on the right to buy. Grease goes in, not on the machine no more grease mess everywhere. Unique design locks onstays onno leaks four hardened spring steel jaws are resilient under high pressure, max 10,000 psi.
Milton S-3234 Easy Out Grease Fitting Tool
- Grease gun accessory. Grease fitting tool easy out grease fitting tool hex size 5/6″ and 3/8″ 0 0 0. This is really 4 tools in one, re-taps holes, installs fittings, removes fittings and removes broken fittings. Works with both straight and angled fittings.
Lumax LX-4841 Gold/Silver (SAE) 1/4″-28 Taper and 1/8″ P.T.F. 100 Piece Grease Fitting Assortment
- Heavier wall thickness for extra strength. Includes two installation / removal tools and fits lx-3007 (40 piece), lx-3013 (10 piece), lx-3019 (10 piece), lx-3101 (20 piece), lx-3113 (10 piece), lx-3119 (10 piece), lx-1428 (1 piece), lx-1426 (1 piece). Ball check in head prevents dirt from getting in. Passivated finish for maximum protection from corrosion. Stress relieved and tempered carbon steel spring.
Grease Buster Tools – Heavy-Duty Adjustable Hydraulic Coupler Grease Fitting And Bearings Cleaner – Regular Size- Shop size- Piston
- Use with a pneumatic hammer to clean clogged grease fittings and bearings with pneumatic pressure. A pneumatic piston accessory for your shop size grease buster.
Lumax LX-3509-10 Gold/Silver Drive Type Straight 0.56″ Long Grease Fitting for 1/4″ Diameter Hole, (Pack of 10)
- Drive fittings must be used where high lubricant back pressures can be developed. Ball check in the head prevents dirt and grit from getting into the fitting. Heavier wall thickness for extra strength. Zinc plated with yellow passivated finish, for maximum protection against corrosion. Fully hardened for extra durability and to protect them from wear due to constant use.
T & E Tools 5699 Locking Grease Fitting Coupler
- Knurled handle for easy grip when releasing. Pressure relief screw makes removing a snap. The coupler is low profile so it is easy to get back into recessed grease zerks. Standard thread and screws onto most grease guns.
Lumax LX-3305-10 Gold/Silver 6mm x 1mm Taper Metric Thread 90 Degree 0.75″ Long Grease Fitting, (Pack of 10)
- These fittings have a ball check in the head to prevent dirt and grit from getting into the fitting, heavier wall thickness for extra strength, are zinc plated with a yellow passivated finish for maximum protection against corrosion, and have a stress relieved and tempered carbon steel spring. Every fitting is individually inspected and batch tested to 5,000 psi and are designed to meet the demanding requirements of most automotive, agricultural, industrial, marine, truck, federal, and construction equipment needs. 75 inches grease fitting. This is a 6 millimeter x 1 millimeter, taper metric thread, 90 degree, 0.
Plews 11-201 Grease Fitting
- 9/16 inch wrench size 7/8 inch overall length 5 pack. Gf, 1/4″ pt straight, 5 pack. Fits 1/4-18 npt threads. Plews-lubrimatic grease zerk fitting with check ball that prevents dirt from entering the fitting. Replacement grease fittings for automotive, farm, equipment and industrial use. Straight, short.
70 Piece Grease Fitting Assortment
- Meets specifications sae j-534. 2pieces of 1/4 inch-28 45 straight. 70 piece grease fitting assortment. 2 piece of 1/4 inch-28 90 straight. Meets specifications sae j-534. 8 pc assorted grease fittings 1/4″ x 28. 4 pieces of 1/4 inch-28 straight.
Lincoln Lubrication 5468 Assorted FTG Grease Fitting – 10 Piece
- The internal spring on the fittings is tempered with music wire, coiled so that it cannot be compressed to restrict the flow of heavy lubricants, or forced out of the body under normal pressures. The fittings have a specially formed lip at the fitting base that locks the spring and ball securely in place. The fittings can be wiped clean without forcing foreign material into the fitting and the bearing. The ball check in the head of the fitting prevents dirt and grit from getting into the bearing.
Lumax LX-3505-10 Gold/Silver Drive Type Straight 0.50″ Long Grease Fitting for 3/16″ Diameter Hole, (Pack of 10)
- Every fitting is individually inspected and batch tested to 5,000 psi and are designed to meet the demanding requirements of most automotive, agricultural, industrial, marine, truck, federal, and construction equipment needs. These fittings have a ball check in the head to prevent dirt and grit from getting into the fitting, heavier wall thickness for extra strength, are zinc plated with a yellow passivated finish for maximum protection against corrosion and have a stress relieved and tempered carbon steel spring.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
