Fluke 325 40/400A AC/DC, 600V AC/DC TRMS Clamp Meter w/ Frequency, Temp, & Capacitance Measurements
- Digital clamp meter measures ac current to 400 amp, ac and dc voltage to 600v, and resistance to 4 kilohms. Ac voltage make for the most accurate measurements on non-linear signals. 400 a ac and dc current measurement. Resistance measurement up to 40. True rms sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform. Jaw opening measures current in a conductor up to 30mm without touching or interrupting the circuit. Temperature and capacitance measurement. Frequency measurement. Meets iec safety standard 61010-1, and is rated for cat iv installations to 300v and cat iii installations to 600v. Audible continuity sensor confirms that the circuit conducts electricity.
Fluke FLUKE-116/323 KIT HVAC Multimeter and Clamp Meter Combo Kit
- Resistance, continuity, frequency and capacitance. Helps prevent false readings due to ghost voltage. Large white led backlight to work in poorly lit areas. Your unit is calibrated prior to shipment with a new nist-traceable calibration certificate with data. The nist calibration provides you assurance your instrument meets manufacturer’s specifications your instrument is ready to use day one meeting most quality system standards.
Fluke L215 SureGrip Kit with Probe Light and Probe Extender
- Tp220 suregrip test probes. Foldable soft pouch with six pockets and hook-and-loop. Tl224 suregrip silicon test lead set. Suregrip kit with probe light and probe extender. L200 probe light. Tp280 20cm test probe extenders.
Fluke 1507 Digital Megohmmeter, 50/100/250/500/1,000V Test Voltages, 10 Gigaohms Insulation Resistance, 20 Kilohms Low-Resistance, 600V Voltage Detection
- Live circuit detection prevents insulation test if voltage greater than 30-volts is detected for added user protection. Make repetitive tests simple and easy with the 1507’s compare (pass/fail) function. Repetitive or hard-to-reach testing is easy with the remote test probe. Read measurements easily with large, backlit display. Save both time and money with automatic calculation of polarization index and dielectric absorption ratio. Repetitive or hard-to-reach testing is easy with the remote test probe. Read measurements easily with large, backlit display. Live circuit detection prevents insulation test if voltage greater than 30-volts is detected for added user protection.
Fluke 77-IV Digital Multimeter, Yellow
- Min/max to record signal fluctuations. Large display auto and manual ranging. Free your hands with the optional tpak magnetic hanger. Large display. Backlight for work in dim areas. Ergonomic overmolded housing with integrated probe holders. Auto and manual ranging. Versatile meter for field service or bench repair.
Fluke TL223-1 SureGrip Electrical Test Lead Set with SureGrip Insulated Test Probes
- Handy all-in-one kit includes ac220 suregrip alligator clip set, tp238 suregrip insulated test probe set, tl224 suregrip silicone test lead set (straight to right). 1 year warranty. Suregrip electrical test lead set.
Fluke PV350 Pressure/Vacuum Transducer Module, 500 psi Pressure
- Storage temperature -51 to 71 degree c. 5 in-hg (+/-1 percent of reading +/-1. If they are not, contamination or damage to the system being measured may result. Cable length 8′. The pv350 is compatible with industrial gases and liquids that are compatible with 316 stainless steel. Meter input impedance greater than or equal to 10 m ohms. Electrical cable black pvc, will withstand up to 105 degree c. Shock 1 meter drop. 0 kpa) vacuum range 0 to 29. Resolution 0. Battery standard 9 v battery (neda #1604, 6f22, 006p). Maximum working pressure 500 psi. Battery life 300 hours (typical) for carbon-zinc 400 hour (typical) for alkaline. Connector brass 1/4″ male flare to 1/4″ female pipe thread. A module and a high-performance digital multimeter (dmm) with min/max function become a data logger capable of measuring peak high and peak low. Vibration 3 g at 55 hz sinusoidal. The pv350 pressure/vacuum transducer module (the module) measures gauge pressure the difference between atmospheric (barometric) pressure and the pressure (or vacuum) applied to the pressure port on the transducer. 3 cm-hg). It then converts that measurement to 1 mv dc per unit. Pressure port connection 1/4″ npt. When making measurements on more than one type of pressure system, make sure the fluids or gases in those systems are compatible. 1 psi/in-hg in mv range, 1 psi/in-hg in volt range with 3-1/2 or 4-digit meters. Pressure range 350 to 500 psig (2413 to 3447 kpa), accuracy +/-5 percent of reading +/-1 psig typical (+/-5 percent +/-7. To determine the compatibility of a liquid or gas, refer to the manufacturer’s specifications. Rfi specification typically less than 1 percent error from 14 khz to 30 mhz at 1 v/m. Burst pressure 1000 psi. Output 1 mv per unit (psi, kpa, cm-hg or in-hg). 9″ hg (0 to 76 cm-hg), accuracy +/-1 percent of reading +/-0.
Fluke TL82 Automotive Pin and Socket Adapter Set
- Size 22 contact 03-inch (076 mm) rated 5 a. Size 20 contact 04-inch (102 mm) rated 75a. Size 16 contact 06-inch (160 mm) rated 13. Tested to 60 v dc. Size 12 contact 093-inch (236 mm) rated 23.
Fluke 116 HVAC Multimeter
- For the complete solution to hvac troubleshooting the extra value-packed hvac technician’s combo kit, provides the ability to troubleshoot and solve problems more efficiently by providing all the needed accessories an hvac professional would need in a compact carry case.
Fluke AC285-FTP Alligator Clips and Adaptors, 1000V Voltage, 10A Current, Red and Black, For FTP-1 or FTPL-1 Fused Test Probes
- Strong, nickel-plated steel jaws for a tight hold. 75″) nut. Multi-purpose tooth pattern grips anything from fine gauge wire to a 20mm (0. One-year warranty. Suregrip has rubber overmolded surfaces for a firm reliable grip. 10a maximum, pollution degree 2, 2000 m altitude. Operating temperature -4 to 131 degree f, 95 percent rh. Includes model a pair of red and black extra large alligator clips plus adaptors to securely attach the alligator clips to fluke fused test probes ftp-1, ftpl-1, ftp and ftpl. Conforms to safety standard iec61010-0312002 +a12008, cat iii 1000v, cat iv 600v.
Fluke 9040 3 Phase Rotation Indicator
- The fluke 9040 is a rotary field indicator and can provide clear indication of the 3 phase via an lcd display and the phase rotation direction to determine correct connections. 40 to 700v voltage range. Continuous operating timer. No battery required. Ip 40 dust/water resistance. 15 to 400 hz frequency range. The included test probes have a variable clamping range for safe contact, also in industrial sockets. Measures 61mm width by 124mm height by 27mm depth. The fluke 9040 is effective for measuring phase rotation in all areas where three phase supplies are used to feed motors, drives and electrical systems. It allows rapid determination of phase sequence and has a voltage (up to 700 v) and frequency range suitable for commercial and industrial applications. 2 years warranty. 3 phase indication. 0 to 40 degree c operating temperature. Clear lcd display. Indication of phase rotation.
Fluke TP1 Slim-Reach Flat Blade Test Probe with Stainless Steel Tip, 1000V Voltage, 10A Current
- The fluke slim-reach test probe is designed for probing closely spaced or recessed terminals. Flat blade design to hold securely in blade type electrical wall sockets. Cat iv 600v, cat iii 1000v, 10 a rating, ul listed. Hard stainless steel probe tips. 1 year warranty.
Fluke-289/FVF FlukeView Forms Combo Kit
- Trendcapture graphically displays logged data session to quickly determine whether anomalies may have occurred. Real time clock for automatic time stamping of saved readings. Unique logging and graphing capabilities mean you no longer need to download logged readings to a pc to detect a trend. Large 50,000 count, 1/4 vga display with a white backlight. Stores up to 15,000 recorded events.
Fluke 80TK Thermocouple Module
- Measurement range -50 to 1000 degree celsius (probe dependent). Probe dependent. For use with type-k thermocouples in low-voltage applications. Voltage range below 24-volt ac, 60-volt dc. Converts a dmm to a thermometer.
Fluke FLK-T3000 FC Wireless K-Type Temperature Module
- Wireless module with thermocouple thermometer and k-type bead thermocouple has a range of -200 to +1,372 degrees c, and can wirelessly relay measurements to fluke connect enabled master units. Works as a standalone meter or with the following (sold separately) fluke 3000 fc dmm, fluke ti200/300/400 infrared cameras, pc with fluke pc3000 adapter, and fluke connect mobile app. Module includes a t3000 thermocouple thermometer, 80pk-1 k-type bead thermocouple, and a magnetic hanging strap.
Fluke T5-RLS Replacement Test Lead Set
- Measurement range and accuracy. Suitable for low-voltage applications (below 30-volt ac, 60-volt dc). Price for each kit contents test leads rohs compliant na. Fluke 80ak-a replaces the older model fluke 80ak. Probe dependent.
Fluke 892583 Digital Multimeter Fast Acting Replacement Fuse, 600V AC Voltage, 15A AC Current
- Digital multimeter replacement fuse. Maximum voltage to ground 600v. Nominal current 15a.
Fluke 80PK-8 Pipe Clamp Temperature Probe
- Type-k thermocouple for fast temperature and superheat measurements of pipe surfaces. Durable ribbon sensor. Durable ribbon sensor. For pipe diameters 64 mm to 349 mm (25 to 1375-inch. Measurement range -29 to 149 degree celsius.
Fluke LVD2/CT Volt Light with Counter Top Display, 90 to 600V AC Voltage
- Led light with 100000 hour life. Non-contact ac voltage detector and led flashlight combined into one easy to use pen-style design. The lvd2 is a cat iv 600 v rated non-contact detector that is suitable for commercial and industrial applications. The lvd2 includes dual sensitivity turning blue 1 to 5 (254cm to 127cm) from the source and red when at the source. Aaa battery included.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
