Yellow Gas Can Cap That Fits Your Vintage Blitz Spout – 10 Single Caps & 10 Vents
- If you want maximum air flow, drill the diaphragm out with a 7/64″ bit. You may receive vents with a closed diaphragm, depending on the supplier, if this is the case we suggest using a paperclip to poke ~5 holes in the venting area (diaphragm). You are now ready to vent. Drill the final hole with a (31/64″), 1/2″ is close enough, boring bit. This will keep dirt from getting in through the vent, while still allowing air to pass through. Choose an area where the vent will be above the “full” line. Be gentle when drilling, and check can for any debris now that you have your 1/2″ hole, install the vent by pushing firmly to seat or by tapping gently with a hammer. • keeps dirt/debris out of your gas cans keeps your carburetors clean • no more gas fumes in your car after filling the gas cans at the station • made in the usa, fall branch, tn out of polypropylene plastic • vintage to new, we have the cap for you • never lose your yellow cap again • fits blitz, kolpin, rotopax, scepter and others • replacement gas can yellow cap & gas can vent free shipping to the lower 48 states (+ alaska & hawaii}, ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location (designed to fit the vintage blitz gas can spouts) vent installation pre-drill (with a 1/16″ drill bit) a small hole on top of the can, opposite side of the spout.
Yellow Gas Can Cap That Fits Your Vintage Blitz Spout – 6 Single Caps & 1 FREE Vent
- Be gentle when drilling, and check can for any debris now that you have your 1/2″ hole, install the vent by pushing firmly to seat or by tapping gently with a hammer. Shipping charges to be calculated, so contact us first. Drill the final hole with a (31/64″), 1/2″ is close enough, boring bit. We will ship international, buyer pays all shipping charges. You are now ready to vent. Choose an area where the vent will be above the “full” line. • Keeps dirt/debris out of your gas cans keeps your carburetors clean • no more gas fumes in your car after filling the gas cans at the station • made in the usa, fall branch, tn out of polypropylene plastic • vintage to new, we have the cap for you • never lose your yellow cap again • fits blitz, kolpin, rotopax, scepter and others • replacement gas can yellow cap gas can vent free shipping to the lower 48 states (+ alaska, hawaii, guam & pr), ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location (designed to fit the vintage blitz gas can spouts) vent installation pre-drill (with a 1/16″ drill bit) a small hole on top of the can, opposite side of the spout.
Yellow Gas Can Cap That Fits Your Vintage Blitz Spout – 9 Single Caps & 1 FREE Vent
- Choose an area where the vent will be above the “full” line. We will ship international, buyer pays all shipping charges. You are now ready to vent. Drill the final hole with a (31/64″), 1/2″ is close enough, boring bit. • Keeps dirt/debris out of your gas cans keeps your carburetors clean • no more gas fumes in your car after filling the gas cans at the station • made in the usa, fall branch, tn out of polypropylene plastic • vintage to new, we have the cap for you • never lose your yellow cap again • fits blitz, kolpin, rotopax, scepter and others • replacement gas can yellow cap gas can vent free shipping to the lower 48 states (+ alaska, hawaii, guam & pr), ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location (designed to fit the vintage blitz gas can spouts) vent installation pre-drill (with a 1/16″ drill bit) a small hole on top of the can, opposite side of the spout. Be gentle when drilling, and check can for any debris now that you have your 1/2″ hole, install the vent by pushing firmly to seat or by tapping gently with a hammer. Shipping charges to be calculated, so contact us first.
Gas Can Spout Gasket – Fits All EZ-POUR Products
- No (0) piece of string. No (0) velcro dot. Ez-pour spout. One (1) free vent.
Yellow Gas Can Cap That Fits Your Vintage Blitz Spout – 10 Single Caps & 1 FREE Vent
- Drill the final hole with a (31/64″), 1/2″ is close enough, boring bit. We will ship international, buyer pays all shipping charges. Be gentle when drilling, and check can for any debris now that you have your 1/2″ hole, install the vent by pushing firmly to seat or by tapping gently with a hammer. You are now ready to vent. Shipping charges to be calculated, so contact us first. Choose an area where the vent will be above the “full” line. • Keeps dirt/debris out of your gas cans keeps your carburetors clean • no more gas fumes in your car after filling the gas cans at the station • made in the usa, fall branch, tn out of polypropylene plastic • vintage to new, we have the cap for you • never lose your yellow cap again • fits blitz, kolpin, rotopax, scepter and others • replacement gas can yellow cap gas can vent free shipping to the lower 48 states (+ alaska, hawaii, guam & pr), ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location (designed to fit the vintage blitz gas can spouts) vent installation pre-drill (with a 1/16″ drill bit) a small hole on top of the can, opposite side of the spout.
Yellow Gas Can Cap That Fits Your Vintage Blitz Spout – 12 Single Caps & 12 Vents
- • Keeps dirt/debris out of your gas cans keeps your carburetors clean • no more gas fumes in your car after filling the gas cans at the station • made in the usa, fall branch, tn out of polypropylene plastic • vintage to new, we have the cap for you • never lose your yellow cap again • fits blitz, kolpin, rotopax, scepter and others • replacement gas can yellow cap & gas can vent free shipping to the lower 48 states (+ alaska & hawaii}, ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location (designed to fit the vintage blitz gas can spouts) vent installation pre-drill (with a 1/16″ drill bit) a small hole on top of the can, opposite side of the spout. Drill the final hole with a (31/64″), 1/2″ is close enough, boring bit. You may receive vents with a closed diaphragm, depending on the supplier, if this is the case we suggest using a paperclip to poke ~5 holes in the venting area (diaphragm). If you want maximum air flow, drill the diaphragm out with a 7/64″ bit. Choose an area where the vent will be above the “full” line. You are now ready to vent. This will keep dirt from getting in through the vent, while still allowing air to pass through. Be gentle when drilling, and check can for any debris now that you have your 1/2″ hole, install the vent by pushing firmly to seat or by tapping gently with a hammer.
Yellow Gas Can Cap That Fits Your Vintage Blitz Spout – 19 Single Caps & 19 Vents
- You are now ready to vent. You may receive vents with a closed diaphragm, depending on the supplier, if this is the case we suggest using a paperclip to poke ~5 holes in the venting area (diaphragm). Drill the final hole with a (31/64″), 1/2″ is close enough, boring bit. • keeps dirt/debris out of your gas cans keeps your carburetors clean • no more gas fumes in your car after filling the gas cans at the station • made in the usa, fall branch, tn out of polypropylene plastic • vintage to new, we have the cap for you • never lose your yellow cap again • fits blitz, kolpin, rotopax, scepter and others • replacement gas can yellow cap & gas can vent free shipping to the lower 48 states (+ alaska & hawaii}, ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location (designed to fit the vintage blitz gas can spouts) vent installation pre-drill (with a 1/16″ drill bit) a small hole on top of the can, opposite side of the spout. Choose an area where the vent will be above the “full” line. If you want maximum air flow, drill the diaphragm out with a 7/64″ bit. Be gentle when drilling, and check can for any debris now that you have your 1/2″ hole, install the vent by pushing firmly to seat or by tapping gently with a hammer. This will keep dirt from getting in through the vent, while still allowing air to pass through.
Hi-Flo Gas Can Spout Kit
- Due to (carb) california air resources board regulations, this product is banned for sale in the following states ca, ct, dc, de, ma, me, md, nh, nj, ny, oh, and va. Includes 2 base caps with different threads, 1/2″ replacement push in vent, 8″ spout, and 8″ spout extension. White or black kits have identical parts and vary only in color and packaging. Fix your old cans up with a brand new, heavy duty spout (pre 2009 cans only). Ez pour hi-flo can empty a 5 gallon vented can in 35 seconds and comes with 8″ spout extension.
Yellow Gas Can Cap That Fits Your Vintage Blitz Spout – 6 Single Caps & 6 Vents
- Be gentle when drilling, and check can for any debris now that you have your 1/2″ hole, install the vent by pushing firmly to seat or by tapping gently with a hammer. If you want maximum air flow, drill the diaphragm out with a 7/64″ bit. This will keep dirt from getting in through the vent, while still allowing air to pass through. You are now ready to vent. You may receive vents with a closed diaphragm, depending on the supplier, if this is the case we suggest using a paperclip to poke ~5 holes in the venting area (diaphragm). Choose an area where the vent will be above the “full” line. Drill the final hole with a (31/64″), 1/2″ is close enough, boring bit. • Keeps dirt/debris out of your gas cans keeps your carburetors clean • no more gas fumes in your car after filling the gas cans at the station • made in the usa, fall branch, tn out of polypropylene plastic • vintage to new, we have the cap for you • never lose your yellow cap again • fits blitz, kolpin, rotopax, scepter and others • replacement gas can yellow cap & gas can vent free shipping to the lower 48 states (+ alaska & hawaii}, ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location (designed to fit the vintage blitz gas can spouts) vent installation pre-drill (with a 1/16″ drill bit) a small hole on top of the can, opposite side of the spout.
Gas Spout – Replacement Spout And Cap For Pre 2009 Gas Cans And Water Jugs (White Set or Black Set)
- Due to (carb) california air resources board regulations, this product is banned for sale in the following states ca, ct, dc, de, ma, me, md, nh, nj, ny, oh, pa and va. Colors may vary between black and white, but all units and parts are identical. Ez-pour replacement spout and vent kit let’s you reuse old cans (for cans sold before 1/1/2009). Includes spout, cap, secondary cap, replacement vent, secondary base cap, and flame arrester. Easy flow action with superior manufacturing that won’t break down or spill.
Yellow Gas Can Cap That Fits Your Vintage Blitz Spout – 7 Single Caps & 7 Vents
- Choose an area where the vent will be above the “full” line. If you want maximum air flow, drill the diaphragm out with a 7/64″ bit. • Keeps dirt/debris out of your gas cans keeps your carburetors clean • no more gas fumes in your car after filling the gas cans at the station • made in the usa, fall branch, tn out of polypropylene plastic • vintage to new, we have the cap for you • never lose your yellow cap again • fits blitz, kolpin, rotopax, scepter and others • replacement gas can yellow cap & gas can vent free shipping to the lower 48 states (+ alaska & hawaii}, ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location (designed to fit the vintage blitz gas can spouts) vent installation pre-drill (with a 1/16″ drill bit) a small hole on top of the can, opposite side of the spout. This will keep dirt from getting in through the vent, while still allowing air to pass through. You may receive vents with a closed diaphragm, depending on the supplier, if this is the case we suggest using a paperclip to poke ~5 holes in the venting area (diaphragm). You are now ready to vent. Drill the final hole with a (31/64″), 1/2″ is close enough, boring bit. Be gentle when drilling, and check can for any debris now that you have your 1/2″ hole, install the vent by pushing firmly to seat or by tapping gently with a hammer.
Yellow Gas Can Cap That Fits Your Vintage Blitz Spout – 13 Single Caps & 13 Vents
- • Keeps dirt/debris out of your gas cans keeps your carburetors clean • no more gas fumes in your car after filling the gas cans at the station • made in the usa, fall branch, tn out of polypropylene plastic • vintage to new, we have the cap for you • never lose your yellow cap again • fits blitz, kolpin, rotopax, scepter and others • replacement gas can yellow cap & gas can vent free shipping to the lower 48 states (+ alaska & hawaii}, ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location (designed to fit the vintage blitz gas can spouts) vent installation pre-drill (with a 1/16″ drill bit) a small hole on top of the can, opposite side of the spout. You may receive vents with a closed diaphragm, depending on the supplier, if this is the case we suggest using a paperclip to poke ~5 holes in the venting area (diaphragm). If you want maximum air flow, drill the diaphragm out with a 7/64″ bit. Drill the final hole with a (31/64″), 1/2″ is close enough, boring bit. Be gentle when drilling, and check can for any debris now that you have your 1/2″ hole, install the vent by pushing firmly to seat or by tapping gently with a hammer. This will keep dirt from getting in through the vent, while still allowing air to pass through. Choose an area where the vent will be above the “full” line. You are now ready to vent.
Gas Can Replacement Spout Kit – Update Your Old Can Or Water Jug – 2 EZ POUR Spouts, 7 Piece Kit
- Easy flow action with superior manufacturing that won’t break down or spill. Spout works on many types of water or gas cans, check the ez pour website for full list. Ez-pour replacement spout and vent kit let’s you update old cans. Includes regular spout, reducer tip, spout caps, 2 base caps, vent cap, replacement vent. Include 2 spouts, one hi flow that can empty a can in 35 seconds.
Yellow Gas Can Cap That Fits Your Vintage Blitz Spout – 17 Single Caps & 17 Vents
- Drill the final hole with a (31/64″), 1/2″ is close enough, boring bit. If you want maximum air flow, drill the diaphragm out with a 7/64″ bit. Be gentle when drilling, and check can for any debris now that you have your 1/2″ hole, install the vent by pushing firmly to seat or by tapping gently with a hammer. You may receive vents with a closed diaphragm, depending on the supplier, if this is the case we suggest using a paperclip to poke ~5 holes in the venting area (diaphragm). This will keep dirt from getting in through the vent, while still allowing air to pass through. Choose an area where the vent will be above the “full” line. • Keeps dirt/debris out of your gas cans keeps your carburetors clean • no more gas fumes in your car after filling the gas cans at the station • made in the usa, fall branch, tn out of polypropylene plastic • vintage to new, we have the cap for you • never lose your yellow cap again • fits blitz, kolpin, rotopax, scepter and others • replacement gas can yellow cap & gas can vent free shipping to the lower 48 states (+ alaska & hawaii}, ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location (designed to fit the vintage blitz gas can spouts) vent installation pre-drill (with a 1/16″ drill bit) a small hole on top of the can, opposite side of the spout. You are now ready to vent.
Yellow Gas Can Cap That Fits Your Vintage Blitz Spout – 14 Single Caps & 14 Vents
- Be gentle when drilling, and check can for any debris now that you have your 1/2″ hole, install the vent by pushing firmly to seat or by tapping gently with a hammer. This will keep dirt from getting in through the vent, while still allowing air to pass through. You may receive vents with a closed diaphragm, depending on the supplier, if this is the case we suggest using a paperclip to poke ~5 holes in the venting area (diaphragm). • Keeps dirt/debris out of your gas cans keeps your carburetors clean • no more gas fumes in your car after filling the gas cans at the station • made in the usa, fall branch, tn out of polypropylene plastic • vintage to new, we have the cap for you • never lose your yellow cap again • fits blitz, kolpin, rotopax, scepter and others • replacement gas can yellow cap & gas can vent free shipping to the lower 48 states (+ alaska & hawaii}, ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location (designed to fit the vintage blitz gas can spouts) vent installation pre-drill (with a 1/16″ drill bit) a small hole on top of the can, opposite side of the spout. drill the final hole with a (31/64″), 1/2″ is close enough, boring bit. Choose an area where the vent will be above the “full” line. If you want maximum air flow, drill the diaphragm out with a 7/64″ bit. You are now ready to vent.
Gas Can Spout Cap – Install A Spout Cap And Update Your Old Can Today!
- Gas cap holder comes with strap to secure strap to holder. Fits both ez-pour universal and water spouts. Add an ez-pour spout cap to your gas spout today. Fits right over most spouts update your gas can today. Will also fit older briggs and stratton, rubbermaid, essence and gott cans.
Yellow Gas Can Cap That Fits Your Vintage Blitz Spout – 11 Single Caps & 11 Vents
- If you want maximum air flow, drill the diaphragm out with a 7/64″ bit. You are now ready to vent. • keeps dirt/debris out of your gas cans keeps your carburetors clean • no more gas fumes in your car after filling the gas cans at the station • made in the usa, fall branch, tn out of polypropylene plastic • vintage to new, we have the cap for you • never lose your yellow cap again • fits blitz, kolpin, rotopax, scepter and others • replacement gas can yellow cap & gas can vent free shipping to the lower 48 states (+ alaska & hawaii}, ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location (designed to fit the vintage blitz gas can spouts) vent installation pre-drill (with a 1/16″ drill bit) a small hole on top of the can, opposite side of the spout. Choose an area where the vent will be above the “full” line. You may receive vents with a closed diaphragm, depending on the supplier, if this is the case we suggest using a paperclip to poke ~5 holes in the venting area (diaphragm). Drill the final hole with a (31/64″), 1/2″ is close enough, boring bit. Be gentle when drilling, and check can for any debris now that you have your 1/2″ hole, install the vent by pushing firmly to seat or by tapping gently with a hammer. This will keep dirt from getting in through the vent, while still allowing air to pass through.
Yellow Gas Can Cap That Fits Your Vintage Blitz Spout – 12 Single Caps & 1 FREE Vent
- You are now ready to vent. Choose an area where the vent will be above the “full” line. Shipping charges to be calculated, so contact us first. Drill the final hole with a (31/64″), 1/2″ is close enough, boring bit. • Keeps dirt/debris out of your gas cans keeps your carburetors clean • no more gas fumes in your car after filling the gas cans at the station • made in the usa, fall branch, tn out of polypropylene plastic • vintage to new, we have the cap for you • never lose your yellow cap again • fits blitz, kolpin, rotopax, scepter and others • replacement gas can yellow cap gas can vent free shipping to the lower 48 states (+ alaska, hawaii, guam & pr), ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location (designed to fit the vintage blitz gas can spouts) vent installation pre-drill (with a 1/16″ drill bit) a small hole on top of the can, opposite side of the spout. Be gentle when drilling, and check can for any debris now that you have your 1/2″ hole, install the vent by pushing firmly to seat or by tapping gently with a hammer. We will ship international, buyer pays all shipping charges.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
