Extech DV26 Non-Contact Voltage Detector Plus Flashlight
- Suitable for outlets or against wire insulation testing, this pocket-sized dual range non-contact voltage detector combines two models in one. Includes two aaa batteries. Cat iv-1000v safety rating. Slim tip fits into outlet receptacles or against wire insulation testing. Suitable for outlets or against wire insulation testing. 100 to 1000vac, 50/60 hz range. Additional features include cat iv-1000v safety rating, audible and visual indication, rugged double molded housing, and a bright built-in led flashlight. Model dv40 combines a cat iii-1000v voltage detector (50 to 1000v) with an infrared thermometer that measures non-contact surface temperature from -20 to 445 degrees f (-30 to 230 degrees c). Flashing red led with audible beeper indicates presence of live wires. View larger non-contact voltage detector + flashlight quickly check for the presence of live wires before testing. Includes three lr44 batteries. Green led lights when powered on and ready to use indicates that battery is good. Designed for use on 50/60 hz circuits. For use on 50/60 hz circuits. Suitable for outlets or against wire insulation testing. What’s in the box comes with two aaa batteries and user guide. 11 distance to target ratio and fixed 0. View larger dv40 ncv voltage detector + ir thermometer quickly check for the presence of live wires before testing. Applications applications include electrical troubleshooting, plant/fm maintenance, building inspections, hvac/r repairs, and field service. Low range measures down to 24v and the high range measures up to 1000v. Includes two aaa batteries. View larger dv25 dual range ac voltage detector quickly check for the presence of live wires before testing. Other features of this detector is its led flashlight for illuminating dimly lit areas, rugged double molded housing, and cat iv-1000v safety rating. Built-in bright led flashlight and cat iv-600v safety rating. More extech instruments to choose from view larger dv20 non-contact voltage detector + flashlight the dv20 is a pocket-size, cat iv-rated non-contact voltage detector designed for quick voltage checks on live wires before testing. Complete with two aaa batteries. 95 emissivity covers 90 percent of surface applications. View larger dv24 wide range ncv detector + flashlight the dv24 provides fast, non-contact detection of ac voltage from 50 to 1000vac using red led indicator to indicate the presence of voltage.
Klein Tools NCVT-2 Dual Range Non-Contact Voltage Tester – 2 Pack by Klein Tools
- Auto power-off feature conserves and extends battery lifedigitally controlled on/off power buttonmicroprocessor controlled low-battery indicatorcat iv 1000 volt rating provides expanded operation and protectionlightweight, durable polycarbonate plastic resin construction with convenient pocket clip.
Digital Multimeter,HOLDPEAK 770HC Auto-Ranging Multi Tester with Non Contact Voltage Test Volt Amp Ohm Meter with Diode and Continuity Test
- Low battery indication & blacklit lcd 3 1/2 digit lcd display for visibility in dimly lit areas feature a low battery indicator so you never accidentally run out of juice. Non contact voltage test(ncv) shipped from usa and fulfilled by amazon when the detection of voltage is greater than 90v(rms), keep close to the conductor, the instrument sensor will light and buzz. Over load protection & continuity test use the ptc protection circuit for resistance, temperature and frequency measurement if measured resistance less than 100¦¸, the buzzer will sound. Package content 1x holdpeak 770hc digital multimeter, 2x 15v(aa) battery, 1x user’s manual, 1x test lead. Auto-ranging & auto-power offdc & ac current ( 600a range with ac/dc current clamp adapter), resistance, capacitor, frequency, duty cycle, temperature, transistor hfe.
Kingzer Original MASTECH MS8212A Pen Type Digital Multimeter/Multimetro DC AC Voltage Current Tester Diode Continuity Logic Non-contact Voltage
- 0%+5)dc current 20ma/200ma+-(1. 0%+3)continuity if measured resistance is less than 50¦¸, buzzer will sound. This multimeter is a professional, portable meter with a lcd screen. Package size 24 8 5cm / 9. 0 inpackage weight 278g / 9. 6 3. 5v 2 aaa batteries(not included). It is suitable for use in factories, schools, by enthusiasts and hobbyists. 5%+3)ac current 20ma/200ma+-(2. 8 ozpackage list1 original mastech ms8239d digital multimeter1 portable bag1 test cable2 test clip1 instruction manualbattery(not included) . Ii600v rohspower supply 1. 0%+3)resistance 200¦¸+-(1. 2 2. Specificationdc voltage 200mv/2v/20v/200v600v +-(0. 0%+3), 2k¦¸/20k¦¸/200k¦¸/2m¦¸+-(1. 8%+3), 600v+-(1. It is easy to use with one hand, overload protection provided, low battery indication. Diode test non-contact voltage(ncv)logic test iinput impedance 1m¦¸overload protection 250v dc or ac rmsfeaturesdisplay 2000 countspen-type designauto range and manual rangedc ac voltage, current, resistance, diode and continuity testlogic testnon contact voltage testauto power offdata holdmax holdsafety rating ce etl cat. 0%+1), 20m¦¸+-(1. 7%+2)ac voltage 200mv/2v/20v/200v+-(0.
Tekpower MS8211 Pen-Type Auto-Ranging Digital Multimeter with Non-contact AC Voltage Detector, Mastech MS8211¡
- Its unique non-contact ac voltage sensor is a great feature for electric inspection, the maximum detection distance can be as far as 6 inches depending on the adjustable sensitivity. 5v (aaa) x 2, size 208 x 38 x 29mm, weight approx. 2%, continuity test, diode test, non-contact ac voltage detector, power 1. Features conforms to the iec1010-1 standard cat iii 600v over-molding rubber case protects meter, display 1,999 counts, auto/manual range, maximum value hold, data hold, auto power off retractable tip, sensitivity of ac voltage adjustable, sound and flash alarm. 5v (aaa) x 2, carrying bag, manual, test lead. Technical specifications” dcv 200m/2/20/200/600v +/-0. What’s in the box mastech ms8211 pen-type dmm, battery 1. 110g (including batteries). The tekpower ms8211 is a pen-type digital multimeter with non-contact ac voltage sensor, it can measure ac/dc voltage, resistance, diode and continuity test. 8%, resistance 200/2k/20k/200k/2m/20m +/-1. 7%, acv 200m/2/20/200/600v +/-0.
174300 Switch Cabinet Key “Electrical” 153mm with Non-Contact Voltage Detector
- Push button for on/off. Temperature range 0 °c, 40 °c. Detecting alternating currents also without current flow. Double rotation mechanism for three different closures. 5 v button cells, commercially available, included in the standard delivery. Cable breaks or cable detachments are also detected. Can be used universally in electrical engineering, gas and water supply, air conditioning and ventilation technology, industry and many more. Measuring range 50 v, 600 v, 50 hz – 60 hz. Visual indicator of operational readiness. Voltage sensor for reliable detection of alternating current on cable connections, power sockets, fuses, circuits, connection sockets, lamps, light strings. Power supply 2 x 1. Dc marking, ce marking.
Amprobe VP-1000SB Non-Contact Voltage Probe with Shaker, CAT IV 1000 V
- Alerts you with a bright led light, loud clear tone and vibration when when voltage from 90, 1000v ac is detected (compare to our vp-1000 model, with only a light alert). 100% safety guaranteed dual insulated, cat iv 1000v safety rating, no exposed metal or conductive parts. Easy to use always on, no buttons, simply touch and test. An essential tool when checking for voltage in your home simply hold the vp-1000sb next to the system to test, including extension cords, light sockets/outlets, gfci protected outlets, and light fixtures.
Extech MN26V MiniTec Digital MultiMeter with Non-Contact Voltage Detector
- 10a fuse protection. Ac/dc voltage and current, resistance, capacitance, frequency, temperature, duty cycle, diode/continuity. Overload protection and indication. It does not include a temperature probe. Large 2000 count lcd display. Relative zero, data hold, range hold and auto power off.
Amprobe 5XP-A Compact DMM with Non-Contact Voltage
- It is a manual-ranging meter and required the operator to choose the appropriate operating range for the property being measured. The amprobe 5xp-a digital multimeter with built-in non-contact voltage detector is an average-sensing, manual-ranging meter for measuring current, voltage, and resistance in electrical testing applications. Multimeters display information either in analog or digital form. 46 lb. 26 inches /155 × 72 × 32 mm (h x w x d)h is height, the vertical distance from the lowest to highest point w is width, the horizontal distance from left to right d is depth, the horizontal distance from front to back. /210 gmeter dimensions6. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Safety ratings are based on the international electrotechnical commission’s (iec) standards for low-voltage test equipment. The company was founded in 1948 and is headquartered in everett, wa. The meter has a 2,000-count resolution, meaning it can display up to 1,999 units (3-1/2 digits) before the operating range needs to be changed. Amprobe manufactures electrical testing equipment for commercial, industrial, and home use. Iec 61010 delineates four overvoltage installation categories. The meter comes with a magnetic strap that can be used to hang the meter on metal doors or fixtures. The hold function keeps a reading on the display, even after the meter is disconnected. The maximum or minimum reading mode displays the highest or lowest reading in a session to track a sudden increase or decrease in measurements. This average sensing, or average responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. An audible continuity sensor confirms that the circuit conducts electricity, and a diode test detects whether the circuit’s diodes work properly. 5v and 9v batteries. A low-battery indicator signals when the meter’s batteries need to be replaced. The battery test feature checks the amount of charge remaining in standard 1. The meter’s non-contact voltage detector senses ac voltage without making contact with the circuit. 10 x 2. Specifications maximum alternating current (ac) input200 milliampmaximum direct current (dc) input200 milliampmaximum ac voltage input750 volts (v)maximum dc voltage input1,000vnon-contact ac voltage detection range70 to 600vmaximum resistance detected20 megaohmspower supply9v neda 1604, jis 006p, or iec 6f22 battery (one, installed)fuse0. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltages. 315 amp/1,000v fast-blow ceramic fuse (one, installed)standards meteuropean conformity (ce) international electrotechnical commission (iec) and european normal (en) safety standard 61010-1 canadian standards association (csa)weight0. Multimeters are electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. It meets international electrotechnical commission (iec) safety standard 61010 and is certified for category i installations up to 1,000v (which covers protected electrical equipment such as small household appliances), category ii installations up to 600v (which covers large household appliances and devices connected to a fixed power supply, such as refrigerators and air conditioners), and category iii installations up to 300v (which covers items used with enclosed building circuit installations, such as service panel parts, branch circuits, and fixed installations that are connected directly to a building’s ac power supply). Available in handheld or benchtop models, multimeters diagnose electrical problems in electrical equipment, wiring, and power supplies. 315 amp/1,000v fast-blow ceramic fuse (installed)magnetic strap holsterinstructions. In general, a meter with a category iv rating will provide more protection against transient voltages than a meter with a lower category rating. The meter comes with a set of detachable test leads that measure alternating current (ac) and direct current (dc) to 200 milliamp, ac voltage to 750 volts (v), dc voltage to 1,000v, and resistance to 20 megaohms. 83 x 1. What’s in the boxamprobe 5xp-a average-sensing digital multimeter(1) set test leads(1) 9v battery (installed)(1) 0.
Amprobe AM-510 Commercial/Residential Multimeter with Non-Contact Voltage Detection
- Full-featured with non-contact voltage detection, audible continuity and diode test. Durable, rubber overmolded enclosure. Measures voltage up to 600v ac/dc, ac/dc current and resistance, frequency, capacitance, duty cycle, battery test. Large backlit lcd display with data hold and relative zero mode. Safety rated cat iii 600v.
Mastech MS8211 Pen-Type Auto-Ranging Digital Multimeter with Non-contact AC Voltage Detector
- 8%, resistance 200/2k/20k/200k/2m/20m +/-1. Technical specifications” dcv 200m/2/20/200/600v +/-0. What’s in the box mastech ms8211 pen-type dmm, battery 1. 110g (including batteries). 7%, acv 200m/2/20/200/600v +/-0. 5v (aaa) x 2, size 208 x 38 x 29mm, weight approx. 2%, continuity test, diode test, non-contact ac voltage detector, power 1. Its unique non-contact ac voltage sensor is a great feature for electric inspection, the maximum detection distance can be as far as 6 inches depending on the adjustable sensitivity. The mastech ms8211 is a pen-type digital multimeter with non-contact ac voltage sensor, it can measure ac/dc voltage, resistance, diode and continuity test. Features conforms to the iec1010-1 standard cat iii 600v over-molding rubber case protects meter, display 1,999 counts, auto/manual range, maximum value hold, data hold, auto power off retractable tip, sensitivity of ac voltage adjustable, sound and flash alarm. 5v (aaa) x 2, carrying bag, manual, test lead.
Amprobe ACDC-400 TRMS Digital Clamp Multimeter 400A AC/DC with VolTect Non-Contact Voltage Detection
- Max/min recording. True rms (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, where the current or voltage has a sinusoidal or nonsinusoidal waveform. Relative measurement. Data hold. Meets international electrotechnical commission (iec) safety standard 61010 and is certified for category iii installations up to 600v. Resistance measurement. Accommodates conductors up to 118 inches (30mm) in diameter. Digital clamp meter measures alternating current (ac) and direct current (dc) to 400 amp, ac voltage and dc voltage to 600 volts (v), resistance to 40 megaohms. Relative zero mode stores a reading in memory to use as a zero point for subsequent readings, allowing quick comparison of multiple readings. Clamp with a 11″ (27 mm) jaw opening measures current without touching or interrupting the circuit.
Extech DV30 Non-Contact Adjustable AC Voltage Detector
- Complete with four lr44 button batteries and pocket clip. Ac voltage detection from 12 volt to 600 vac cat iii-600 volt safety rating. Key features non-contact detection of ac voltage from 12vac to 600vac sensitivity adjustment increases or reduces sensor trigger threshold audible and visible voltage indication self test function small size with pocket clip specifications voltage sensitivity 12v to 600vac (50 to 500hz) operating temperature/humidity -10°c to 50°c (14 to 122°f) storage temperature -20 to 60oc (-4 to 140°f) relative humidity. Extech dv30 non-contact adjustable ac voltage detector, non-contact detection of ac voltage from 12vac to 600vac, audible and visible voltage indication, self test function the dv30 is an ncv detector with a sensitivity adjustment to pinpoint the voltage source.
Extech DM220 CAT IV Mini Pocket MultiMeter with Non-Contact Voltage Detector
- Ac amps 200ma, max. Dc volts 600, max. Ohms 40 megohm, instrument frequency counter range 0. /Max. Range no temp, display lcd, bar graph no , min. 100 uf to 200 uf, temp. 80 percent of reading + 2 digits, cat iv 600v, cat iii 1000v, max. 001 hz to 10 khz, capacitance range 0. Ac volts 600, max. ‘ Digital multimeter, pocket, basic features, 4000 instrument counts, basic dc accuracy +/-0. Memory no, data logging no, calibration certificate included no ‘. Dc amps 200ma, audible continuity yes, max.
General Tools CM660 Dual Display Amp Clamp with AC/DC Amps, True RMS, Non-Contact Voltage Detector, 750V, 600A, 0.01A Resolution
- Features 16 functions, 49 ranges and large backlit digital lcd. Two 6000-count readouts for simultaneous display of real-time current or voltage on primary readout and line frequency on secondary readout. Measures temperature from -58 to 1112 degrees f (-50 to 600 degrees c) using included k type stem thermocouple. Built-in non-contact voltage (ncv) detector with 4 sensitivity settings and audible and visual alerts. Uses beeper to verify integrity of diodes and check circuits for continuity.
TRMS Digital Multimeter eM860T by ennoLogic – Auto Ranging DMM, Voltage, Current, Resistance, Capacitance, Frequency, Temperature, Non-Contact Voltage Detect, Carrying Case
- Compliant with iec 61010-12001, cat iii 1000 volt and cat vi 600 volt overvoltage standards durable heavy-duty housing with protective rubber sleeve for mechanical protection comes with carrying case, user manual, 9v battery, test leads, and type k thermocouple probe for temperature readings 10-year warranty, hassle-free replacement guarantee, and 100% money back guarantee. Trms (true root-mean-square) values for all ac measurements very accurate millivolt range accurate to 05% of reading microamp (600ua, 6000ua), milliamp (60ma,600ma), and amp (6a,10a) current ranges small burden voltage in ua and ma current ranges for better accuracy shunt resistance of 100ohms for ua ranges and 1 ohm for ma ranges. Professional multipurpose true rms multimeter for electricians, home and automotive uses, perfect for electronic projects accurately measure voltage, current, resistance, capacitance, temperature, frequency, and duty cycle portable multitester for household, hvac, automobile, industrial and field applications true-rms voltmeter, ammeter, ohmmeter, conductivity checker, capacitor and resistor tester, thermometer, and ncv (contactless) voltage detector all in one handheld precision tool. Large easy-to-read digital display with 6000 counts for high accuracy features a handy relative measurement function, max/min display, and data hold function select auto ranging or manual ranging bright backlight (15 seconds) auto-power off after 15 minutes (can be disabled by user). Fast response and quick power up fast resistance measurements at accuracies of 05% for most resistance ranges (15% above 6 megohm) also features audible continuity check and diode test function non-contact voltage detect function is useful for proximity voltage detection in power cords, cables, wires, circuit breakers, electrical fixtures, outlets and switches (bar display and buzzer).
HOLDPEAK 838L Manual-Ranging Digital Multimeter for Measuring AC DC Voltage, DC Current, Resistance, Diodes, Transistors, Temperatures with Non Contact Voltage Test
- ✔【Non contact voltage test (ncv) 】when the detection of voltage is greater than 90v(rms), keep close to the conductor, our instrument sensor will light and buzz. ✔【Low battery indication & backlit lcd】3 1/2 digit lcd display for visibility in dimly lit areas feature a low battery indicator so you never accidentally run out of juice. ✔【Manual-ranging & auto-power off】1999 counts manual-ranging multimeter accurately measure ac/dc voltage, dc current, resistance, diode, hfe. ✔【What u get】1x holdpeak 838l digital multimeter multi tester, 1x user’s manual, 1x test lead package doesn’t contain battery. ✔【overload protection & continuity test】use the ptc protection circuit for resistance, temperature and frequency measurement if measured resistance less than 100ohm, the buzzer will sound.
Dr.meter Digital Multimeter Tester Non-Contact Voltage Detection Multi Meter (Standard Multimeter)
- Compact and handheld size, protective rubber sleeve for drop protection. Built-in support stand for hands free use, input overload protection within dc 1000v or ac 600v increases safety use. 6000 counts digit display, it accurately measures ac/dc voltage and current, resistance, diode, transistor, continuity, frequency, capacitance and live line test. Data hold and an easy-to-read lcd backlit display for visibility in dimly lit areas. Back led light illuminates objects under test and ncv detector senses near ac voltage, making measure more convenient and safe.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
