Stanley Fatmax 62-565 T20 X 4 Inch Star Screwdriver
- A permanent tip symbol on the handle helps make tip identification easy lacquer coated bar to resist rust. Limited lifetime warranty. Bar molded into handle for greater torque. A permanent tip symbol on the handle helps make tip identification easy lacquer coated bar to resist rust. High performance screwdrivers meet or exceed ansi standards. Ergonomically designed tri-lobular handle for torque and comfort.
Bestpriceam 8 in 1 Pocket Precision Screwdriver Bit Set Torx Star Phillips Repair Tool Kit (Red)
- Length 115cm, diameter 13cm. Sot the bit into the top end of the drive it can beheld in position by the built-in magnet, great for home, office, electronics, and hobby. Open the cap before use, choose a suitable bit form the 8 different ones stored inside. This screwdriver set is portable, it has pocket clip, bits can be stored in handle. Engraved pattern promises comfortable touch and labor-saving performance.
Star Drive Screwdriver Set, 6-Piece, CSDT6
- Size sd-10, sd-15, sd-20, sd-25, sd-27 and sd-30. Hardened and tempered chrome vanadium steel shafts. Square mechanic’s vinyl handle develops maximum driving force. Durable chrome plated finish resists corrosion. Bonus storage rack w/mounting screws.
Shop-Tek T40 Star Drive Screwdrivers 4-Inch
- Shaft overall length 4-inch. Professional clear handle. Precision ground tips fit screw heads tightly. Full chrome vanadium steel shafts for strength and durability. Star t-40 tip.
Wera 05074784001 Star Drive Screwdrivers
- Suitable for bits with ¼” hexagon head drive as per din iso 1173-c 6. 3 (iso 1173). Simple adjustment of the required torque value without any special tools. Dependable protection against electrostatic energy and associated damage. Wera torque screwdriver. Variable torque setting option with highest precision. Rapidaptor quick-release technology for rapid bit change. Multi-component kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Easy-to-read scale value. 3 and e 6. Unlimited torque to loosen seized screws.
Shop-Tek T25 Star Drive Screwdrivers 4-Inch
- Precision ground tips fit screw heads tightly. Full chrome vanadium steel shafts for strength and durability. Star t-25 tip. Shaft overall length 4-inch. Professional clear handle.
Bondhus 34520 T20 Star Tip Screwdriver with ProGuard Finish, 5.4″, 2 Piece
- Burr free tool tips help tools seat fully in screw head. The broad contact surface provides deep lobe engagement and the straight, vertical sidewalls increase tool engagement and virtually eliminates camout. Torx tip screwdrivers fit all torx and star screws. Precision machined tips transfer more torque to the screw and reduce stripping.
Wera 05074828001 Star Drive Screwdrivers
- Unlimited torque to loosen seized screws. Suitable for bits with ¼” hexagon head drive as per din iso 1173-c 6. 3 (iso 1173). The torque value can be modified within a specific measurement range. Comes with pre-set torque value for all applications where the same, constant torque and repeat accuracy are required. Wera torque screwdriver. Secure protection against electrostatic charge and associated damage. Multi-component kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Rapidaptor quick-release technology for rapid bit change. 3 and e 6.
Shop-Tek 34179 T50 Star Drive Screwdrivers, 5/16″ x 6″
- Full chrome vanadium steel shafts for strength and durability. Professional clear handle. Precision ground tips fit screw heads tightly. Shaft overall length 4-inch. Star t-50 tip.
Wera 05074826001 Star Drive Screwdrivers
- 3 and e 6. Multi-component kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Wera torque screwdriver. Rapidaptor quick-release technology for rapid bit change. The torque value can be modified within a specific measurement range. Unlimited torque to loosen seized screws. Comes with pre-set torque value for all applications where the same, constant torque and repeat accuracy are required. 3 (iso 1173). Suitable for bits with ¼” hexagon head drive as per din iso 1173-c 6. Secure protection against electrostatic charge and associated damage.
Wera 05135942001 Star Drive Screwdrivers
- 1 holder 813 r kraftform with rapidaptor quick-release chuck, multi-component for high working speeds and particularly ergonomic screwdriving. 9 wera bits.
Shop-Tek T27 Star Drive Screwdrivers 4-Inch
- Precision ground tips fit screw heads tightly. Shaft overall length 4-inch. Full chrome vanadium steel shafts for strength and durability. Star t-27 tip. Professional clear handle.
Wera 05074804001 Star Drive Screwdrivers
- Hios, delvo, sehan). Bits suitable for manual as well as power tool operations with electric screwdrivers (e. Power zone with integrated soft zones for the transfer of higher tightening and loosening torque. Tamperproof. Electrical surface resistance of < 109 ohm for secure protection against electrostatic charge. Compact handle/interchangeable blade system for torque controlled precision screwdriving. 0 to 11. Handle/interchangeable blade system for rapid blade change. Unlimited manual loosening torque. Distinct audible and perceivable excess load signal when the pre-set torque value is reached. Kaftform micro handle with twist cap and free-turning zone for rapid twisting, making any time-consuming repositioning of the fingers unnecessary. The kraftform micro esd torque screwdriver is ideal for torque controlled jobs on electrostatically-susceptible components. Suitable for the take-up of bits with 4 mm half-moon drive (wera series 9) and 4 mm hios drive (wera series 21). 0 cnm (accuracy +- 10%). To change the bit, simply push the sleeve forward and remove. Precision zone directly above the blade for the right angle for adjustment work. Manufactured in accordance with din en 61340-5-1. Applications for example on smartphones, cell phones, cameras, electrical appliances, in dental labs and dental surgeries. G. Rapid fixing of the bit just push the bit into the insert for automatic locking and a secure fit. Torque tool with adjustable torque of 5. Free-turning sleeve for simple guidance of the tool during the screwdriving process.
Wera 05074842001 Star Drive Screwdrivers
- Suitable for bits with ¼” hexagon head drive as per din iso 1173-c 6. Wera torque screwdriver. Unlimited torque to loosen seized screws. Rapidaptor quick-release technology for rapid bit change. Secure protection against electrostatic charge and associated damage. 3 (iso 1173). Comes with pre-set torque value for all applications where the same, constant torque and repeat accuracy are required. 3 and e 6. Multi-component kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. The torque value can be modified within a specific measurement range.
Wera 05074824001 Star Drive Screwdrivers
- Unlimited torque to loosen seized screws. 3 and e 6. Comes with pre-set torque value for all applications where the same, constant torque and repeat accuracy are required. 3 (iso 1173). Multi-component kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. The torque value can be modified within a specific measurement range. Secure protection against electrostatic charge and associated damage. Suitable for bits with ¼” hexagon head drive as per din iso 1173-c 6. Wera torque screwdriver. Rapidaptor quick-release technology for rapid bit change.
Wera 05074752001 Star Drive Screwdrivers
- For kraftform kompakt vde blades the handle/interchangeable blade system allows a rapid exchange of the blade and thereby diverse applications. Torque vde holder for safe work up to 1,000 volts. Unlimited manual loosening torque. 2 nm. Adjustable torque value from 0. 3-1. Distinct audible and perceivable excess load signal when the pre-set torque value is reached.
Wera 05074780001 Star Drive Screwdrivers
- Multi-component kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Rapidaptor quick-release technology for rapid bit change. Dependable protection against electrostatic energy and associated damage. 3 and e 6. 3 (iso 1173). Easy-to-read scale value. Variable torque setting option with highest precision. Simple adjustment of the required torque value without any special tools. Unlimited torque to loosen seized screws. Suitable for bits with ¼” hexagon head drive as per din iso 1173-c 6. Wera torque screwdriver.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
