15 Best and Coolest Otc Tools & Equipment

 

OTC Tools Equipment Cylinder Liner Puller OTC-J-45876 #ad

OTC Tools & Equipment Cylinder Liner Puller (OTC-J-45876)

OTC Tools & Equipment Cylinder Liner Puller (OTC-J-45876) #ad - Otc tools & equipment cylinder liner puller (otc-j-45876).

 

OTC Tools Equipment Bushing Remover OTC-314511 #ad

OTC Tools & Equipment Bushing Remover (OTC-314511)

OTC Tools & Equipment Bushing Remover (OTC-314511) #ad - Otc tools & equipment injector fuel sleeve remover (otc-303-768). Otc tools & equipment plug (otc-314392). Otc tools & equipment bushing remover (otc-314511). 4 adapters (1/4″, 5/16″, 1/2″ and 5/8″) with schrader valves to prevent spray.

 

OTC Tools Equipment Timing Chain Wedge OTC-522893 #ad

OTC Tools & Equipment Timing Chain Wedge (OTC-522893)

OTC Tools & Equipment Timing Chain Wedge (OTC-522893) #ad - Master torx bit socket setspecifications. Otc tools & equipment tube (otc-314299). Otc tools & equipment tube, receiving (otc-222307). Otc tools & equipment gm camshaft holding tool (otc-en-46105). Otc tools & equipment timing chain wedge (otc-522893).

 

OTC Tools Equipment Receiving Tube 2-14 for Ball Joint Service OTC-222306 #ad

OTC Tools & Equipment Receiving Tube 2-1/4″, for Ball Joint Service (OTC-222306)

OTC Tools & Equipment Receiving Tube 2-1/4″, for Ball Joint Service (OTC-222306) #ad - Otc tools & equipment plug (otc-314392). Otc tools & equipment kit, seal repair (otc-504778). Otc tools & equipment bushing remover (otc-314511). Otc tools & equipment receiving tube 2-1/4″, for ball joint service (otc-222306).

 

OTC Tools Equipment Crank Shaft TDC Timing PEG OTC-303-507 #ad

OTC Tools & Equipment Crank Shaft TDC Timing PEG (OTC-303-507)

OTC Tools & Equipment Crank Shaft TDC Timing PEG (OTC-303-507) #ad - Otc tools & equipment crank shaft tdc timing peg (otc-303-507).

 

OTC Tools Equipment Wheel 1788A Replacement OTC-520705 #ad

OTC Tools & Equipment Wheel, 1788A Replacement (OTC-520705)

OTC Tools & Equipment Wheel, 1788A Replacement (OTC-520705) #ad - Otc tools & equipment wheel, 1788a replacement (otc-520705). Otc tools & equipment injector fuel sleeve remover (otc-303-768). 4 adapters (1/4″, 5/16″, 1/2″ and 5/8″) with schrader valves to prevent spray. Otc tools & equipment plug (otc-314392).

 

OTC Tools Equipment 53 PC MSTR TORX BIT SOCKETS OTC-5900A-PLUS #ad

OTC Tools & Equipment 53 PC MSTR TORX BIT SOCKETS (OTC-5900A-PLUS)

OTC Tools & Equipment 53 PC MSTR TORX BIT SOCKETS (OTC-5900A-PLUS) #ad - Otc tools & equipment 53 pc mstr torx bit sockets (otc-5900a-plus).

 

OTC Tools Equipment Receiving Cup 2-14 OD x 2 x 716 OTC-204508A #ad

OTC Tools & Equipment Receiving Cup, 2-1/4″ O.D x. 2″ x 7/16″ (OTC-204508A)

OTC Tools & Equipment Receiving Cup, 2-1/4″ O.D x. 2″ x 7/16″ (OTC-204508A) #ad - Otc’s ball joint, u-joint, and brake anchor pin service kit removes and installs press-fit parts such as ball joints, universal joints, and truck brake anchor pins. Sturdy blow molded hard case keeps contents protected and secure when not in use. Contains 3 receiver tubes, 2-3/4 inch id x 3 inch od, 2-1/4 inch id x 2-1/2 inch od, and 1-3/4 inch id x 2 inch od. Otc tools & equipment receiving cup, 2-1/4″ od x 2″ x 7/16″ (otc-204508a). Clamp frame features heavy duty materials and construction to prevent distortion in severe use cases.

 

OTC Tools Equipment Lower ARM Ball Joint Separator OTC-204-592 #ad

OTC Tools & Equipment Lower ARM Ball Joint Separator (OTC-204-592)

OTC Tools & Equipment Lower ARM Ball Joint Separator (OTC-204-592) #ad - Use with sockets and bit holders to get into hard-to-reach places including under dashboards and in engine bays to remove bolts once loosened. Designed for repetitive daily use and backed with a lifetime warranty. This versatile tool magnetically attaches to pre-loosened oil pan drain plugs so you can remove them without dropping or getting burned by hot oil. The flexible shaft can be used in virtually any location and held at just about any position and still thread or unthread the plug as desired, all while keeping your hand out of the oil stream. Otc tools & equipment lower arm ball joint separator (otc-204-592).

 

OTC Tools Equipment FuelTransmission LINE RELEAS OTC-307-569 #ad

OTC Tools & Equipment Fuel/Transmission LINE RELEAS (OTC-307-569)

OTC Tools & Equipment Fuel/Transmission LINE RELEAS (OTC-307-569) #ad - Push-puller legs. Package quantity 1. 1106, leg length 9-05 in extra legs (pair). 938 push-puller, (reach equals leg length plus 2 in with leg end caps). Otc tools & equipment fuel/ transmission line releas (otc-307-569).

 

OTC Tools Equipment OTC-1106 Puller Legs - Pair - Long - 950 in #ad

OTC Tools Equipment OTC-1106 Puller Legs – Pair – Long – 9.50 in.

OTC Tools Equipment OTC-1106 Puller Legs – Pair – Long – 9.50 in. #ad - Package quantity 1. Push-puller legs. 1106, leg length 9-05 in extra legs (pair). 938 push-puller, (reach equals leg length plus 2 in with leg end caps). Excellent quality.

 

OTC Tools Equipment Tube Receiving OTC-222307 #ad

OTC Tools & Equipment Tube, Receiving (OTC-222307)

OTC Tools & Equipment Tube, Receiving (OTC-222307) #ad - Otc tools & equipment tube, receiving (otc-222307). Satisfaction ensured. Otc tools & equipment tube (otc-314299). Otc tools & equipment gm camshaft holding tool (otc-en-46105). Master torx bit socket setspecifications.

 

OTC Tools Equipment Receiving Cup OTC-314425 #ad

OTC Tools & Equipment Receiving Cup (OTC-314425)

OTC Tools & Equipment Receiving Cup (OTC-314425) #ad - Otc tools & equipment receiving cup (otc-314425). This versatile tool magnetically attaches to pre-loosened oil pan drain plugs so you can remove them without dropping or getting burned by hot oil. Use with sockets and bit holders to get into hard-to-reach places including under dashboards and in engine bays to remove bolts once loosened. Otc tools & equipment rear crankshaft seal installer- gm & chevrolet (otc-j-44642). Otc tools & equipment lower arm ball joint separator (otc-204-592).

 

OTC Tools Equipment Adapter Tube OTC-557210 #ad

OTC Tools & Equipment Adapter Tube (OTC-557210)

OTC Tools & Equipment Adapter Tube (OTC-557210) #ad - Otc tools & equipment 30 water pump pulley rmv/rep (otc-303-s455). Otc tools & equipment adapter tube (otc-557210). Otc tools & equipment c frame (otc-41925). Otc tools & equipment receiving cup (otc-314425). Otc tools & equipment rear crankshaft seal installer- gm & chevrolet (otc-j-44642).

 

OTC Tools Equipment SOCKET PULLER OTC-J37073 #ad

OTC Tools & Equipment SOCKET PULLER (OTC-J37073)

OTC Tools & Equipment SOCKET PULLER (OTC-J37073) #ad - Otc otc-3896-ltw, 1yr evolve subscription. Otc tools & equipment socket puller (otc-j37073). Master torx bit socket setspecifications. Otc tools & equipment timing chain wedge (otc-522893). Otc tools & equipment tube, receiving (otc-222307).





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.